Page 1
Dishwasher
Instruction
InstructionInstruction
Instruction Manual
Manual Manual
Manual
'6,
Page 2
1
ENGLISH
CONTENTS
Getting familiar with your machine
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety information and Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing the machine
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparing the machine for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Loading your dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching on the machine and selecting a programme . . . . . . . . . . . . . . . . . .
Maintenance and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Failure codes and what to do in case o ailure
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Practical and useful information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
• Conformity with the standards and Test data . . . . . . . . . . . . . . . . . . . . . . . . . 3
• Recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
• Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 4
• Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
• Items not suitable for dishwashing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
• Positioning the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
• Water connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
• Water inlet hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
• Water outlet hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
• Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
• Prior to using the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
• The importance of water decalcification . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• Filling with salt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• Testing strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
• Adjusting salt consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
• Detergent usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
• Filling the detergent compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
• Combined detergent .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
• Filling with rinse aid and making the setting . . . . . . . . . . . . . . . . . . . . . . . . . . 17
• Top Basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• Lower Basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• Alternative basket loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• Programme items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• Switching on the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• Programme follow-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• Changing a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• Changing a programme with resetting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• Switching the machine off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• Spray arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• Hose filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
13
13
13
24
26
26
2
7
27
28
28
29
31
. . . . . . . . .
25
25
25
25
23
21
19
18
18
Page 3
1.
Upper basket with racks
2.
Upper spray arm
3.
Lower basket
4.
Lower spray arm
5.
Filters
6.
Rating plate
7.
Control Panel
8.
Detergent and rinse-aid dispenser
9.
Cutlery basket
10.
11.
Salt dispenser
Upper basket track latch
2
Active drying unit: This system provides
better drying performance for your dishes.
12
Page 4
3
Capacity 12 place settings
Height 820 mm - 870mm
Width 596 mm
Depth 550 mm
Net Weight 41 kg
Electricity input 220-240 V, 50 Hz
Total Power 2200 W
Heating Power 2000 W
Pump Power 100 W
Drain Pump Power 30 W
Water supply pressure 0.03 MPa
(0,3 bar)-1 MPa (10 bar)
Current 10 A
Technical specifications
Producer company has its right to amend design and technical
specifications reserved.
Conformity with the standards and Test data / EC Declaration
of Conformity
All stages related to the machine are executed in accordance
with the safety rules provided in all relevant directives of the
European Community. 2004/108/EC, 2006/95/EC,IEC 436/DIN
44990, EN 50242
Important Note for User:For softcopy of this user manual,
please contact following address:
"dishwasher@standardtest.info”.In your e-mail, please
provide the model name and serial number (20 digits) which
you can find on the appliance door.
Page 5
4
SAFETY INFORMATION AND RECOMMENDATIONS
Recycling
• Certain components and the packaging of your machine
have been produced from recyclable materials.
• Plastic parts are marked with international abbreviations:
(>PE< , >PS< , >POM<, >PP<, )
• Cardboard parts have been produced from recycled paper
and they should be disposed of into waste paper collection
containers for recycling.
• Such materials are not suitable for being disposed of into
garbage bins. They should be delivered to recycling centres
instead.
• Contact relevant centres in order to obtain information on
methods and points of disposal.
Safety Information
When you take delivery of your machine
• Check for any damage to your machine or to its packaging.
Never start a machine damaged in any way, make sure to
contact an authorised service.
• Unwrap the packaging materials as indicated and dispose
of them in accordance with the rules.
The points to pay attention during machine installation
•
Choose a suitable, safe and level place to install your
machine.
• Carry out the installation and connection of your machine by
following the instructions.
•
This machine should be installed and repaired by an
authorised service only.
• Only original spare parts should be used with the machine.
• Before installing, be sure that the machine is unplugged.
Page 6
5
• Check whether the indoor electrical fuse system is connected
according to the regulations.
• All electrical connections must match the values indicated
on the rating plate.
• Pay special attention and be sure that the machine does not
stand on the electricity supply cable.
• Never use an extension cord or a multiple socket for making
a connection. The plug should be comfortably accessible
after the machine has been installed.
• After installing the machine to a suitable place, run it unloaded
for the first time.
In daily use
• This machine is for household use; do not use it for any
other purpose. Commercial usage of the dishwasher will void
the guarantee.
• Do not get up, sit or place a load on the open door of the
dishwasher, it may fall over.
• Only put detergent and rinse aids, which are produced
specifically for dishwashers, into the dishwasher. Our
company will not be responsible for any damage that might
occur in your machine otherwise.
• The water in the machine's washing section is no drinking
water do not drink it.
• Due to danger of explosion, do not put into the machine’s
washing section any chemical dissolving agents such as
solvents.
• Check whether plastic items are heat-resistant before
washing them in the machine.
•This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
Page 7
6
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance.Cleaning
and user maintenance shall not be made by children without
supervision.
• Do not put any items, which are not suitable for dishwashing,
into your machine. Do not fill any basket above its capacity.
Our company
will not be responsible for any scratch or rust to
form on the
inner frame of your machine due
to basket
movements
otherwise.
• Especially because hot water may flow out, the machine
door should not be opened under any circumstances while
the machine is in operation. In any case, a safety devices
ensures that the machine stops if the door is opened.
• Do not leave your dishwasher’s door open. Failure to do so
may lead to accidents.
• Place knives and other sharp-ended objects in the cutlery
basket in blade-down position.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
•This appliance is not intended for use by persons (including -
children) with reduced physical,sensory or mental capabilities,
or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• If EnergySave option is selected as "Yes", The door will be
opened at the end of the program. Do not force to close the
door to avoid harm auto door mechanism during 1 minutes.
The door must be open during 30 minutes to get effective
drying.( in models with auto door opening system )
Warning: Do not stand in front of the door after the signal
sounds belonging auto-open.
Page 8
7
For your children’s safety
• After removing the machine’s packaging, make sure that the
packaging material is out of reach of children.
• Do not allow children to play with or start the machine.
• Keep your children away from detergents and rinse aids.
•
Keep children away from the machine while it is open
because there may still be residues of cleaning substances
inside the machine.
• Be sure that your old machine does not pose any threat to
your children. Children are known to have gotten themselves
locked in old machines. To forestall such a situation, break
your machine's door lock and tear off the electrical cables.
In case of malfunctioning
• Any malfunction in the machine should be repaired definitely
by qualified persons. Any repair work performed by anyone
other than the authorised service personnel will cause your
machine to be left outside the scope of warranty.
• Prior to any repair work on the machine, be sure that the
machine is cut off from the mains.Switch off the fuse or unplug
the machine.Do not pull by the cable when unplugging. Make
sure to turn off the water tap.
Recommendations
• For energy and water saving, remove coarse residues on
your dishes before placing the dishes into the machine. Start
your machine after having fully loaded it.
• Use the pre-wash programme only whenever necessary.
• Place such hollow items as bowls, glasses and pots into the
machine in such a way that they will face down.
• You are recommended not to load into your machine any
dishes different or more than indicated.
Page 9
8
Items not suitable for dishwashing:
• Cigarette ashes, candle leftovers, polish, paint, chemical
substances, iron-alloy materials;
• Forks, spoons and knives with wooden or bone, or ivory or
nacre-coated handles; glued items,items soiled with abrasive,
acidic or base chemicals.
• Plastic items that are not heat-resistant, copper or tin-coated
containers.
• Aluminium and silver objects (they may discolour, become
dull).
•
Certain delicate glass types, porcelains with ornamental
printed patterns as they fade even after the first wash; certain
crystal items as they lose their transparency over time,
adhered cutlery that is not heat-resistant, lead crystal glasses,
cutting boards, items manufactured with synthetic fibre;
• Absorbent items as sponges or kitchen rags are not suitable
for dishwashing.
Warning:Take care to buy dishwasher-proof sets in your
future purchases.
INSTALLING THE MACHINE
Positioning the machine
When determining the place to put your machine on, take
care to choose a place where you can easily load and unload
your dishes.
Do not put your machine in any location where there is the
probability for the room temperature to fall below 0°C.
Before positioning, take the machine out of its packaging by
following the warnings located on the package.
Page 10
9
Position the machine close to a water tap or drain. You
need to site your machine, taking into consideration that its
connections will not be altered once they are made.
Do not grip the machine by its door or panel in order to move
it.
Take care to leave a certain clearance from all sides of the
machine so that you can comfortably move it back and forth
during cleaning.
Make sure that the water inlet and outlet hoses do not get
squeezed while positioning the machine. Also, make sure
that the machine does not stand on the electrical cable.
Adjust the machine’s adjustable feet so that it can stand level
and balanced. Proper positioning of the machine ensures
problem-free opening and closing of its door.
If the door of your machine does not close properly, check if
the machine is stable on the floor it stands; if not, adjust the
adjustable feet and ensure its stable position.
Water connection
Be sure that the indoor plumbing is suitable for installing a
dishwasher. Also, we recommend that you fit a filter at the
entrance of your place or apartment so as to avoid any damage
to your machine because of any contamination (sand, clay,
rust etc.) that might be occasionally carried in through the
mains water supply or the indoor plumbing, and to forestall
such complaints as yellowing and formation of deposits after
washing.
Page 11
10
Water inlet hose
Do not use the water inlet hose of your
old machine,if any. Use the new water inlet
hose supplied with your machine instead.
If you are going to connect a new or long
- unused water inlet hose to your machine
,run water through it for a while before
making the connection. Connect the water
inlet hose directly to the water inlet tap.
The pressure supplied by the tap should
be at a minimum of 0.03 Mpa and and at a
maximum of 1 Mpa.If the water pressure is
above 1 Mpa,a pressure-relief valve should
be fitted inbetween.
After the connections are made, the tap should be turned on
fully and checked for water tightness.For the safety of your
machine, make sure to always turn off the water inlet tap after
each wash programme is finished.
NOTE: Aquastop water spout is used
in some models. In case of using
Aquastop, a dangerous tension exists.
Do not cut Aquastop water spout. Do
not let it get folded or twisted.
Page 12
11
Water outlet hose
The water drain hose can be connected
either directly to the water drain hole
or to the sink outlet spigot. Using a
special bent pipe (if available), the
water can be drained directly into the
sink via hooking the bent pipe over
the edge of the sink. This connection
should be at a minimum of 50 cm and
at a maximum of 110 cm from the floor
plane.
Warning: When a drain hose longer than 4 m is used, the
dishes might remain dirty. In that case, our company will not
accept responsibility.
Page 13
12
Electrical connection
The earthed plug of your machine should be connected to
an earthed outlet supplied by suitable voltage and current. If
there is no earthing installation, have a competent electrician
carry out an earthing installation. In case of usage without
earthing installed, our company will not be responsible for
any loss of usage that might occur.
The indoor fuse current value should be 10-16 A.
Your machine is set according to 220-240 V. If the mains
voltage in your location is 110 V, connect a transformer of
110/220 V and 3000 W inbetween. The machine should not
be plugged in during positioning.
Always use the coated plug supplied with your machine.
Running in low voltage will cause a decline in washing quality.
The machine’s electrical cable should be replaced by an
authorised service or an authorised electrician only. Failure
to do so may lead to accidents.
For safety purposes, always make sure to disconnect the
plug when a wash programme is finished.
In order not to cause an electric shock, do not unplug when
your hands are wet.
When disconnecting your machine from the mains supply,
always pull from the plug. Never pull the cord itself.
Page 14
Prior to using the machine for the first time
The importance of water decalcification
Filling with salt
• Check whether the electricity and supply water specifications match the values indicated
by the installation instructions for the machine.
• Remove all packaging materials inside the machine.
• Set the water softener.
• Add 2 kg salt into the salt compartment and fill with water up to a level at which it will
almost overflow.
• Fill the rinse aid compartment.
For a good washing function, the dishwasher needs soft, i.e. less calcareous water.
Otherwise, white lime residues will remain on the dishes and the interior equipment. This will
negatively affect your machine's washing, drying and shining performance. When water flows
through the softener system, the ions forming the hardness are removed from the water and
the water reaches the softness required to obtain the best washing result. Depending on the
level of hardness of the inflowing water, these ions that harden the water accumulate rapidly
inside the softener system. Therefore, the softener system has to be refreshed so that it
operates with the same performance also during the next wash. For this purpose, dishwasher
salt is used.
Use softener salt specifically
produced for use in dishwashers. To
put softener salt, first remove the
lower basket and then open the salt
compartment
cap by turning it
counter clockwise.1 2 At first fill the
compartment with 2kg salt and
water 3 at overflowing level If
if available use the funnel
will make filling easier. refit the cap
and close it.If the salt warning lamp
on the control panel becomes on fill
the salt compartment with salt again.
Fill the salt compartment with water
at first use only.
If you put a tablet into the salt
compartment, do not fill the
compartment completely.
We recommend that you use small-grained or powder softener salt.
Do not put table salt into your machine. Otherwise, the function of the softener compartment
may decrease over time. When you start your dishwasher, the salt compartment gets filled
with water. Therefore, put the softener salt prior to starting your machine.
This way, overflowing salt gets immediately cleaned up through the wash operation. If you are
not going to wash any dishes immediately after putting salt, then run a short washing program
with an empty machine in order to avoid any damage ( to prevent corrosion ) to your machine
due to the salt overflow while filling in the salt container.
PREPARING THE MACHINE FOR USE
13
ENGLISH
3
4
1 2
Page 15
14
Position the machine close to a water tap or drain. You
need to site your machine, taking into consideration that its
connections will not be altered once they are made.
Do not grip the machine by its door or panel in order to move
it.
Take care to leave a certain clearance from all sides of the
machine so that you can comfortably move it back and forth
during cleaning.
Make sure that the water inlet and outlet hoses do not get
squeezed while positioning the machine. Also, make sure
that the machine does not stand on the electrical cable.
Adjust the machine’s adjustable feet so that it can stand level
and balanced. Proper positioning of the machine ensures
problem-free opening and closing of its door.
If the door of you machine does not close properly, check if
the machine is stable on the floor it stands; if not, adjust the
adjustable feet and ensure its stable position.
Water connection
Be sure that the indoor plumbing is suitable for installing a
dishwasher. Also, we recommend that you fit a filter at the
entrance of your place or apartment so as to avoid any damage
to your machine because of any contamination (sand, clay,
rust etc.) that might be occasionally carried in through the
mains water supply or the indoor plumbing, and to forestall
such complaints as yellowing and formation of deposits after
washing.
Page 16
15
Adjust the water softener according to how hard your tap water is.
Press the program selector button and keep it pressed down. (3)
Meanwhile, energise the machine by pressing the Power On/Off button. (1)
Keep Start/Pause keys press until the leds “P1-P2-P3-P4-P5-end of program
indicator” are on and off. (3)
After the leds ” P1-P2-P3-P4-P5-end of program indicator ” have flashed (2) ,
release the program selector button . (3)
Your machine displays the latest entered water hardness setting.
You can adjust the levels by programme selector button (3) according to
Table of Water Hardness Level Settings.
After adjusting the water hardness level , press on/off button to save the
settings in memory. (1)
ENGLISH
1
2
3
Page 17
16
Detergent usage
Filling the detergent compartment
Combined detergent
Points to consider when using this type of products:
Use a detergent specifically designed for use in domestic dishwashers.
You can find powder,gel,and tablet detergents in the market that have been designed for
household dishwashers.
Detergent should be put into the compartment prior to starting the machine. Keep your
detergents in cool, dry places out of reach of your children.
Do not fill detergent into the detergent compartment more than required; otherwise it may
cause scratches on your glasses as well as lead to a poorly dissolved detergent.
Should you need more information concerning the detergent you will use, contact detergent
manufacturers directly.
Push the latch to open the detergent container as shown in
the image. 1 Detergent pod has level lines inside. It is
possible to measure the right detergent amount using these
lines. Detergent pod can take totally 40 cm3 detergent.
Open the dishwasher detergent and pour into the larger
compartment b 25 cm3 if your dishes are heavily soiled or
15 cm3 if they are
less soiled.2 If
your dishes have
been kept dirty for
a very long time, if
there are dried
food wastes on them, and if you have overly loaded
the dishwasher, pour a 5 cm3 detergent into the prewash compartment and start your machine.
You may have to add more detergent into your
machine, depending on the degree of soil and on the
water hardness level in your area.
Detergent manufacturers also produce combined detergents called “2 in 1”, “3 in 1” or “5 in 1”
etc.
“2 in 1” detergents contain detergent + salt or rinse aid. When using “2 in 1” detergents make
sure to check the specifications of the tablet.
Other tablet detergents contain detergent + rinse aid + salt + varlous extra functions.
Generally, combined detergents produce sufficient results under certain usage conditions only.
Such detergents contain rinse aid and/or salt in preset amounts
• Always make sure to check the specifications of the product you will use or whether or not
it is a combined product.
• Check if the detergent used is appropriate for the hardness of mains water that machine is
appertaining to.
• Observe the instructions on packagings when using such products.
• If such detergents are in the form of tablets, never put them into the interior section or the
cutlery basket of the dishwasher. Always put the tablets into the detergent compartment in
the detergent dispenser.
• They produce good results for certain types of usage only. If you are using this type of
detergents, you need to contact the manufacturers and find out about the suitable
conditions of use.
ENGLISH
Page 18
17
• When the conditions of use of such products and the machine settings are appropriate,
they ensure savings in salt and/or rinse aid consumption.
• Contact the detergent manufacturers if you are not obtaining good wash results (if your
dishes stay calcareous and wet) after having used 2 in 1 or 3 in 1 detergents. The scope of
warranty for your machine does not cover any complaints caused by the use of these types
of detergents.
: If you want to obtain better results while using combined detergents,
add salt and rinse aid into your machine and adjust the water hardness setting and the rinse
aid setting to the lowest position.
Solubility of the tablet detergents produced by different companies can vary
depending on the temperature and time. Therefore, it is not recommended to use such
detergents in short programs. It is more suitable to use powder detergents in such
programs.
Should any problem, which you have not encountered before, arise with the use of
this type of detergents, contact the detergent manufacturers directly.
• Fill the salt and rinse aid compartments.
• Adjust the water hardness setting to the highest position(6)andrunanempty-wash.
• Adjust the water hardness level.
• Make the suitable rinse aid setting.
Rinse aid is used to prevent the stay of white water drops, lime
stains, white film strip-shaped stains that may form on the
dishes, as well as to increase the drying performance. Contrary
to the popular beliefs, it is used not only for obtaining shinier
dishes but also for obtaining sufficiently dried dishes. For this
reason, care should be taken that there is adequate amount of
rinse aid in the rinse aid compartment and only polishing material
produced for use at dishwashers should be used.
If the rinse aid lamp on the control panel becomes on fill the rinse
aid compartment with rinse.
To put rinse aid, remove the rinse aid
compartment cap by turning it.1 Fill
the rinse aid compartment with rinse
aid until the rinse aid level indicator
becomes dark; 2 refit the cap and
close it by turning it in a way that the
nails will correspond to one another.
By checking the rinse aid level
indicator on the detergent dispenser,
you can understand whether or not
your machine needs rinse aid. A dark
indicator b means that there is rinse aid in the compartment,
while a light indicator a shows that you need to fill the compartment with rinse aid.
The rinse aid level adjuster can be set to a position between 1 and 6. Factory setting for rinse
aid is the position 3. You need to increase the degree of the adjuster if water stains form on
your dishes after a wash, whereas you need to decrease the degree if a blue stain is left when
wiped by hand. 3
Use only those rinse aid materials which are allowed for use in the machine. As
rinse aid residues left as a result of overflowing will create extremely high amounts of foam
and thus reduce the washing performance, remove the excess amount of rinse aid by wiping it
with a rag
Recommended usage
Warning:
When you give up using combined detergents
Filling with rinse aid and making the setting
Warning:
ENGLISH
Page 19
If you properly place your dishes into the machine, you will be using it in the best way in terms
of energy consumption, washing and drying performance.
There are two separate baskets for you to load your dishes into your machine. You can load into
the lower basket such round and deep items as pots with long handles, pot lids, plates, salad
plates, cutlery sets.
The upper basket has been designed for tea plates, dessert plates, salad bowls, cups and
glasses. When placing long-stem glasses and goblets, lean them against the basket edge, rack
or glass supporter wire and not against other items. Do not lean long glasses against one
another or they cannot remain steady and may receive damage.
It is more appropriate to locate the thin narrow parts into the middle sections of baskets.
You can place spoons among the other cutlery sets in order to prevent them from sticking to
one another. You are recommended to use the cutlery grid in order to obtain the best result.
To avoid any possible injuries, always place such long-handle and sharp-pointed dishes as
serving fork, bread knife etc. with their sharp points facing down or horizontally on the baskets.
Warning: Place your dishes into your machine in a way that they will not prevent the upper and
lower spray arms from spinning.
LOADI
N
G YOUR D
I
SHWASHER
18
Top basket
Height Adjustable Rack
These racks are designed to increase the capacity of the
top basket. You can place your glasses and cups on the
racks. You can adjust the height of these racks. Thanks to
this feature, you can place different sizes of glasses under
these racks.
Thanks to height adjustment plastics mounted on the
basket, you can use your racks in 2 different heights. In
addition, you can place long forks, knives and spoons on
these racks laterally, so that they do not block the
revolution of propeller.
2
1
Foldable racks on the upper basket are designed
in order to let you place big items easier such as
pots, pans, etc. If requested, each part can be
folded separately, or all of them can be folded
and larger spaces can be obtained. You can use
foldable racks by raising them upwards,or by folding
down.
Page 20
Top basket height adjustment
Top basket of your machine is in upper position. When it is in this position, you can place big
items such as pans, etc. on lower basket. When you take top basket to lower position, you can
place and wash big sized plates on the top basket.
Use wheels in order to change the basket height. Open the basket retaining parts at the end of
top basket rails by turning them to the sides, and take the basket out. Change the position of the
wheels; reinstall the basket to the rail, and close basket retainer parts. In this way, you take the
top basket to lower position
Lower Basket
Folding Racks
Folding racks consisting of four parts that are located on the lower basket of your machine are
designed in order to let you place big items easier such as pots, pans, etc. If requested, each
part can be folded separately, or all of them can be folded and larger spaces can be obtained.
You can use folding racks by raising them upwards, or by folding.
a
b
c
d
1
2
19
Page 21
20
Multi-functional Rack System
Multi-functional rack system is located in the bottom basket of your machine. You can easily
wash spare glasses or dishes like long ladles, bread knife with the help of this accesory.
Please fold the racks by putting them from a position to b position,
in order to put the racks in the multi-functional rack system into the
closed position. Please make sure that claws on the rack are fit on
the cord c. You can put the rack into the open position by following
the steps in a reverse manner.
Your racks in the multi-purpose rack system has two positions: low
position d and upper position e. This way you can attain larger
space at the bottom part of your machine. Please put your racks
into e position from d position to e , in order to put your racks to
the upper position. Please fix the racks to their places f on the
cord. Please make sure that the prop does not contact the dishes
you put on the racks.
Page 22
Alternative basket loads
Lower Basket
Top basket
21
Page 23
Faulty loads
22
Important Note for Test Laboratories
For detailed information on performance tests, please contact following address:
"dishwasher@standardtest.info” . In your email, please provide the model name and
serial number (20 digits) which you can find on the appliance door.
Page 24
23
Programe
duration (min)
110
50
160 30 15
Programme No
Intensive 70°C
P1()
Programme
names and temp.
Type of food
waste
soups, sauces,
pasta, eggs, pilaf,
potato and oven
dishes, fried
food
Level of soil high
Detergent amount
B: 25 cm3 / 15
cm3 A: 5 cm
A+B
Prewash
70°C Wash
Electricity consum
(kW hours)
.
1,55
1,35
1,00 0,90
0,02
Water consump
(liters)
.
16,5
12,7 12,0
12,4
4,5
Warning: Short programs do not include a drying step.
The values declared above are the values obtained under laboratory conditions according
to relevant standards. These values can change depending on conditions of product’s use
and environment (network tension, water pressure, water input temperature and environment
temperature).
Cold Rinse
Hot Rinse
Dry
End
Super 65
(2)°CP
soups, sauces,
pasta, eggs, pilaf,
potato and oven
dishes, fried
food
medium
A+B
65°C Wash
Cold Rinse
Hot Rinse
End
Eco 50
(3)CP
°
coffee, milk, tea,
cold meats, potato
and oven dishes,
fried food
medium
A+B
Prewash
50°C Wash
Hot Rinse
Dry
End
Reference
Quick 40
(4)CP
°
coffe, milk, tea,
cold meats,
vegetables, not
kept for long
small
B
Cold Rinse
Hot Rinse
40°C Wash
End
Prewash
No Heat ( 5)P
Pre-wash to rinse
and loosen residue
awaiting full loadthen select a
programme
-
-
End
Prewash
ENGLISH
PROGRAMME DESCRIPTION
Programme items
Page 25
1.) Power On/Off Button
.
2.) Programme selection button
3.) Delay Timer Buton
Note 1
4.) Salt Lack Warning indicator
Rinse aid Lack Warning indicator
End of Program Indicator
When the Power On/Off button is pressed, end of program indicator starts lighting
With the programme select ion button, you can select a suitable program for your
dishes.
Thanks to the delay feature of your machine, you can delay the start time of the
program for 3-6-9 hours by pressing Delay button.
When you pres delay button, 3h led comes on. If you continue pressing Delay
Buton , 6h-9h leds will come on respectively on each press. when you select
delay time and the desired program,after closing the door the program with delay
will be activate If you want you can firstly choose the programme and then delay
time, this is also possible. If you want to change or cancel the delay time, you can
adjust by pressing Delay timer button.
When you delay a program, you can check the remaining time through display.
For example; when you select 9h delay time, 9h delay led comes on. When
remaining time is down to 6h, then 6h led comes on. In this way, you can follow
up the remaining time.
(only models with extra features): If you have used an extra feature on the
latest washing program, this feature will remain active also on the next washing
program. If you do not want to use this feature on the newly selected washing
program, press the selected feature button again, and check that the lamp on the
button goes off.
In order to see whether softening salt in your machine is sufficient or not, check
salt lack warning light on the display.When salt lack warning light starts coming
on, you need to fill in the salt chamber.
In order to check that there is sufficient rinse aid in your machine check rinse aid
lack warning light on the display.When rinse aid lack warning light starts coming
on , fill in rinse aid chamber.
End of program indicator on the control panel turns on when the selected washing
program is completed .Your machine also gives a buzzer sound for “5 times”
when the program is completed.
24
GETTING FAMILIAR WITH YOUR MACHINE
1 2 3 4
Page 26
25
ENGLISH
SWITCHING ON THE MACHINE AND SELECTING A PROGRAMME
Switching on the machine
Program follow-up
Changing a programme
1. Press the Power On/Off key.
2. Select the program suiting your dishes via the Program Selection button.
3. Close door.The programme starts automatically.
If you decide not to start to machine after selecting the program , just press the on/off
button.Your machine will become ready for the new program selection when you press on/off
button again.You can select the new program by pressing the program selection button.
If you would like to change programs while a washing program is continuing.
When the door of the machine is opened in order to stop the washing program before it
is completed, first open the door slightly in order to avoid water spillage.
Note:
Note:
Once the power on/off key is
pressed, the end of program
indicator turns on.
When you select a program with the program
selection button, the light of the selected
program turns on and the end of program
indicator turns off.
Open the door and select a new
program by pressing the program
selection button.
After closing the door,
the new program started
will resume the course
of the old program.
End of program indicator on the control panel
turns on when the selected washing program is
completed .Your machine also gives a buzzer
sound for “5 times” when the program is completed.
Do not open the door
before the program ends.
2.
Page 27
26
ENGLISH
Changing a programme with resetting
Switching the machine off
Note:
Note:
If you would like to cancel a program while a washing program is resumed
When the door of the machine is opened in order to stop the washing program before it
is completed, first open the door slightly in order to avoid water spillage.
After the buzzer sound indicates the end of the program when the washing
program comes to an end (end indicator light is on), you can leave the door of your machine
ajar in order to hasten the drying.
If the machine door opens during washing or the power is cut off, the machine will go on
to the program in case the door is shut or the power is back.
Note:
.
Pull the plug out of the outlet.
Turn off the water tap.
Note: If energy is cut or machine door is opened during drying process, program is terminated.
Your machine becomes ready for new program selection.
When end of program indicator turns on,
switch your machine off by using the
Power On/Off button.
Discharge process starts after closing
the door of the machine.The machine
discharges the water in it for about 30
seconds.When the program is cancelled,
your machine gives a buzzer sound for
“5 times “ and the “end of program
indicator” turns on.
Keep the program selection button
pressed for 3 seconds. (End of program
indicator flashes and program light
turns off)
Open the door of your machine.
Light of the last selected program
will turn on.
Page 28
27
ENGLISH
MAINTENANCE AND CLEANING
Cleaning the machine in regular intervals prolongs the machine's service life.
Oil and lime may accumulate in the machine's washing section. In case of such
accumulation;
Cleaning the seals in the machine door,
Cleaning the machine,
Filters
-Fill the detergent compartment without loading any dishes into the machine, select a
programme that runs at high temperature, and start the machine. In case of insufficiency, use
special cleansing material available in the market. (Cleansing material produced special to
machines by detergent producers.)
-To clean any accumulated residues in the door seals, wipe the seals regularly by using a
dampened cloth.
Clean the filters and spray arms at least once a week.
Unplug your machine and turn off its tap before starting the cleaning.
Do not use hard materials when cleaning your machine. Wipe with a fine cleaning material
and a dampened cloth.
Check if any food wastes have remained on the coarse and fine
filters.
If any food wastes are left, remove the filters and clean them
thoroughly under the water tap.
a. Micro Filter
b. Coarse Filter
c. Metal/Plastic Filter
To remove and clean the filter combination, turn it counter
clockwise and take it out by lifting upwards.1
Pull and remove the metal/plastic
filter. 3 Then pull the coarse filter out
of the micro filter.2 Rinse it with lots of
water under the tap. Refit the
metal/plastic filter. Insert the coarse
filter into the micro filter in a way that
the marks will correspond to one
another. Attach micro filter into the
metal/plastic filter and turn to the
direction of arrow and it is locked
when the arrow on micro filter can be
seen from across. 4
• Never use your dishwasher without any filter.
• Incorrect fitting of the filter will reduce the washing effectiveness.
• Clean filters are very important in terms of the proper running of the machine.
Page 29
Spray arms
Hose filter
Check whether or not the holes for the
upper and lower spray arms are clogged. If
there is any clogging, remove the spray
arms and clean them under water.
You can remove the lower spray arm by
pulling it upwards, while the upper spray
arm nut can be removed by turning the nut
to the left.
Be sure that the nut is perfectly tightened
when refitting the upper spray arm.
Water is prevented by the inlet hose filter so as to avoid any damage to your machine because
of any contamination (sand, clay, rust etc.) that might be occasionally carried in through the
mains water supply or the indoor plumbing, and to forestall such complaints as yellowing and
formation of deposits after washing. Check the filter and the hose from time to time and clean
them if necessary. To clean the filter, first turn off your tap and then remove the hose. After
removing the filter from the hose, clean it under the tap. Insert the cleaned filter back into its
place inside the hose. Refit the hose.
28
Page 30
Intensive
)1P(
repuS
)2P(
ocE
)3P(
Quick
)4P(
hsawerP
)5P(
EDOCRORRE
NOITPIRCSEDRORRE
LORTNOC
ylppusretawetauqedanI
dnanepoyllatotsipattupniretawehterusekaM•
.tucretawonsierehttaht
esohtupniretawehtetarapes,patretawehtesolC•
noitcennocehttaretlifehtnaelcdnapatehtmorf
.esohehtfodne
ehtfiecivresehttcatnoc,enihcamruoytratseR•
semuserrorre
patehtesolC•tupniretawsuounitnocfororrE
enihcamehtniretawetsawehT
.degrahcsidebtonnac
.deggolcsiesohegrahcsidrettaW•
deggolcebthgimenihcamruoyfosretlifehT•
ehtetavitcadnaenihcamruoyno-fforewoP•
.dnammocnoitallecnacmargorp
,seunitnocrorreehtnI•
rorreretaeH
retawtsniagaevitcasimralA
wolfrevo
patehteslocdnaenihcamruoyfforewoP•
draccinortceleytluaF
erutarepmet(rorregnitaehrevO
)hgihootsienihcamehtni
rosnesretaehytluaF
t GRAM service.catnoC•
29
t GRAM service.catnoC•
t GRAM service.catnoC•
t GRAM service.c
atnoC
t GRAM service.
c
a
t
n
o
C
t GRAM service.
c
a
t
n
o
C
t GRAM service.
c
a
t
n
o
C
Page 31
30
ENGLISH
If the programme won't start
If detergent residues are left in the detergent compartment
If water is left inside the machine at the end of the programme
If the machine stops during a wash operation
If shaking and hitting noises are heard during a wash operation
If there are partial food wastes left on the dishes
If there are whitish stains on the dishes
If the dishes won't dry up
If there are rust stains on the dishes
• Check if the plug is connected.
• Check your indoor fuses.
• Be sure that the water inlet tap is turned on.
• Be sure that you have closed the machine door.
• Be sure that you switched off the machine by pressing the Power On / Off button.
• Be sure that the water inlet filter and the machine filters are not clogged.
• Detergent has been added when the detergent compartment was wet.
• The water drain hose is clogged or twisted.
• The filters are clogged.
• The programme is not finished yet.
• Power failure.
• Water inlet failure.
• Program can be on standby mode.
• Dishes placed incorrectly.
• Spray arm hitting the dishes.
• Dishes placed incorrectly into the machine, sprayed water did not reach related places.
• Basket overly loaded.
• Dishes leaning against one another.
• Very small amount of detergent added.
• An unsuitable, rather weak wash programme selected.
• Spray arm clogged with food wastes.
• Filters clogged.
• Filters incorrectly fitted.
• Water drain pump clogged.
• A very small amount of detergent is being used.
• Rinse aid dosage setting at a very low level.
• No special salt is being used despite the high degree of water hardness.
• Water softener system setting is at a very low level.
• Salt compartment cap not closed well.
• A programme without a dry operation selected.
• Rinse aid dosage set too low
• Dishes unloaded too fast.
• Stainless-steel quality of the dishes washed is insufficient.
• High rate of salt in the wash water.
• Salt compartment cap not closed well.
• Too much salt spilt into the sides and into the machine while filling it with salt.
• Unhealthy mains grounding.
Page 32
31
ENGLISH
Door is not opened / closed properly;
•
•
.
1. Whenever you will not be operating your machine
• Unplug the machine and then turn the water off.
• Leave the door slightly ajar in order to prevent the formation of unpleasant smells.
• Keep the machine interior clean.
2. Eliminating water droplets
• Wash the dishes with the intensive programme.
• Take all of the metal containers in the machine out.
• Do not add detergent.
3. If you properly place your dishes into the machine, you will be using it in the best way in
terms of energy consumption, washing and drying performance.
4. Clean all rough waste before you place dirty dishes to the machine.
5. Operate the machine after it is completely full.
6. Use pre-washing program only when necessary.
7. Observe program information and average consumption values table when selecting a
program.
8. Since the machine will reach high temperatures, it should not be mounted near refrigerator.
Not proper weight wooden part inserted on the door. ( Follow the weight given in the
Assembly manuel )
The tensile of the door spring not adjusted properly. Adjust it according to the Assembly
manuel
Call an authorised service if the problem still persists after the controls or in case of
any malfunction not described above.
PRACTICAL AND USEFUL INFORMATION
9.Iftheapplianceislocatedinaplacewheretheriskoffreezingexists,youmustcompletely
drain the water that has remained in the machine. Turn off the water tap, disconnect the
waterinlethosefromthetapandallowtheinteriorwatertodrain.
Page 33
52158178 R20
Gram Norge AS
Postboks 833
NO-1670 Kråkerøy
Tel.: 22 07 26 30
www.gram.no
Gram Sverige AB
Smultronbacken 4A
SE- 135 62 Tyresö
Tel.: 040 38 08 40
www.gram.se
Gram Finland OY
PL 4640
FI-00002 Helsinki
Tel.: 020 7756 350
www.gram.fi
Gram A/S . Gejlhavegård 2B . DK-6000 Kolding . +45 73 20 10 00 . www.gram.dk
THEPRODUCTFICHE(Spect)
Supplier'strademark
Supplier'smodel
Capacityofdishwasher 12
Theenergyefficiencyclass A+
AnnualenergyconsumptioninkWhperyear(AEC)(280Cycle)*
285
Energyconsumption(Et)(kWhpercycle) 1,00
Offmodepowerconsumption(W)(Po) 0,05
Leftonmodepowerconsumption(W)(Pl) 1,00
Annualwaterconsumptioninlitresperyear(AWC)(280Cycle)**
3360
Dryingefficiencyclass*** A
Standardprogrammename****
Eco50˚C
Programmetimeforstandardcycle(min) 160
NoisedB(A) 47
Built–in Yes
*Energyconsumption285kwhperyear,basedon280standardcleaningcyclesusingcoldwaterfillandtheconsumption
oflowpowermodes.Actualenergyconsumptionwilldependonhowtheapplianceisused.
**Waterconsumption3360litersperyearbasedon280standardcleaningcycles.Actualwaterconsumptionwilldepend
onhowapplianceisused.
***DryingefficiencyclassAonascalefromG(leastefficient)toA(mostefficient).
****The“Eco50˚C”isthestandardcleaningcycletowhichtheinformationinthelabelandtheficherelates.This
programmeissuitabletocleannormallysoiledtablewareanditisthemostefficientprogrammeintermsofcombined
energyandwaterconsumption.
DSI 6411-60
GRAM
Loading...