Graco Husky 515 User Manual

Husky 515 Plastic Pumps

FLUID OUTLET PRESSURE psi (bar, MPa)

AIR CONSUMPTION scfm (m

/min)

Husky 515 Performance

Air-Operated Double Diaphragm

Technical Specifications

Husky 515 Plastic Pumps Acetal Polypropylene PVDF

Maximum fluid working pressure 100 psi (7 bar, 0.7 MPa) 100 psi (7 bar, 0.7 MPa) 100 psi (7 bar, 0.7 MPa)
Maximum free flow delivery* 15 gpm (57 lpm) 15 gpm (57 lpm) 15 gpm (57 lpm)
Maximum pump speed 400 cpm 400 cpm 400 cpm
Displacement per cycle** 0.04 gallon (0.15 liter) 0.04 gallon (0.15 liter) 0.04 gallon (0.15 liter)

Popular Models

Maximum suction lift *** 15 ft (4.5 m) dry 15 ft (4.5 m) dry 15 ft (4.5 m) dry
Maximum size pumpable solids 0.09 in (2.5 mm) 0.09 in (2.5 mm) 0.09 in (2.5 mm)
Maximum ambient operating temperature† 180°F (82°C) 150°F (66°C) 180°F (82°C)
Maximum diaphragm operating temperature† Refer to page 5 Refer to page 5 Refer to page 5
Typical sound level at 70 psi

(4.9 bar, 0.49 MPa) air @ 125 cpm
Maximum air consumption 28 scfm (0.672 m3/min) 28 scfm (0.672 m3/min) 28 scfm (0.672 m3/min)
Air pressure operating range 30 to 100 psi

Air inlet size 1/4 npt(f) 1/4 npt(f) 1/4 npt(f)
Air exhaust port size 3/8 npt(f) 3/8 npt(f) 3/8 npt(f)
Fluid inlet & outlet size**** 1/2 npt(f) or bspt(f) 1/2 npt(f) or bspt(f) 1/2 npt(f) or bspt(f)
Weight 7.8 lb (3.5 kg) 6.5 lb (2.9 kg) 8.5 lb (3.9 kg)
Wetted parts

(in addition to ball, seat and diaphragm materials–
which may vary by pump)

Instruction manual 308981 308981 308981

* Flow rates are with muffler and do not vary based on diaphragm material.
** Displacement per cycle may vary based on suction condition, discharge head, air pressure and fluid type
*** Duckbill suction lift 11 ft (3.3 m)
**** Hybrid thread allows for either 1/4 npt or 1/4 bspt fitting
† Actual pump performance may be affected by prolonged usage at temperature.

74 dBa 74 dBa 74 dBa

(2.1 to 7 bar, 0.21 to 0.7 MPa)

30 to 100 psi
(2.1 to 7 bar, 0.21 to 0.7 MPa)

30 to 100 psi
(2.1 to 7 bar, 0.21 to 0.7 MPa)

Groundable Acetal, PTFE, SST Polypropylene, PTFE, SST PVDF, PTFE

Performance Charts

16

(60.56)

30

(0.84)

24

(0.67)

18

(0.50)

12

(0.37)

6

(0.17)

3

100

(7, 0.7)

80

(5.5, 0.55)

60

(4.1, 0.41)

40

(2.8, 0.28)

20

(1.4, 0.14)

0

gpm

(lpm)

A

B

C

0

AIR PRESSURE LEGEND

A

B

C

D

4

(15.2)

(Pump tested in water with inlet submerged

= at 100 psi (7 bar, 0.7 MPa) Air Consumption

= at 70 psi (4.8 bar, 0.48 MPa) Fluid Pressure

= at 40 psi (2.8 bar, 0.28 MPa)

= at 20 psi (1.4 bar, 0.14 MPa)

C

D

D

FLUID FLOW

(30)

A

B

8

12

(45.42)

updated 2/15

PROCESS EQUIPMENT CATALOG

PROCESS EQUIPMENT CATALOG