Graco CSP EZ Instructions Manual
Instructions
WARNING
CSP EZ Greaser
SINGLE AXLE WITH INNER AND OUTER S-CAMS
3A8038B
AND CLEVIS PINS 6-8 POINT #25T391
For use as a centralized lubrication system on heavy trucks. For professional use only.
Important Safety Instructions
Read all warnings and instructions in this
manual and in the pump manual before
using the equipment. Save all instructions.
PERSONAL PROTECTIVE EQUIPMENT
Wear appropriate protective equipment
when in the work area to help prevent
serious injury, including eye injury, hearing
loss, inhalation of toxic fumes, and burns.
EN
Typical Layout
Outlet
No.
1
Clevis Pin Orange Single Tube
3
S-Cam Blue
5
Slack Adjuster Orange Elbow (P/N 556638)
7
S-Cam Black Elbow (P/N 556638)
Description Tube Color Bundle & Marking Endpoint Fitting
(P/N 563789)
3-Tube Bundle
(P/N 563783)
Elbow (P/N 556638)
Elbow (P/N 556638)
Outlet
No.
2
Clevis Pin Orange Single Tube
4
S-Cam Blue
6
Slack Adjuster Orange Elbow (P/N 556638)
8
S-Cam Black Elbow (P/N 556638)
For drum brakes with enclosed S-cams, the tubes and fittings attached to outlets 7 and 8 may be removed and
replaced with doubling plugs. This causes the grease from those outlets to combine with the outlets below them and
feed into the slack adjusters instead.
Description Tube Color Bundle & Marking Endpoint Fitting
Elbow (P/N 556638)
(P/N 563789)
3-Tube Bundle
(P/N 563783)
Elbow (P/N 556638)
Outlet Fitting Removal
Use a 7/16 in. wrench (or an adjustable wrench) to remove the tubing nut from where the tube is attached to the
fitting(s) and detach the tube. Use a 1/2 in. (13 mm) wrench to remove the outlet fitting from the CSP valve, making
sure that the clamping ring (cone-shaped metal gasket) is removed with the fitting.
Doubling Plug Installation
NOTICE
Never install a doubling plug into outlet 1 or outlet 2. Plugging one or both of these outlets will cause the valve to
stall, and it will not function again until the plugs are removed from these outlets.
Use a 3/16 in (5 mm) hex key or Allen wrench to install the doubling plug by tightening the plug until snug, then torque
the plug to 10- 12 ft-lb (14 - 16 N•m).
California Proposition 65
CALIFORNIA RESIDENTS
WARNING: Cancer and reproductive harm – www.P65warnings.ca.gov.
Graco Information
For the latest information about Graco products, visit www.graco.com.
For patent information, see www.graco.com/patents.
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.
Phone: 612-623-6928 or Toll Free: 1-800-533-9655, Fax: 612-378-3590
All written and visual data contained in this document reflects the latest product information available at the time of publication.
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2020, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
Graco reserves the right to make changes at any time without notice.
Original instructions. This manual contains English. MM 3A8038
International Offices: Belgium, China, Japan, Korea
Graco Headquarters: Minneapolis
www.graco.com
Revision
B, November 2020
Loading...