Graco 3A2993B User Manual
Instructions
a
b
c
GLC 2200 Wiring
3A2993B
Harness Kit
Used to interface the GLC 2200 Lubrication Controller to pump and pump accessories. For
professional use only.
Not approved for use in European explosive atmosphere locations.
EN
Kit Nos.: 24P314
Kit is rated IP65.
Important Safety Instructions
Read all warnings and instructions in this
manual and the GLC2200 Lubrication Controller
instruction manual included with your unit. Save
these instructions.
Instructions
1. Verify the Connector end of the cable is NOT
plugged in to the GLC2200 controller.
2. Remove 2 to 3 inches of the outer insulation (a) from
bare end of the cable as shown F
.
IG. 1.
4. Using the Wiring Key Table provided on the reverse
side of these instructions, connect components to
cable wires matching each wire color shown on the
Table to the related component.
Verify all negative and positive wire colors are correctly assigned.
5. Plug connector into the GLC2200 unit matching pin
numbers to Connector Identification Label (shown
on the reverse side of these instructions).
NOTE: The connector can only be plugged into the
GLC2200 one way. The clip (c) should be facing
down when the connector is correctly oriented.
FIG. 3
FIG. 1
3. Strip each wire (b) as shown in FIG. 2.
FIG. 2
Wiring Diagram
1 2 3 4 5
6 7 8 9 10
M
9A Fuse
+
-
V
9A 2A
P/C
+9V
+30V
M = Motor, pump power or solenoid
V = Electric vent valve for injector-based systems
Wiring Key Connector Identification Label
PIN12345
PIN678910
Pin Color Description
1 Blue Pump
2PurpleAlarm
3 Brown Low Level
4 White Pressure Cycle Switch
5 Black Voltage Input
6OrangePump
7GreenAlarm
8 Yellow Low Level
9 Gray Pressure Cycle Switch
10 Red Voltage Input
+/-
-
-
-
-
+
+
+
+
+
All written and visual data contained in this document reflects the latest product information available at the time of publication.
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2012, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
Graco reserves the right to make changes at any time without notice.
For patent information, see www.graco.com/patents.
Original instructions. This manual contains English. MM 3A2993
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
www.graco.com
December 2013
Loading...