Instructions/Parts
®
ProMix
2KE
3A1325C
Stand Kits
Portable stands for ProMix 2KE Electronic Proportioners. For professional use only.
Part No. 24F301
For Pump-Based Systems
Part No. 24G611
For Meter-Based Systems
Important Safety Instructions
Read all warnings and instructions in
your separate ProMix 2KE manuals.
Save these instructions.
24G611 Stand Kit shown
installed on ProMix 2KE
Meter-Based System
(not included)
EN
24F301 Stand Kit shown
installed on ProMix 2KE
Pump-Based System
(not included)
TI16571a
TI16570a
24F301 Stand Kit, for Pump-Based Systems
24F301 Stand Kit, for Pump-Based Systems
24F301 Kit Parts
Ref. Description Qty.
801 TUBE, cart 2
802 PLUG, tube 4
803 CASTER, cart 2
804 CASTER, swivel, with brake 2
805 NUT, hex 8
806 WASHER, lock 8
807 WASHER 16
808 SCREW, cap, hex hd‘ 8
809 PLUG, button 4
810 NUT 4
811 WASHER 4
F
NOTE: Stand parts are not sold separately.
Install the Cart
1. See FIG. 1. Assemble the two sides of the cart as
shown. The swivel casters with brake (804) must be
installed at the rear of the cart.
2. Insert each side of the cart into the ProMix 2KE
frame (F). Secure with the screws (808), washers
(807), lockwashers (806), and nuts (805).
Dimensions
Ref. in. (mm)
A 72.56 (1843)
B 25.76 (655)
C 21.75 (553)
D 27.00 (686)
A
801
808
807
807
806
805
809
810
811
804
802
803
TI16568a
B
D
C
TI16571a
2 3A1325C
FIG. 1. 24F301 Stand Kit, for Pump-Based Systems
24G611 Stand Kit, for Meter-Based Systems
24G611 Stand Kit, for Meter-Based Systems
24G611 Kit Parts
Ref. Description Qty.
801 TUBE, cart 2
802 PLUG, tube 4
803 CASTER, cart 2
804 CASTER, swivel, with brake 2
805 NUT, hex 8
806 WASHER, lock 8
807 WASHER 16
808 SCREW, cap, hex hd‘ 8
809 PLUG, button 4
810 NUT 4
811 WASHER 4
812 ADAPTER, meter stand 1
NOTE: Stand parts are not sold separately.
Install the Cart
1. See FIG. 2. Assemble the two sides of the cart as
shown. The swivel casters with brake (804) must be
installed at the rear of the cart.
2. Install the meter stand adapter (812) on the two
sides of the cart and secure with the screws (808),
washers (807), lockwashers (806), and nuts (805).
812
801
807808
806
805
806
807
F
807
T
807
808
805
3. Install the cart onto the ProMix 2KE frame (F) with
the tabs (T) on the outside of the frame posts.
Secure with the screws (808), washers (807), lockwashers (806), and nuts (805).
Dimensions
Ref. in. (mm)
A 70.42 (1789)
C 21.75 (553)
D 27.00 (686)
A
C
D
TI16570a
809
810
811
804
802
803
FIG. 2. 24G611 Stand Kit, for Meter-Based Systems
TI16569a
NOTICE
The kit is not designed to be shipped when assembled
to a system. Damage will occur.
3A1325C 3
Graco Standard Warranty
Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in
material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty
published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by
Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written
recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty
installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of
non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with
structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or
maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of
the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned
to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs
will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy
(including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or
consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT
MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to
the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these
warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or
the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the
negligence of Graco, or otherwise.
FOR GRACO CANADA CUSTOMERS
The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into,
given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissen
rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés, à la suite
de ou en rapport, directement ou indirectement, avec les procédures concernées.
t avoir convenu que la
Graco Information
For the latest information about Graco products, visit www.graco.com.
For patent information, see www.graco.com/patents.
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.
Phone: 612-623-6921 or Toll Free: 1-800-328-0211 Fax: 612-378-3505
All written and visual data contained in this document reflects the latest product information available at the time of publication.
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS, MN 55440-1441 • USA
Copyright 2010, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
Graco reserves the right to make changes at any time without notice.
Original instructions.
This manual contains English. MM 3A1325
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
www.graco.com
Revised April 2014
Loading...