Graco 3A1309B User Manual
Instructions
ti16518a
ti109493c
Paint Gun Stencil Kit for Line Striping
System
Model 24G778, Series A
3300 psi (22.7 MPa, 227 bar) Maximum Working Pressure
Important Safety Instructions
For complete warnings and safety instructions see RoadLazer™
RoadPak
Pressure Relief Procedure
The system pressure must be manually relieved to prevent the system from starting or spraying accidentally.
Fluid under high pressure can be injected through the
skin and cause serious injury. To reduce the risk of an
injury from injection, splashing fluid, or moving parts,
follow the Pressure Relief Procedure in manual
3A1214 whenever you:
• are instructed to relieve the pressure
• stop spraying
• check or service any of the system equipment
• install or clean the spray tip
™
Line Striper System manual. Save these instructions.
3A1309B
EN
Works in conjuction with hand bead gun kit
P/N 238957
1
3
4
5
6
7
8
2
ti16519a
RoadPak Gun Stencil Kit Installation
1. Perform Pressure Relief Procedure before install-
ing (see manual 3A1214).
Parts List
Ref. Part Description Qty.
1 248157 FLEX GUN 1
2 249080 HOSE, coupled 1/4 x 50 ft 1
3 166969 GASKET 1
4 180137 NUT, gun 1
5 223718 TUBE, extension, 15.83 in. 1
6 180136 ADAPTER, tip 1
7 243161 GUARD, RAC 5 1
8 286425 SWITCH TIP, size 425 1
11 101566 NUT, lock 8
12 108851 WASHER, plain 8
13 16G776 BRACKET, hose wrap 4
14 516595 BOLT, hex, 3/4 in. 8
15 196177 NIPPLE, reducer 1
16 124490 FITTING, tee 1
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
For patent information, see www.graco.com/patents.
Original instructions. This manual contains English. MM 3A1309
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441
Copyright 2010, Graco Inc. is registered to ISO 9001
2 3A1309B
www.graco.com
Revised Fenruary 2013
Loading...