Graco 3A1161A User Manual

Installation - Parts

3A1161A

Foot Switch Kit

For use with SmartWare™ Shot Dispense kits. Enables the operator to trigger the dispense valve using a foot pedal. For professional use only.

Not for use in explosive atmospheres.

Part 262530

Important Safety Instructions

Read all warnings and instructions in this manual and the SmartWare Shot Dispense Kit Instructions-Parts manual. Save all instructions.

ENG

Parts

Ref. Description Qty.

1 GUARD, foot switch 1 2SWITCH, foot 1 3 CABLE, assy. 1

r_262530_3A1161_machine_side

Installation

Operation

1. Remove electronics subassembly cover from the supply system or pump system.

2. Connect the cable (3) from the foot switch assembly to the number 2 side (start/stop) of the Y-adpater. The Y-adapter is connected to connection 5 on the breakout module.

Connection 5

See the SmartWare Shot Dispense Kit Instructions-Parts manual for operation instructions.

3. Reinstall the electronics subassembly cover.

All written and visual data contained in this document reflects the latest product information available at the time of publication.

Graco reserves the right to make changes at any time without notice.

Original instructions. This manual contains English. MM 3A1161

Graco Headquarters: Minneapolis

International Offices: Belgium, China, Japan, Korea

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441

www.graco.com