It’s happened before: A critical piece of equipment meets an unfortunate end due to the failure of one, tiny component.
That’s why Graco doesn’t build just any off-the-shelf part into its equipment. We select and manufacture high quality
components our customers have come to rely on. Our equipment is superior because its parts are superior –
in design, quality and performance.
Designed, tested and built for reliability
Great design is in the details. At Graco, our engineering team designs and specifies every part that is built into our machines.
We test and re-test our parts to make sure they provide you with outstanding performance, long life and durability.
You can’t afford your equipment to fail in the field. As the trusted brand you rely on, neither can we.
Each quality part is dependent on another
Graco equipment is designed as a unified system, not as a collection of stand-alone parts. Every part is designed
with a careful eye toward the parts it will interact with, and adjusted accordingly. When any of a system’s parts is
replaced with a lower quality, non-Graco part, the result may be a ripple effect that degrades not only its own
functionality, but that of other parts throughout the system.
Protect your business with genuine Graco parts
When you need replacement parts, you could purchase cheaper alternatives. But why risk it? Off-the-shelf parts
may hinder performance and possibly even damage your Graco equipment. You invest in Graco equipment
because it is superior quality. It’s what your business depends on. So protect your investment and your future.
Trust only genuine Graco parts.
3
While they are lightweight and comfortable to use, Graco’s XTR
+
™
guns can handle the toughest coatings and perform
in the most extreme spray conditions. All our airless spray guns are made with pride and built to exacting standards
in our Sioux Falls, South Dakota, U.S.A. manufacturing facility.
XTR5+ and XTR7+ Guns - Lightweight and Ergonomic
XTR5+: Maximum working pressure of 5000 psi (345 bar, 34.5 MPa)
XTR7+: Maximum working pressure of 7250 psi (500 bar, 50.0 MPa)
Self-locking Needle Assembly
• Faster rebuilds
• Minimal tools required
• Factory set needle needs no adjustment
Variety of Handle and Trigger Options
• 2 and 4-finger trigger available
• Oval-insulated or round handle
• Lightweight trigger pull
XHD™ Reverse-A-Clean (RAC)®
SwitchTip
• Exceptional life, pattern and finish
• Great for high solids coatings
• Maximum working pressure of 7250 psi
(500 bar, 50.0 MPa)
Trigger Guard
• Easily detaches for access to filter
• Acts as a wrench to remove
filter from gun handle
• Small profiles spray in tight areas
™
Easy Out™ Gun Filter
• Reduces tip plugs
• Eliminates collapsed filters
• Provides more filtration area
EasyGlide™ Swivel
• Allows easier gun movement
under high pressure
4
XTR5+ Airless Spray Guns
Maximum working pressure: 5000 psi (345 bar, 34.5 MPa)
at high pressures up to 7250 psi (500 bar), while still optimizing the specified spray pattern. All spray tips are manufactured
in Sioux Falls, South Dakota, U.S.A. and individually tested before leaving the facility.
Gun Tips and Guards
XHD RAC SwitchTip™ and Guard
• SwitchTip – Minimize downtime by changing tip sizes in seconds without removing tip guard and housing
• Save time by not having to use a screwdriver to remove the tip
• Locking tab ensures tip stays securely in guard
• High quality carbide lasts longer
• Designed to easily clear clogs
8
Water @ 2000 psi (138 bar, 13.8 MPa) - paints with a higher viscosity will decrease the flow rate.
Tips and Guards Ordering Information
Graco XHD Guards
XHD001 7/8 in aluminum thread, compatible with Graco XTR+ and XHF guns
XHD003 7/8 in stainless steel thread, hand-tightened, compatible with Graco XTR+ and XHF guns
XHD005 11/16 in aluminum thread, adaptable with non-Graco guns
Use only XHD seals with Graco Guards, XHD010
XHD Tips
Complete your XHD tip part number using the numbers in the charts below. For example: for a tip with .025 orifice and 10 in (254 mm) pattern, order XHD525
ORIFICE SIZE - INCHES
IN (MM).007.009.011.013.015.017.019.021.023.025.027.029.031.033.035.037.039.041.043.045.047.049.051.053.055.057.059.061.063.065.067.069.071.075.081