Graco 313290A User Manual

Instructions-Parts

15V950 Floor Stand

Floor stand for use with ProMix® 2KS Wall Mount Fluid Stations

Important Safety Instructions

Read all warnings and instructions in your ProMix
2KS installation, operation, and repair manuals.
Save these instructions.

Parts

Ref Description Qty.

1FRAME 1
2LEG 2
3GUSSET 4
4 SCREW, cap, hex-hd; 3/8-16 x 3 in. (76 mm) 12
5 NUT, hex; 3/8-16 12
6 WASHER; 3/8 24
7 WASHER, lock; no. 10 12
8 PLUG, tube, square 8
9 PLUG, tube 4
10 SCREW, machine, hex washer hd; 1/4-20 x 3

in. (76 mm)
11 NUT, hex; 1/4-20 4
12 WASHER; 1/4 8
13 WASHER, lock; 1/4 4

4

(4, 5, 6, 7)

B

(10, 11,

12, 13)

A

313290A

C

8

1

9

3

5

7

6

8

F

IG. 1: Floor Stand

6

2

4

TI12790a

Assembly

1. Assemble legs (2) and gussets (3) to frame (1)
using 3/8-16 screws (4), washers (6, 7), and nuts (5)
as shown. See F

2. Secure stand to the floor, using 1/2 in. bolts (not pro­vided) that are long enough to prevent the stand
from tipping. See F

IG. 1.

IG. 2.

3. See F

IG. 1. Attach fluid station panel in lower holes

(A), using the remaining 3/8-16 screws (4), washers
(6, 7), and nuts (5).

4. See F

IG. 1. Use the 1/4-20 screws (10), washers

(12, 13), and nuts (11) to attach the EasyKey

™

in

the upper holes (B) at the front of the stand.

NOTE: To attach a color change module, use the 1/4-20
tapped holes (C) at the back of the stand (mounting
hardware not provided).

21 in. (533 mm)

18 in. (457 mm)

1/2 in. (13 mm) diameter

F

IG. 2: Floor Stand Mounting Diagram

All written and visual data contained in this document reflects the latest product information available at the time of publication.

mounting holes

Graco reserves the right to make changes at any time without notice.

International Offices: Belgium, China, Japan, Korea

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441

Copyright 2009, Graco Inc. is registered to ISO 9001

TI14042a

This manual contains English. MM 313290

Graco Headquarters: Minneapolis

www.graco.com