Page 1
Instructions - Parts List
Oil Pump System
Important Safety Instructions
Read all warnings and instructions in this manual. Save these instructions.
See supplied pump and motor manuals for important Safety and Warnings information and installation,
operation and service instructions for those components.
See page 2 for model information, including maximum working pressure.
312862F
EN
Models 247888, 247889,
24D602 and 24D603 Shown
ti11724
Page 2
Models
Models
Sub
System
Part No.
247888 24D590 3.5:1,
247889 24D591 4.5:1,
247890 24D592 6:1,
247891 24D593 12:1,
247983 12:1
247892 24D594 6:1,
247893
247894 24D595 10:1,
247895 23:1,
24D602 24J092 3.5:1,
24D603 24J091 4.5:1,
24D604 24D598 6:1,
24D605 24D599 12:1,
24D606 24J093 6:1,
24D607 24J093 6:1,
24D608 24D601 10:1,
Level
Part
No.
24D594 6:1,
Pump
High-Flo
High-Flo
Dura-Flo
Dura-Flo
Dura-Flo
, SST
High-Flo
High-Flo
Dura-Flo
Dura-Flo
High-Flo
High-Flo
Dura-Flo
Dura-Flo
High-Flo
High-Flo
Dura-Flo
System Maximum Working
Packages With DataTrak
Air
Motor
Size
NXT340
0
NXT34001500 cc 3A2024 3A2023 100 (0.7, 7.0) 450 (3.1, 31)
NXT34001000 cc 311833 311717 100 (0.7, 7.0) 620 (4.3, 43)
NXT340
0
NXT340
0
NXT65002000 cc 3A2024 3A2023 75 (0.5, 5.2) 500 (3.4, 34)
NXT65002000 cc 3A2024 3A2023 218742
NXT65001000 cc 311833 311717
NXT650
0
Packages Without DataTrak
NXT340
0
NXT34001500 cc 3A2024 3A2023 100 (0.7, 7.0) 450 (3.1, 31)
NXT34001000 cc 311833 311717 100 (0.7, 7.0) 620 (4.3, 43)
NXT340
0
NXT65002000 cc 3A2024 3A2023 75 (0.5, 5.2) 500 (3.4, 34)
NXT65002000 cc 3A2024 3A2023 218742
NXT65001000 cc 311833 311717 255143
Lower
Size
2000 cc 3A2024 3A2023
580 cc 311826 311825 100 (0.7, 7.0) 1190 (8.2, 82)
580 cc 311826 311825 100 (0.7, 7.0) 1190 (8.2, 82)
580 cc 311826 311825 75 (0.5, 5.2) 1725 (11.9,
2000 cc 3A2024 3A2023
580 cc 311826 311825 100 (0.7, 7.0) 1190 (8.2, 82)
Pump
Manual
Pump
Lower
Manual
Floor or
Wall
Mount
255143
Wall
Floor
255143
Wall
255143
Wall
Floor
Wall
psi (MPa,
100 (0.7, 7.0) 350 (.4, 24)
75 (0.5, 5.2)
100 (0.7, 7.0) 1180 (8.1, 81)
100 (0.7, 7.0) 350 (.4, 24)
100 (0.7, 7.0) 500 (3.4, 34)
100 (0.7, 7.0) 1180 (8.1, 81)
Pressure
Air Fluid
psi (MPa,
bar)
500 (3.4, 34)
bar)
119)
2 312862F
Page 3
Setup and Parts
Models: 247888, 247889, 24D602, 24D603 - Wall Mount
2
6
10†
1
Setup and Parts
5
9
4
Ref.
No. Part No. Description Qty.
1 102806 FITTING, union, adapter 90° 1
2 110048 HOSE, air, coupled, 48 inch 1
3 115042 HOSE, fluid, coupled, 6 foot 1
4 157785 FITTING, air, swivel 1
5 244524 WIRE, ground, assembly, with
clamp
6 255143 KIT, bracket, wall mounting 1
7 512152 VALVE, ball, 1” NPT(F) 1
8 24D590 PUMP, LR 4-ball, 3400/2000
(model 247888)
24D591 PUMP, LR 4-ball, 3400/1500
(model 247889)
24J091 PUMP, MR4-ball, 3400/1500
(model 24D603)
8
3
Ref.
No. Part No. Description Qty.
24J092 PUMP, MR4-ball, 3400/2000
(model 24D602)
9 NXT011 CONTROL, air integrated, locking 1
10† 247887 CE Identification label 1
1
† Attention: To comply with CE directives, the CE
identification label must be affixed to the wall
bracket as shown. Permanently mark the date of
1
1
1
assembly on the label.
7
ti11724
1
312862F 3
Page 4
Setup and Parts
Models: 247890, 247894 - Wall Mount
2
6
10†
11, 1
8
Ref.
No. Part No. Description Qty.
1 102806 FITTING, union, adapter 90° 1
2 110048 HOSE, air, coupled, 48 inch 1
3 115042 HOSE, fluid, coupled, 6 foot, 1
4 157785 FITTING, air, swivel 1
5 244524 WIRE, ground, assembly, with
clamp
6 255143 KIT, bracket, wall mounting 1
7 512152 VALVE, ball, 1” NPT(F) 1
8 24D592 PUMP, Dura-Flo, 3400/1000
(model 247890)
24D595 PUMP, Dura-Flo, 6500/1000
(model 247894)
9 NXT011 CONTROL, air integrated, locking 1
10† CE Identification label 1
11 C19668 FITTING, bushing, reducing 1
5
9
4
7
3
ti115726
1
1
1
† Attention: To comply with CE directives, the CE
identification label must be affixed to the wall
bracket as shown. Permanently mark the date of
assembly on the label.
4 312862F
Page 5
Models: 247891, 247983, 247895 - Wall Mount
Setup and Parts
2
10†
6
11, 1
8
Ref.
No. Part No. Description Qty.
1 160022 FITTING, union, adapter, straight 1
2 110048 HOSE, air, coupled, 48 inch 1
3 115042 HOSE, fluid, coupled, 6 foot 1
4 157785 FITTING, air, swivel 1
5 244524 WIRE, ground, assembly, with
clamp
6 255143 KIT, bracket, wall mounting 1
7 512152 VALVE, ball, 1” NPT(F) 1
8 24D593 PUMP, Dura-Flo, 3400/580
(model 247891)
P12MSA PUMP, Dura-Flo, 3400/580
(model 247983)
P23MCD PUMP, Dura-Flo, 6500/580
(model 247895)
9 NXT011 CONTROL, air integrated, locking
(models 247891and 247983)
NXT031 CONTROL, air integrated locking
(model 247895)
10† CE Identification label 1
11 116650 COUPLING, 1 inch x 1-1/2 inch,
(model 247891)
5
9
4
3
7
ti11725
1
1
1
1
1
1
1
† Attention: To comply with CE directives, the CE
identification label must be affixed to the wall
bracket as shown. Permanently mark the date of
assembly on the label.
312862F 5
Page 6
Setup and Parts
Model: 247892, 24D606 - Wall Mount
6
10†
2
5
9
4
1
8
Ref.
No. Part No. Description Qty.
1 121476 FITTING, swivel, 90°, 2 inch 1
2 110048 HOSE, air, coupled, 48 inch 1
3 247969 HOSE, fluid, coupled, 6 foot 1
4 157785 FITTING, air, swivel 1
5 244524 WIRE, ground, assembly, with
clamp
6 255143 KIT, bracket, wall mounting 1
7 512213 VALVE, ball, 2” NPT(F) 1
8 JC60M1 PUMP, LR, 4-ball, 6500/2000
(model 247892)
24J093 PUMP, LR-4 ball, 6500/2000
(model 24D606)
9 NXT031 CONTROL, air integrated, locking 1
10† 247887 CE Identification label 1
3
7
ti11727
1
1
1
† Attention: To comply with CE directives, the CE
identification label must be affixed to the wall
bracket as shown. Permanently mark the date of
assembly on the label.
6 312862F
Page 7
Model: 247893, 24D607 - Floor Mount
Setup and Parts
2
5
9
4
8
1
Ref.
No. Part No. Description Qty.
1 121476 FITTING, swivel, 90°, 2 inch 1
2 110048 HOSE, air, coupled, 48 inch 1
3 247969 HOSE, fluid, coupled, 6 foot 1
4 157785 FITTING, air, swivel 1
5 244524 WIRE, ground, assembly, with
clamp
6 218742 KIT, stand mounting 1
7 512213 VALVE, ball, 2” NPT(F) 1
8 JC60M1 PUMP, LR 4-ball, 6500/2000
(model 247893)
24J093 PUMP, LR-4 ball, 6400/2000
(24D607)
9 NXT031 CONTROL, air integrated, locking 1
10† CE Identification label 1
3
7
6
10†
ti11728
1
1
† Attention: To comply with CE directives, the CE
identification label must be affixed to the floor
stand as shown. Permanently mark the date of
assembly on the label.
312862F 7
Page 8
Graco Standard Warranty
Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in
material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty
published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by
Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written
recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty
installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of
non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with
structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or
maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of
the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned
to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will
be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy
(including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or
consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT
MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to
the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these
warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or
the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the
negligence of Graco, or otherwise.
FOR GRACO CANADA CUSTOMERS
The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into,
given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la
rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés, à la suite
de ou en rapport, directement ou indirectement, avec les procédures concernées.
Graco Information
For the latest information about Graco products, visit www.graco.com.
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.
Phone: 612-623-6928 or Toll Free: 1-800-533-9655, Fax: 612-378-3590
All written and visual data contained in this document reflects the latest product information available at the time of publication.
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2008, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
Graco reserves the right to make changes at any time without notice.
For patent information, see www.graco.com/patents.
Original instructions. This manual contains English. MM 312862
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
www.graco.com
Revised August 2012
Loading...