Graco Inc 309362, 245116, 3309362, 245113, 245117 User Manual
...
OPERATION
309362
Rev. E
U.S. Patent Pending
Zinc Sprayer
List of Models, page 2
For Maximum Working Pressure see page 2
Related manuals
309340. . . . . . .
309092, 308438. . . . . . .
.. 307049
. . 309342
INSTRUCTIONS
IMPORTANT WARNINGS AND
INFORMATION.
Read and keep for reference.
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
ECOPYRIGHT 2001, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001
HD = Heavy Duty Cart
LW = Light Weight Cart
List of Models
Part
No.
244463 A
245113 A
Series Ratio /
Pump
33:1
Bulldog
24:1
Bulldog
Pump No. Gun Hose HD LW Maximum Fluid
Working Pressure
245117 X X X
245116 X X X
20.7 MPa
(207 bar) (3000 psi)
23.4 MPa
(234 bar) (3400 psi)
Maximum Air
Input Pressure
.7 MPa
(7.0 bar) (100 psi)
.7 MPa
(7.0 bar) (100 psi)
2 309362
Symbols
When you see a symbol in the manual, for example
refer to the WARNINGS on pages 3–4.
WARNING
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and result in serious
INSTRUCTIONS
injury.
D Read all instruction manuals, tags, and labels before operating the equipment.
D Do not exceed the maximum working pressure of the lowest rated system component. See page 2 for maxi-
mum working pressure of each package.
D Do not alter or modify equipment.
D Do not use hoses to pull equipment.
D Wear hearing protection when operating this equipment.
D Moving parts can pinch or amputate your fingers.
D Follow all local, state, and national fire, electrical, and safety regulations.
WARNING
PRESSURIZED FLUID AND INJECTION HAZARD
Spray from the gun, hose leaks, or ruptured components can splash fluid in the eyes or on the skin and cause
serious injury. High pressure spray or leaks can inject fluid into the body.
D Follow Pressure Relief Procedure on page 10 when you stop spraying or begin servicing sprayer.
D Fluid injected into the skin might look like a cut, but is a serious injury. Get immediate medical attention.
D Do not put your hand or fingers over the spray tip, or point gun at anyone or any part of body. Do not stop or
deflect leaks with your hand, body, glove, or rag.
D Check the hoses, tubes, and couplings daily. Tighten all fluid connections before each use.
D Know the specific hazards of the fluid you are using. Read the fluid manufacturer’s warnings.
D Wear appropriate protective clothing, gloves, eyewear, and respirator.
D Always have the tip guard and the trigger guard on the gun when spraying.
D Check hoses and couplings daily. Replace worn or damaged parts immediately. Do not repair high pressure
couplings; you must replace entire hose.
3309362
Symbols
WARNING
FIRE AND EXPLOSION HAZARD
Solvent and paint fumes can ignite or explode. To help prevent a fire and explosion:
D Ground the equipment and the object being sprayed. See Grounding on page 7.
D Use in extremely well ventilated area.
D Hold gun firmly to side of grounded pail when triggering into pail.
D Use only electrically conductive paint hose.
D If there is any static sparking while using the equipment, stop spraying immediately. Identify and correct the
problem.
D Eliminate all ignition sources such as pilot lights, cigarettes, and static arcs from plastic drop cloths. Do not plug
in or unplug power cords or turn lights on or off in the spray area.
D To reduce the risk of static arcing which could result in a fire or explosion and serious injury, use only non–
sparking tools.
4 309362
5309362
Loosen nut
1
Adjust Air
2
3
Tighten nut
Pump Air Regulator
Overview
ON
OFF
Air Supply Valve
(Must be Bleed Type)
Grounding Wire
6 309362
Return System
Grounding
Use only electrically conductive hoses.
1.
2.
Connect ground wire clamp to a true earth ground.
Ground object being sprayed, fluid supply containers,
solvent pails, waste pails, and all other equipment in spray
area. Use only metal pails. Do not place on non-conductive
surface such as paper, cardboard, or plastic.
TI1102
PAINT
TINTA
PEINTURE
INTURA
TI1102
7309362
Setup
Complete before using the equipment for the
first time.
1.
Tools Required:
1. Two adjustable wrenches
2. Non–sparking hammer or plastic mallet
3. Torque wrench
4. Grounding wires and clamps for pails
5. Two 5 gallon metal pails
1.
Ground sprayer. See page 7.
2. 3. 4.
5.
2.
Check packing nut. Fill with Throat Seal Liquid
(TSL).Torque to 25–30 ft–lb (34–41 NS m).
8 309362
Loading...