Graco 309353B User Manual

Page 1
INSTRUCTIONS--PARTS LIST
309353B
KEEP FOR REFERENCE.
See pump and motor manuals (supplied) for important safety warnings and instal-
INSTRUCTIONS
lation, operation, and service instructions.
AIR--OPERATED DOUBLE DIAPHRAGM
Bulk Transfer Packages
Model No. 244679, 1050 AODD Dual Inlet
120 psi (0.8 MPa, 8.3 bar) Maximum Air Working Pressure 120 psi (0.8 MPa, 8.3 bar) Maximum Fluid Working Pressure
Model No. 244680, 1050 AODD Single Inlet
120 psi (0.8 MPa, 8.3 bar) Maximum Air Working Pressure 120 psi (0.8 MPa, 8.3 bar) Maximum Fluid Working Pressure
Model No. 244681, 515 AODD Dual Inlet
100 psi (0.7 MPa, 7 bar) Maximum Air Working Pressure 100 psi (0.7 MPa, 7 bar) Maximum Fluid Working Pressure
Model No. 244682, 716 AODD Single Inlet
100 psi (0.7 MPa, 7 bar) Maximum Air Working Pressure 100 psi (0.7 MPa, 7 bar) Maximum Fluid Working Pressure
EN
First choice when
quality counts.t
BULK
WATER
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440--1441
ECOPYRIGHT 2001, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001
BULK ANTI--FREEZE / WINDSHIELD WASH
TI1376A
Page 2
Installation
4
11
5
2
1
15
1
9
14
10
1
3
BULK WATER
13
12
12
13
6
7
8
BULK ANTI--FREEZE / WINDSHIELD WASH
NOTE: See pump manuals (supplied) for impor-
tant safety warnings and installation, operation, and service instructions.
For Model 244681, install Thermal Relief Kit
1
(9) and bushing (15) at center fluid outlet port of pump.
2 309353
TI1376A
Page 3
Parts List
Model No. 244679, 1050 AODD Dual Inlet
(includes items 1-- 14)
Model No. 244680, 1050 AODD Single Inlet
(includes items 1-- 6, 8--14)
Ref. No. Part No. Description Qty.
1 236265 PUMP, Husky 1050 AODD 1
(used on models 244679 and 244680; see manual 308326)
243669 PUMP, Husky 515 AODD 1
(used on model 244681; see manual 309204)
241906 PUMP, Husky 716 AODD 1
(used on model 244682; see manual 308573)
2 244844 REGULATOR, air; 1/2” npt(fbe); 1
includes gauge (used on models 244679 and 244680; see manual
308167)
1 10147 REGULATOR, air; 1/4” npt(fbe); 1
includes gauge (used on models 244681 and 244682; see manual
308167)
3 1 15042 HOSE, fluid; 1” ID; 1” npt(mbe) x 1
6 ft (used on models 244679 and
244680)
109105 HOSE, fluid; 3/4” ID; 3/4” npt(mbe) 1
x 6 ft (used on models 244681 and
244682)
4 205418 HOSE, air; 1/2” ID; 1/2” npt(mbe) 1
x 6 ft (used on models 244679 and
244680)
109125 HOSE, air; 1/4” ID; 1/4” npt(mbe) 1
x 6 ft (used on models 244681 and
244682)
5 1 10225 VALVE, air shutoff; 1/2” npt(fbe) 1
(used on models 244679 and
244680)
1 10223 VALVE, air shutoff; 1/4” npt(fbe) 1
(used on models 244681 and
244682)
6 189233 BRACKET , wall mounting 1
(used on models 244679 and
244680)
224835 BRACKET , wall mounting 1
(used on models 244681 and
244682)
Model No. 244681, 515 AODD Dual Inlet
(includes items 1-- 6, 8--11, 13--15)
Model No. 244682, 716 AODD Single Inlet
(includes items 1-- 6, 8--11, 13--14)
Ref. No. Part No. Description Qty.
7 685984 MANIFOLD, dual inlet (used on 1
model 244679) 8* 236054 KIT, suction (see manual 308335) 1 9 238428 KIT, thermal relief (see form 1
406172)
10 156684 ADAPTER, swivel, straight; 1/2” 1
npt(m) x 1/2” npsm(f) (used on
models 244679 and 244680)
156823 ADAPTER, swivel, straight; 1/4” 1
npt(m) x 1/4” npsm(f) (used on
models 244681 and 244682) 1 1 158491 NIPPLE; 1/2” npt (used on 1
models 244679 and 244680)
156971 NIPPLE; 1/4” npt (used on 1
models 244681 and 244682) 12{ 158555 NIPPLE; 1” npt x 3/4” npt 1
(used on models 244679 and
244680)
13} 156589 ADAPTER, swivel, 90_; 3/4” npt(f) 1
x 3/4” npsm(f) (used on models
244679 and 244680)
160327 ADAPTER, swivel, 90_;3/4” 1
npt(m) x 3/4” npsm(f) (used on
models 244680 and 244681) 14 160022 ADAPTER, swivel, straight; 1” 1
npt(m) x 1” npsm(f) (used on
models 244679 and 244680)
157785 ADAPTER, swivel, straight; 3/4” 1
npt(m) x 3/4” npsm(f) (used on
models 244681 and 244682) 15 100081 BUSHING; 1/2” npt(m) x 3/8” npt(f) 1
(used on model 244681)
* Two Suction Kits 236054 are supplied with models
244679 and 244681.
{ Two Nipples 158555 are supplied with model
244679.
} Two Adapters 156589 are supplied with model
244679, and two Adapters 160327 are supplied with model 244681.
309353 3
Page 4
Graco Standard Warranty
Graco warrants allequipment manufactured byGraco andbearing its name to be free from defects inmaterialand workmanship onthe date ofsale by an authorized Graco distributor to the original purchaserfor use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair orreplace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accor­dance with Graco’s written recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction,damage or wear caused by faultyinstallation, misapplication, abrasion, corrosion,inadequate or improper maintenance, negligence, accident,tampering,or sub­stitution of non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipmentwill be returnedto theoriginal purchaser transportationprepaid. If inspection ofthe equipmentdoes not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’ssole obligationand buyer’s sole remedy for any breach of warranty shallbe as set forth above.The buyer agrees that no other remedy (including, but not limited to,incidental or consequentialdamages forlost profits, lost sales, injury toperson or property, orany other incidental or consequential loss) shall be available. Any action forbreach of warranty mustbe brought within two(2) years of the date of sale.
Graco makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose in connection with accessories,equipment, materials or components sold but not manufactured by Graco. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or otherwise.
FOR GRACO CANADA CUST
The parties acknowledge that they have required thatthe present document, as wellas all documents, noticesand legal proceedings entered into, given or instituted pursuanthereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnais­sent avoirconvenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés à la suite de ou en rapport, directement ou indirectement, avec les procedures concernées.
OMERS
Graco Information
For the latest information about Graco products, visit www.graco.com
For patent information, see www.graco.com/patents
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest Distributor.
PHONE: 612--623--6928 or Toll Free: 1--800--533-- 9655; FAX: 612--378--3590
All written and visual data contained in this document reflect the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Original instructions. This manual contains English. MM309353
International Offices: Belgium, China, Japan, Korea
Grago Headquarters: Minneapolis
GRACO INC. AND SUBSIDIARIES P.O. BOX 1441 MINNEAPOLIS, MN 55440--1441 USA
Copyright 2001, Graco Inc. All Graco Manufacturing locations are registered to ISO9001
www.graco.com
December 2014
4 309353
Loading...