Graco 308394B User Manual
INSTRUCTIONS- PARTS LIST
K
KEEP FOR REFERENCE
Pump Mounting
Bracket
Used to mount Dyna-Star or Power-Star pumps to a wall
Important Safety Instructions
Read all warnings and instructions in this
manual and your pump manual. Save all
instructions.
Model 236778
Includes hardware to mount to a stubby-size 1/4:1 ratio
Dyna-Star
™
Pump or a 1:1 Power-Star Pump™ to a wall.
308394B
EN
Model 203987
Includes hardware to mount to a stubby-size 1:1
Dyna-Star, 1:1 Fast-Ball, 10:1 President, 3:1 Eagle, or
5:1 ration Fire-Ball Pump to a wall.
Installation
Mounting the Pump Bracket (FIG. 1)
1. When determining where to mount the bracket, consider
the following things:
a. Location of the permanent supply lines from the
pump to the outlet
b. Type of connections required
c. Ease in moving drums
d. Stress caused on the wall by the weight of the pump,
pumping operation, hoses, and fluid
2. See FIG. 2. Refer to the following table for nominal screw
size to mount the pump bracket. Use screw and lock
washer of the appropriate type and length for your installation
.
Model Screw Size, in. (mm)
236778 1/2 (12)
203987 3/8 (10)
Dimensions
Model X in. (mm) Y in. (mm) Z in. (mm)
236778 6-1/4 (159) 6-1/4 (159) 9/16 (14)
203987 4-1/8 (105) 5-1/8 (130) 7/16 (11)
x
Y
z
FIG. 1
.
Mounting the Pump (FIG. 2.)
1. Remove the screws (2), lock washers (1) and pump
support strap (4).
2. Mount the pump in the pump mounting support (3)
and position approximately 1 in. (25 mm) down the
pump cylinder as showing in F
IG. 2.
3. Reinstall the pump support strap, lock washers and
screws.
Parts
3
5
4
SIDE VIEW of Pump
and Bracket
FIG. 2
Pump Mounting Bracket 236778
Ref
No. Part No. Description Qty.
1 100133 WASHER, lock; 3/8” 4
2 102637 SCREW, cap; 3/8- 16 x 1-1/2” 4
3 189713 SUPPORT, pump mounting 1
4 189721 STRAP, pump support 1
5 189836 PAD, pump mounting 1
Pump Mounting Bracket 203987
Ref
No. Part No. Description Qty.
1 100214 WASHER, lock; 5/16” 2
1
2
2 100450 SCREW, cap; 5/16-18 x 1” 2
3 160846 SUPPORT, pump mounting 1
4 160847 STRAP, pump support 1
5 168716 PAD, pump mounting 1
Graco Information
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.
Phone: 612-623-6921 or Toll Free: 1-800-328-0211 Fax: 612-378-3505
FOR TECHNICAL ASSISTANCE, service repair information or answer about the application of Graco equipment: 1-800-543-0339
Toll Fre e
All written and visual data contained in this document reflects the latest product information available at the time of publication.
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 1994, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
Graco reserves the right to make changes at any time without notice.
For patent information, see www.graco.com/patents.
Original instructions. This manual contains English. MM 308394
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
www.graco.com
Revised August 2012
Loading...