Graco 225376, 225378, 225380, 225384 Instruction Manual
INSTRUCTIONS-PARTS LIST
306436L
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
MODEL 204867
Hand Pump Assembly
HAND-OPERATED, 120-LB SIZE
Gear Lube Dispensers
175 psi (1.2 MPa, 1 2 bar) Maximum Working Pressure
Model Mounting Cover Meter
225376,
Series B
225378,
Series A
225380,
Series A
225384,
Series B
Portable Base Cover inline,
electronic
Portable Base Cover None
None Cover None
Portable Truck Cover inline,
electronic
First choice when
quality counts.t
Model 225384
06789A
HAND-OPERATED, 16-GALLON SIZE
Automatic Transmission
Fluid Dispenser
175 psi (1.2 MPa, 1 2 bar) Maximum Working Pressure
Model Mounting Cover Meter
225880,
Series B
Portable Base Cover inline,
electronic
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440--1441
http://www.graco.com
ECOPYRIGHT 1993, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001
Model 225880
06790A
Table of Contents
Installation 3..........................................................................................
Operation 4..........................................................................................
Dimensions Chart 4...................................................................................
Service 6............................................................................................
Parts
Hand Pump Assembly, Model 204867 7................................................................
Gear Lube Dispensers, Models 225378, 225376, 225380 8...............................................
Gear Lube Dispenser, Model 225384 9................................................................
Automatic Transmission Fluid Dispenser, Model 225880 10...............................................
Truck Assembly, Model 203650 10....................................................................
Portable Base Assembly, Model 203622 1 1.............................................................
Hose and Meter Assemblies, Models 239707, 239705 1 1.................................................
Warranty 12.........................................................................................
Graco Phone Number 12...............................................................................
2 306436
Installation
See Fig.1 or Fig. 2, depending on your model.
Models with a Portable Truck
Insert the truck handle (708) into the sockets in the
truck base (701).
All Models
Place a full container of fluid on the base. Carefully
clean the container top before opening it to avoid fluid
contamination. Secure the drum or shield (401) with
the hardware provided.
Models with a Drum Cover
Install the drum cover (601) on the opened drum and
secure it with the thumbscrews (603).
All Models
Slide the pump extension tube (318) all the way down
on the riser tube (314). Insert the riser tube into the
opening in the top of the shield (401) or cover (601).
Lower the pump until the outlet housing (319) rests on
the shield or cover and secure it with the four screws
(309). Install the pump lever (316), clevis (311), and
hose and meter assembly (2 or 5).
601
603
314
318
101
Fig. 1
319
309
104
31 1
102
316
5
502
06782A
To prime the pump, open the nozzle (502) and operate
the pump until fluid flows from the nozzle. Close the
nozzle and place it in the opening in the outlet housing
(319).
708
707
706
701
06783
Fig. 2
3306436
CAUTION
Operation
Reset the meter to zero by pressing the RESET
button.
To avoid contamination when changing drums, do
not let the pump’s intake valve touch the floor or any
dirty surface.
Dimension Chart
Model No. Height
in. (mm)
225376 37 (940) 19 (483) 36 (16)
225378 37 (940) 19 (483) 34 (15)
225380 35 (889) 16 (406) 18 (8)
225384 39 (991) 24 (610) 49 (22)
225880 37 (940) 19 (483) 35 (16)
Insert the nozzle in the fill hole. Open the nozzle and
operate the pump. When finished, close the nozzle
and wipe off any excess fluid. Place the nozzle in the
opening in the outlet housing.
If the meter fails to register, it may be due to a low
battery. See the Service section in instruction manual
308687.
Models with Non-Drip Nozzle 200--348
The non-drip nozzle can be set in the automatic position by turning it two or more turns counterclockwise.
Width
inch (mm)
Weight
lb (kg)
4 306436
Loading...