Grace Digital GDI EXSJ400 User Manual

Sol Jam
Models: GDI-EXSJ400 / 401
User Guide
Quick Start
1
Open Cap on the back of your Sol Jam
2
Turn on the Main Power Switch
3
Press the Standby Button to power on your Sol Jam
Search your Bluetooth
4
Connection on your Smart Device
5
Pair & Play
LED Status Indicators
Power, Battery, Bluetooth
Control Buttons
LIMITED MANUFACTURER’S WARRANTY:
The Sol Jam is covered by a 3 year limited warranty that covers defects in workmanship and / or materials for a period of 3 years from original purchase date. This warranty does not apply to any products which have been abused, neglected, modified, or used for a purpose other than the one for which they were manufactured. Please refer to the above care and maintenance instructions for suggested care details. The warranty is valid only for the original owner who purchases the unit from an authorized dealer. Transfers do not qualify for warranty protection. Grace Digital reserves the right to replace any out-of-stock or discontinued product with a comparable product. Discontinued products may not be available for warranty replacement. Any contents are NOT covered by the limited manufacturer’s warranty. Warranty terms may be revised without notification at the discretion of the manufacturer. Please visit www.ecoxgear.com for additional product & warranty information.
a division of Grace Digital Inc., San Diego, California.
Sol Jam by ECOXGEAR,
Designed in California. Made in China.
Patent Pending.
Control Buttons & Operations
On/Off
Press the Standby Power Button once to power ON/OFF.
IMPORTANT: Standby Power function will NOT operate when the Master Power is set OFF. Master Power Switch under the cap on the back panel must be set ON for Standby & your Sol Jam to operate.
Bluetooth
When turned ON, the Sol Jam will power on and search for your Bluetooth. Refer to “Set Up Recommendations 1-2-3”
3
part for details.
Speaker Volume
Press to decrease or to increase Speaker Volume.
NOTE: Some Bluetooth devices may require to be manually set for maximum audio level.
Your Sol Jam will beep to indicate when maximum volume setting is reached.
Track Selection
Press button once to select Previous Song track & Next Song track .
Play/Pause/Answer
Press button once to pause & play song tracks and to answer mobile calls (MUST be paired with Bluetooth).
Battery Level
Press the button to check the battery level. There are five LED battery level indicators located on the top of the unit. Each LED represents 20% of a charge. Five full LEDs indicate a full charge.
Battery Indicator
When connected with a USB cable to a power source, the LED indicates a USB connection and charging status.
RED: charge in process GREEN: full charge complete
3) Dry unit completely before opening the cap. Do NOT open the cap if wet or in a wet environment.
4) Do NOT apply excessive force to any surfaces of the unit when wet or in a wet environment.
5) Do NOT use or store the unit in places with high temperature.
6) AVOID prolonged exposure to strong magnetic fields.
7) Periodically check the rubber seal for premature wear.
8) Periodically clean the rubber with a soft moist cloth and ensure no objects such as dirt, hair, or sand are on the rubber seal ring. Do NOT use any oily solvent or chemicals for cleaning.
9) Rinse off the unit with tap water after use in salt water or swimming pool.
10) Power and / or charge the built-in rechargeable battery for portable use by connecting the USB cord to a computer USB connection or to an AC outlet using the AC-to-USB cord 5V, 1A power adapter intended for use with the unit.
11) Noise and audio distortion may occur when the batteries are nearing end of charge.
12) Do NOT remove the built-in battery. Do NOT remove the grill covers.
You should never
1) Never charge your ECOXGEAR if you suspect water has entered the device. Charging a device with water inside could be potentially hazardous and cause fire or a spark.
2) Never use your ECOXGEAR if you have dropped it or thrown it against a hard surface which may have destroyed the integrity of the speakers, housings, or gaskets. In the event of a severe impact to your unit please return the unit to Grace Digital to review for potential damage.
3) Never open the auxiliary door in a water environment. This could cause water to ingress into the unit which could potentially be hazardous and cause a fire or a spark.
4) Never connect a device to the auxiliary input jack when in a water environment. The auxiliary jack should only be used in a dry environment.
5) Never attempt to fix, repair your ECOXGEAR unit. Please send it back to Grace Digital for any assessments and repairs.
CARE, MAINTENANCE & PRECAUTIONS:
1) The unit is waterproof only when the cap is properly closed.
2) Close the cap properly before use. If the unit is placed in water without the cap properly closed, water may enter into the unit and void your warranty.
Using the Sun to Power Sol Jam
Power ON
Ensure the Master Power Switch is set to the ON position. Solar charging will NOT work if the Master Power Switch is OFF.
The solar panel will recharge the battery within Sol Jam if Sol Jam is ON or in Standby Power mode.
Solar Charging
Place Sol Jam in direct sunlight. The solar charging is most efficient if the entire solar panel on Sol Jam is directly facing the sun without any obstacles in the way.
You can verify that the sun is charging Sol Jam by viewing the five blue LEDs on the Sol Jam unit. When the sun is
Loading...
+ 9 hidden pages