Goodmans GCR02 User Manual

GCR02 Alarm Clock Radio User Guide

The symbol on the product or on its packaging indicates that this

product may not be treated as household waste. Instead it shall be handed

over to the applicable collection point for the recycling of electrical and

electronic equipment. By ensuring this product is disposed of correctly, you

will help prevent potential negative consequences for the environment and

human health, which could otherwise be caused by inappropriate waste

handling of this product.

For more detailed information about recycling of this product, please

contact your local city ofﬁ ce, your household waste disposal service or the

shop where you purchased the product.

1. Controls

1 2 3 4 5 6 7 8 9

Standby/stop; Radio on/off

Alarm 2; Volume down

Alarm 1; Volume up

3 4

Nap/Sleep

Snooze; Brightness

Set clock; Memory

Hour setting; Setting down

Minute setting; Setting up

Auto scan and preset radio stations

www.goodmans.co.uk

FEB14-GCR02-REV3

3. Setting the Alarm

1. Press and hold the Alarm 1 button ( ) until the numbers ﬂ ash.

2. Press the Hour setting button ( ) to set the hours. Note: This unit

uses the 24-hour clock.

3. Press the Minute setting button ( ) to set the minutes.

4. Press the Alarm 1 button to set the selected time.

5. Press the Setting down ( ) or Setting up ( ) button to select

whether the alarm will use the buzzer or the FM radio.

Note: ‘bb’ means to wake by buzzer and ‘F’ means to wake by FM radio.

6. Press the Alarm 1 button to conﬁ rm the selection. The Alarm

indicator on the face of the unit lights up.

Note: Follow the same steps to set Alarm 2 ( ).

7 8

4. Switching Off the Alarm

Snooze (alarm sounds again 9 minutes later)

2. Setting the Clock

1. Press and hold the Set clock button ( ) until the numbers ﬂ ash.

2. Press the Hour setting button ( ) to set the hours. Note: This unit

uses the 24-hour clock.

3. Press the Minute setting button ( ) to set the minutes.

4. Press the Set clock button to set the selected time.

Press the Snooze button ( ).

Stop (alarm sounds at same time next day)

Press the Standby button ( ) or the relevant Alarm button ( or ).

Cancel Alarm (alarm switched off)

Press the relevant Alarm button ( or ).

3 2

5. Nap Function

While the unit is in standby mode you can use it as a nap timer by setting it to sound the buzzer

after a ﬁ xed period of time.

9. Changing the Batteries

1. Press the Nap button ( ). Each press of the Nap button cycles

through the available nap times (in minutes):

120 - 90 - 60 - 30 - 15 - 10 - 5 - OFF

2. When the buzzer sounds, press the Nap button or the Standby ( )

button to silence it.

To cancel the Nap function, press the Nap button until OFF is displayed.

6. Tuning the Radio

Press the Radio on/off button ( ) to switch on the radio. For best results, extend the FM wire

antenna.

Manual Search

Press the Setting down ( ) or Setting up ( ) button to search for a radio station.

Automatic Search

Press and hold the Setting down ( ) or Setting up ( ) button until the automatic search

starts. The search will stop when a station is found. Press the button again to continue the search.

Storing a Station in the Presets List

7 8

This unit is powered from the mains using the the AC power cord supplied. Backup time keeping

can be powered by two 1.5V AAA/R03/UM4 batteries (not included). For optimal performance, we

recommend Alkaline batteries.

Note: The unit will not work on batteries alone. They are only used for backup time keeping.

10. Technical Specifications

Power Supply: AC 230V~50Hz, 4W consumption

DC 3V 2x 1.5V AAA/R03/UM4 backup batteries (not supplied)

Radio: 87.5 - 108Mhz FM

Dimensions: 120(L) x 64(W) x 77(H) mm

The unit can store up to 20 radio stations in the presets list. To do so:

1. Search for a radio station.

2. Press the Memory button ( ). P01 will ﬂ ash on the display.

3. Press the Setting down or Setting up button to select the required preset location.

4. Press the Memory button to save the station to the selected preset location.

Alternatively, press and hold the Auto scan button ( ) to store the ﬁ rst 20 FM stations in the

presets.

To Select a Preset Station From the List

Press the Auto scan button to select the required preset. Each press of the button cycles through

the list of presets.

7. Sleep Function

You can set the unit to switch the radio off after a set period of time. This enables you to fall

asleep to the radio.

Press the Sleep button ( ). Each press of the Sleep button cycles through the available sleep

times (in minutes):

11. Safety

Do not block the ventilation slots with items such as newspapers, tablecloths, curtains, etc. Leave

a minimum of 5cm clear around the unit for sufﬁ cient ventilation.

Do not place naked ﬂ ame sources, such as candles, on top of the unit.

Do not place objects ﬁ lled with liquid, such as vases, on the unit.

Do not expose the unit to dripping or splashing.

Do not dispose of batteries in the ﬁ re. Do not expose batteries to excessive heat, such as direct

sunlight or ﬁ re.

The mains plug is used to disconnect the device. To completely disconnect the unit, remove the

plug completely from the mains.

The mains plug should not be obstructed and should be easily accessible during intended use.

The marking plate is on the bottom of the unit.

If the unit is affected by electrical fast transient and/or electrostatic phenomenon, the unit may

malfunction and require the user to power reset it.

Use the unit in moderate climates.

120 - 90 - 60 - 30 - 15 - 10 - 5 - OFF

To cancel the Sleep function, press the Sleep button until OFF is displayed.

8. Dimmer

To adjust the brightness of the display, press the Brightness button ( ). Each press of the

Brightness button cycles through the available brightness settings:

HIGH - LOW - OFF

Caution: To reduce the risk of electric shock, do not remove the cover or back.

There are no user serviceable parts inside the unit. Refer all servicing to qualiﬁ ed personnel.

Caution: Danger of explosion if the batteries are incorrectly replaced. Replace only with the same

or equivalent type.

The lightning with arrow symbol in the triangle is a warning sign alerting the user to

‘dangerous voltage’ inside the unit.

The exclamation mark in the triangle is a warning sign alerting the user to important

instructions accompanying the product.