Goodman GPC1448H41D, GPC1448H41E, GPC1460H41C, GPC1460H41D, GPC1460H41E User Manual

...
Service Instructions
®
*PH 13 & 14 P ACKAGE HEA T PUMPS
*PC 13 & 14 P ACKAGE COOLING
HORIZONTAL MODELS
WITH R-410A
®
is a registered trademark of Maytag Corporation or its related companies and is used under license to Goodman Company, L.P., Houston, TX. All rights reserved.
©2008 - 2013 Goodman Manufacturing Company, L.P.
RS6300011r12
September 2013
1
INDEX
IMPORT ANT INFORMA TION ......................................................................................................... 4 - 5
PRODUCT IDENTIFICATION - *PC/*PH[13-14]**H41**............................................................... 6 - 8
ACCESSORIES................................................................................................................................... 9
PCCP101-103 ROOF CURB ........................................................................................................................................ 10
PCP101-103 DOWNFLOW PLENUM .......................................................................................................................... 10
PCEF101-103 ELBOW AND FLASHING KIT ................................................................................................................11
PCE101-103 ECONOMIZER ..........................................................................................................................................11
PCMD101-103 DOWNFLOW MANUAL DAMPER ....................................................................................................... 12
HMD101-103 HORIZONT AL MOTORIZED DAMPER WITH DUCT FLANGE........................................................... 12
GP
SQRPC SQUARE TO ROUND CONVERTER............................................................................................................... 13
SQRPCH SQUARE TO ROUND CONVERTER ............................................................................................................ 13
PCFR101-103 EXTERNAL FIL TER KIT ....................................................................................................................... 14
PRODUCT DESIGN .......................................................................................................................... 15
ELECTRICAL WIRING ................................................................................................................................................. 16
LINE VOLT AGE WIRING.............................................................................................................................................. 17
SYSTEM OPERATION ...................................................................................................................... 18
*PC/*PH[13-14]**H41**
COOLING .................................................................................................................................................................... 18
COOLING CYCLE........................................................................................................................................................ 18
HEA TING CYCLE......................................................................................................................................................... 18
DEFROST CYCLE ....................................................................................................................................................... 19
FAN OPERA TION ........................................................................................................................................................ 19
SCHEDULED MAINTENANCE ......................................................................................................... 22
ONCE A MONTH ......................................................................................................................................................... 22
ONCE A YEAR............................................................................................................................................................. 22
TEST EQUIPMENT...................................................................................................................................................... 22
SERVICING ....................................................................................................................................... 23
COOLING/HEA T PUMP- SERVICE ANAL YSIS GUIDE ................................................................................................ 23
S-1 CHECKING VOL TAGE ........................................................................................................................................... 24
S-2 CHECKING WIRING .............................................................................................................................................. 24
S-3 CHECKING THERMOST A T , WIRING , AND ANTICIP A TOR.................................................................................... 24
S-3A Thermostat and Wiring ..................................................................................................................................... 24
S-3B Cooling Anticipator ........................................................................................................................................... 25
S-3C Heating Anticipator ........................................................................................................................................... 25
S-4 CHECKING TRANSFORMER AND CONTROL CIRCUIT ....................................................................................... 25
S-7 CHECKING CONT ACTOR AND/OR RELA YS........................................................................................................ 25
S-8 CHECKING CONT ACTOR CONT ACTS .................................................................................................................. 26
S-9 CHECKING FAN RELA Y CONTACTS..................................................................................................................... 26
S-11 CHECKING LOSS OF CHARGE PROTECT OR ................................................................................................... 27
S-15 CHECKING CAP ACITOR ..................................................................................................................................... 27
S-15A RESIST ANCE CHECK ....................................................................................................................................... 28
S-15B CAP ACITANCE CHECK ..................................................................................................................................... 28
S-16 CHECKING MOTORS .......................................................................................................................................... 29
S-16A CHECKING F AN AND BLOWER MOTOR WINDINGS (PSC MOT ORS) ............................................................ 29
S-16D CHECKING EEM MOTORS ............................................................................................................................... 29
S-17 CHECKING COMPRESSOR WINDINGS ............................................................................................................. 30
S-17A RESIST ANCE TEST .......................................................................................................................................... 30
S-17B GROUND TEST ................................................................................................................................................. 30
2
INDEX
S-17D Operation T est ................................................................................................................................................. 31
S-18 TESTING CRANKCASE HEA TER ........................................................................................................................ 31
S-18A CHECKING CRANKCASE HEA TER THERMOST AT........................................................................................... 31
S-21 CHECKING REVERSING V ALVE AND SOLENOID .............................................................................................. 31
S-24 TESTING DEFROST CONTROL .......................................................................................................................... 32
S-25 TESTING DEFROST THERMOST AT.................................................................................................................... 32
S-50 CHECKING HEA TER LIMIT CONTROL(S) ........................................................................................................... 32
S-52 CHECKING HEA TER ELEMENTS ........................................................................................................................ 32
S-100 REFRIGERA TION REPAIR PRACTICE............................................................................................................... 33
S-101 LEAK TESTING ................................................................................................................................................. 33
S-102 EV ACUA TION..................................................................................................................................................... 33
S-103 CHARGING ........................................................................................................................................................ 34
S-104 CHECKING COMPRESSOR EFFICIENCY ......................................................................................................... 35
S-108 SUPERHEA T ...................................................................................................................................................... 35
S-109 CHECKING SUBCOOLING ................................................................................................................................36
S-11 1 FIXED ORIFICE RESTRICTION DEVICES ......................................................................................................... 36
S-112 CHECKING RESTRICTED LIQUID LINE ............................................................................................................ 37
S-113 REFRIGERANT OVERCHARGE ......................................................................................................................... 37
S-114 NON-CONDENSABLES...................................................................................................................................... 37
S-115 COMPRESSOR BURNOUT ................................................................................................................................40
S-122 REVERSING VA LVE REPLACEMENT................................................................................................................ 40
S-200 CHECKING EXTERNAL ST A TIC PRESSURE .................................................................................................... 41
S-201 CHECKING TEMPERA TURE RISE ..................................................................................................................... 41
WIRING DIAGRAMS.......................................................................................................................... 42
OT18-60A OUTDOOR THERMOST A T ......................................................................................................................... 42
OT18-60A OUTDOOR THERMOST A T ......................................................................................................................... 43
SINGLE PHASE HKR** HEA T KITS ............................................................................................................................ 44
PCE* ECONOMIZER .................................................................................................................................................... 45
SPK* - SINGLE POINT WIRING KIT ......................................................................................................................... 46
3
IMPORTANT INFORMATION
Pride and workmanship go into every product to provide our customers with quality products. It is possible, however, that during its lifetime a product may require service. Products should be serviced only by a qualified service technician who is familiar with the safety procedures required in the repair and who is equipped with the proper tools, parts, testing instruments and the appropriate service manual. REVIEW ALL SERVICE INFORMATION IN THE APPROPRIATE
SERVICE MANUAL BEFORE BEGINNING REPAIRS.
IMPORTANT NOTICES FOR CONSUMERS AND SERVICERS
RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS
WARNING
T
HIS UNIT SHOULD NOT BE CONNECTED TO. OR USED IN CONJUNCTION WITH, ANY DEVI CES THAT ARE NOT DESIGN CERTIFI ED FOR US E WITH THI S UNIT OR HAV E NOT BEEN TESTED AND APPROVED BY FROM THE USE OF DEVICES THAT HAVE NOT BEE N APPROVED OR CERTIFED BY
GOODMAN. SERIOUS PROPERTY DAMAGE OR PERSONAL INJURY, REDUCED UNIT PERFORMANCE AND/OR HAZARDOUS CONDITI ONS MAY RESULT
GOODM AN .
WARNING
T
O PREVENT THE RISK OF PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH, DO NOT STORE COMBUSTIBLE MATE RIALS OR USE GASOLINE OR OTHER FLAMMABLE LIQUIDS OR VAPORS IN THE VICINITY OF THIS APPLIANCE.
WARNING
GOODMAN WILL NOT BE RESPONSIBLE FOR ANY INJURY OR PROPERTY DAMAGE ARISING FROM IMPROPER SERVICE OR SERVICE PROCEDURES. IF YOU INSTALL OR PERFORM SERVICE ON THIS UNIT, YOU ASSUME RESPONSIBILITY FOR ANY PERSONAL INJURY OR PROPERTY DAMAGE WHICH
MAY RESU LT.
MANY JURISDICTIONS REQUIRE A LICENSE TO INSTALL OR SERV ICE HEATING AND AIR CONDITIONING EQUIPMENT.
To locate an authorized servicer, please consult your telephone book or the dealer from whom you purchased this product. For further assistance, please contact:
CONSUMER INFORMA TION LINE
GOODMAN® BRAND PRODUCTS
TOLL FREE 1-877-254-4729 (U.S. only)
email us at: customerservice@goodmanmfg.com
fax us at: (713) 856-1821
(Not a technical assistance line for dealers.)
Outside the U.S., call 1-713-861-2500
(Not a technical assistance line for dealers.)
Your telephone company will bill you for the call.
4
IMPORTANT INFORMATION
SAFE REFRIGERANT HANDLING
While these items will not cover every conceivable situation, they should serve as a useful guide.
WARNING
REFRIGERANTS ARE H EAVIER T HAN AIR. THEY CAN "PUS H OUT" THE
OXYGEN IN YOUR LUNGS OR IN ANY ENCLOSED SPACE. POSSI BLE DIFFI CULTY IN BRE ATHIN G OR DEATH:
EVER PURGE REFRIGERANT INTO AN ENCLOSED ROOM OR SPACE. BY
N
LAW, ALL REFRIGERANTS MUST BE RECLAIMED.
IF AN INDOOR LEAK IS SUSPECTED, THOROUGHLY VENTIL ATE THE AREA
• BEFORE BEGINNING WORK.
IQUID REFRIGERANT CAN BE VERY COLD. TO AVOID POSSIBLE FROST-
L
BITE OR BL INDNESS, AVOID CONTACT W ITH REFR IGERANT AND WEAR
I
GLOVES AND GOGGLES. SKIN OR EYES, SEEK MEDICAL HELP IMMEDIATELY.
A
LWAYS FOLLOW
• AS POIS ONOUS GA S WILL BE PRODUC ED.
F LIQUID REFRIGERANT DOES CONTACT YOUR
EPA
REGULATIONS. NEVER BURN REFRIGERANT,
O AVO ID
T
WARNING
TO AVOID POSSIBLE EXPLOSION:
EVER APPLY FLAME OR S TEAM TO A REFRIGERAN T CYLINDER. IF YOU
N
MUST HEAT A CYLINDE R FOR FASTER CHARGING , PARTIALLY IMMERSE IT IN WARM WATER.
NEVER FILL A CYLINDE R MORE THAN 80% FULL OF LIQUID REFRIGERANT.
NEVER ADD ANYTHING OTHER THAN R-22 TO AN R-22 CYLINDER OR
R-410A TO AN R-410A CYLINDER . THE SERVICE EQUIPMENT USED MUST
BE LISTED OR CERTIF IED FOR THE TYPE OF REF RIGERANT USED.
TORE CYLINDERS IN A CO OL, DRY PLACE. NEVER USE A CYLIND ER
S
AS A PLATFORM OR A ROLLER.
WARNING
TO AVOID POSSIBLE EXPLOSION, USE ONLY RETURNABLE (NOT DISPOSABLE)
SERVICE CYLINDERS WHEN REMOVING REFRIGERANT FROM A SYSTEM.
ENSURE THE CYLINDER IS FREE OF DAMAGE WHICH COULD LEAD TO A
LEAK OR EX PLOS ION.
ENSURE THE HYDROST ATIC TEST DATE DOES NO T EXCEED 5 YEARS.
ENSURE THE PRESSURE RATING MEETS OR EXCEEDS 400 LBS.
WHEN IN DOUBT, DO NOT USE CYLINDER.
WARNING
WARNING
SYSTEM CONTAMINANTS, IMPROPER SERVICE PROCEDURE AND/OR PHYSICAL
ABUSE AFFECTING HERMETIC COMPRESSOR ELE CTRICAL TERMINALS MAY CAUSE DANGEROUS SYSTEM VENTING.
The successful development of hermetically sealed refrig­eration compressors has completely sealed the compressor's moving parts and electric motor inside a common housing, minimizing refrigerant leaks and the hazards sometimes as­sociated with moving belts, pulleys or couplings.
Fundamental to the design of hermetic compressors is a method whereby electrical current is transmitted to the com­pressor motor through terminal conductors which pass through the compressor housing wall. These terminals are sealed in a dielectric material which insulates them from the housing and maintains the pressure tight integrity of the her­metic compressor. The terminals and their dielectric em­bedment are strongly constructed, but are vulnerable to care­less compressor installation or maintenance procedures and equally vulnerable to internal electrical short circuits caused by excessive system contaminants.
T
O AVOID POSSIBLE INJURY, EXPLOSION OR DEATH, PRACTICE SAFE
HANDLING OF REFRIGERANTS.
In either of these instances, an electrical short between the terminal and the compressor housing may result in the loss of integrity between the terminal and its dielectric embed­ment. This loss may cause the terminals to be expelled, thereby venting the vaporous and liquid contents of the com­pressor housing and system.
A venting compressor terminal normally presents no danger to anyone, providing the terminal protective cover is properly in place.
If, however, the terminal protective cover is not properly in place, a venting terminal may discharge a combination of
(a ) hot lubricating oil and refrigerant (b ) flammable mixture (if system is contaminated
with air)
in a stream of spray which may be dangerous to anyone in the vicinity. Death or serious bodily injury could occur.
Under no circumstances is a hermetic compressor to be elec­trically energized and/or operated without having the terminal protective cover properly in place.
See Service Section S-17 for proper servicing.
5
PRODUCT IDENTIFICATION
®
The model number is used for positive identification of component parts used in manufacturing. Please use this number when requesting service or parts information.
G/A P C 13 24 H 4 1 * *
BRAND:
G: Goodman
Brand
A: Aman a
®
Brand
Cooling/Heating
®
PRODUCT
TYPE:
Package
13: 13 SEER 14: 14 SEER
PRODUCT
FAMILY:
C: Coolin g H: He at Pump
PRODUCT
SERIES:
Rating Rating
24: 24, 000 BTUH 30: 30, 000 BTUH 36: 36, 000 BTUH 42: 42, 000 BTUH 48: 48, 000 BTUH 49: 48, 000 BTUH 60: 60, 000 BTUH
CONFIGURATION:
NOMINAL
CAPACITY:
MINOR
REVISION:
H: Horizontal
MAJOR
REVISION:
REFRIGERANT:
4: R-410A
VOLTAGE:
1: 208-230V /1ph/60Hz 3: 208-230v/3p h / 60Hz 4: 460v/3ph/60Hz
CHASSI S SIZES
SMALL MEDIUM LARGE
*PC/ *P H13 24- 30 *PC/ *P H13 36-4 2, *PC1 349 *PC/ *P H134 8, 60 *PC/*PH1424-30 *PC/*PH1436-42 *PC/*PH1448-60
®
is a registered trademark of Maytag Corporation or its related companies and is used under license to Goodman Company, L.P., Houston, TX. All rights reserved.
6
PRODUCT IDENTIFICATION
MODE L # PACKAGE COOLING DE SCRIPTION
GPC1324-42H41AA GPC1348-60H41BA
GPC1324-42H41AB
GPC1349H41AA GPC1360H41BB
GPC1324-49H41BA
GPC1360H41C A
GPC1324-42H41AC
GPC1349H41AB GPC1360H41BC
GPC1424-48H41AA
GPC1424-48H41AB
GPC1424-48H41BA
GPC1460H41BA
GPC1424-48H41AC
GPC1460H41AB
GPC1324H41C A GPC1424H41C A
GPC1330-49H41CA
GPC1360H41D A
GPC1430-60H41CA
oodman® Brand or Distinctions Package Cooling -
G
13 Seer 208-230/1/60 Single -Phase Elect ric Cooling Unit with R-410A
oodman
G
®
Brand or Distinc tions
ackage Coo l ing -
P
13 Seer 208-230/1/60 Single -Phase Elect ric Cooling U nit wit h R-410A. Models with 5 mm condenser coils.
G
oodman
Brand or Distinc tions
P
ackage Coo l ing -
®
13 Seer 208-230/1/60 Single -Phase Elect ric Cooling U nit wit h R-410A. Models w ith aluminum evaporat or coils .
oodman
G
®
Brand or Distinc tions
ackage Coo l ing -
P
13 Seer 208-230/1/60 Single -Phase Elect ric Cooling U nit wit h R-410A. Adds " T" to liquid line and re-locates t he p ressure switch on "H" series coo ling models.
oodman® Brand or Distinctions Package Cooling -
G
14 Seer 208-230/1/60 Single -Phase Elect ric Cooling U nit wit h R-410A.
oodman® Brand or Distinctions Package Cooling -
G
14 Seer 208-230/1/60 Single -Phase Elect ric Cooling U nit wit h R-410A. Models with 5 mm condenser coils.
G
oodman® Brand or Distinctions Package Cooling ­14 Seer 208-230/1/60 Single -Phase Elect ric Cooling U nit wit h R-410A. Models w ith aluminum evaporat or coils .
oodman® Brand or Distinctions Package Cooling -
G
14 Seer 208-230/1/60 Single -Phase Elect ric Cooling U nit wit h R-410A. Mode ls with 5 mm condenser coils and aluminum evaporator coils.
oodman
G
®
Brand or Distinc tions
ackage Coo l ing -
P
14 Seer 208-230/1/60 Single -Phase Elect ric Cooling U nit wit h R-410A. Adds " T" to liquid line and re-locates t he p ressure switch on "H" series coo ling
models.
G
oodman
®
Brand or Distinc tions
P
ackage Coo l ing ­13 & 14 Seer 2 08-230/1/60 Single-Phase Electric Cooling Unit with R-410A. Two ton model s with a Rechi c ompressor.
G
oodman
®
Brand or Distinc tions
P
ackage Coo l ing ­13 & 14 Seer 2 08 -230/1/6 0 Si n gle-Phase Elec tric Cooling Unit with R-410A. Models with Broad Ocean Digi motor.
APC1324-49H41CA
APC1360H41DA
®
mana
A
Brand or Dis tinct ions Package Cooling ­13 Seer 208-230/1/60 Single -Phase Elect ric Cooling U nit wit h R-410A. New models will fi ll gaps current ly in product line.
7
PRODUCT IDENTIFICATION
MODEL # PACKAGE HEAT PUMP DESCRIPTION
GPH1324-42H41AA GPH1348-60H41BA
GPH1324,30,42H41AB
GPH1336H41AC GPH1348-60H41BB GPH1424-60H41AB
GPH1424-60H41AA
GPH1324-42H41AC GPH1348-60H41BC GPH1424-60H41AC
GPH1324-42H41BA GPH1348-60H41CA GPH1424-60H41BA
GPH1324-42H41CA
GPH1348H41D A
GPH1424-60H41CA
APH1324-42H41CA
G
oodman
13 Seer 208-230/1/60 Single -Phase Heat Pump with R-410A.
oodman
G
13 & 14 Seer 2 08-230/1/60 Single-Phase Heat Pump with R-410A. Models are changing to the PCBDM133 defros t control and with the addition of the crankcase heaters where necessary.
G
oodman® Brand or Distinctions Package Hea t Pump -
14 Seer 208-230/1/60 Single -Phase Heat Pump with R-410A.
G
oodman® Brand or Distinctions Package Hea t Pump - 13/14 Seer 208-230/1 /60 Single-Phase H eat Pump with R -410A. Add s "T" to liquid line and re-locates t h e pressure switch on "H " series heat pumps .
oodman® Brand or Distinctions Package Hea t Pump - 13/14 Seer 208-230/1 /60
G
Single-Phase Heat Pump w ith R-410 A. Models with Aluminum Evaporator Coils.
oodman® Brand or Distinctions Package Hea t Pump - 13/14 Seer 208-230/1 /60
G
Single-Phase Heat Pump w ith R-410 A. Models with Broad Ocean Digi motor.
A
mana 13 Seer 208-230/1/60 Single -Phase Heat Pump with R-410A. New models wil l fill gaps cur rent ly in produc t line.
®
Brand or Distinc tions
®
Brand or Distinc tions
®
Brand or Dis tinct ions Package Hea t Pump -
P
ackage Hea t Pump -
ackage Hea t Pump -
P
APH1348-60H41DA
mana® Brand or Dis tinct ions Package Hea t Pump -
A
13 Seer 208-230/1/60 Single -Phase Heat Pump with R-410A. New models wil l fill gaps cur rent ly in produc t line.
8
ACCESSORIES
Part Number D escript ion
OT18-60A OT/H E R- 60A Outdoor Thermostat with Emergency Heat Relay
HKR05A, 08, 10, CA Heater K it for all *PC/*PH (H) Ser ies HKP15* Heater k it for *PC/ *P H13/14 (30-60) ( H) S er ies HKP20* Heater K it for *PC/ *P H13/14 (42-60) (H) S er ies PCCP101- 103 Roof Curb PCP101-103 Downflow Plenum Kit PCP101-103R8 Downflow P lenum Kit w/ R-8 Insulation GPCED101-103 Downfl ow E c onomizer for H Ser ies Pack age Units (A/C) - To Be Used Wit h P CP101-103 GPHED101-103 Downfl ow E c onomizer for H Ser ies Pack age Units (Heat P ump) - To Be Used With PCP101-103 GPCEH101-103 Horizontal Economizer for H Series Package Units (A/C) GPHEH101-103 Horizontal Economizer for H Series Package Units (Heat Pump) PCMD101-103 M anual Damper - To B e Used Wit h PCP 101- 103 PCMDM101-103 Motorized Damper - To Be Used With PCP101-103 GPHMD101-103 Manual Damper for Horizontal Applications SPK* Single Point Wiring Kit SQRPCH101 Square to Round Adapters 16"&14" SQRPCH102-103 Square to Round Adapters 18"&14" SQRPC101 Square to Round Adapter - For Use With P CCP 101-103 Curb 16" R ounds SQRPC102-103 Square to Round Adapt er F or Use With PCCP101-103 Curb 18" Rounds PCFR101-103 External Horizontal Filter Rac k PCEF 101- 103 Elbow & Flashing w/ R-8 Liner CDK36 Flush Mount Conc entric Duc t Kit CDK36515 Flush Mount Conc entric Duc t Kit w/ Fil ter CDK36530 Step D own Conc entric Duct Kit CDK36535 Step D own Conc entric Duct K it w/ Filt er CDK4872 Flush Mount Conc entric Duc t Kit CDK4872515 Flush Mount Conc entric Duc t Kit w/ Fil ter CDK4872530 Step D own Conc entric Duct Kit CDK4872535 Step D own Conc entric Duct K it w/ Filter
*PC/*PH[13-14]**H41*
ACCESS ORI E S * P C/*PH H SERIES
Out door T hermostat (Requir ed for heat pumps with 0° outdoor ambient and 50% or higher relative humidit y.
GOODMAN® BRAND THERMOSTATS
CH70TG Manual Changeover
CHSATG Manual Changeover Mechanical, Nonprog ra m m a ble 1 Heat - 1 Cool
CHT18-60 Manual Changeover
CHT90-120 Manual Changeover
CHTP18-60HD Manual Changeover
CT18-60 Manua l Cha ngeover
Digital, Nonprogramma bl e 1 Heat - 1 Cool
Mechanical, Nonprog ram m able 1 Heat - 1 Cool Mechanical, Nonprog ram m able 2 Heat - 2 Cool
Digital, Nonprogramma bl e 2 Heat - 1 Cool
Mechanical, Nonprog ra m m a ble Cool Only
AMANA® BRAND THERMOSTATS
1213401 White Manual Changeover 1213402 White Manual Changeover 1213403 White Manual Changeover 1213404 White Manual Changeover 1213406 1213407 1213408 1213410 1213411 1213412 1213431
Beige White
White White White White
White
Manual/Auto Changeover
Manual Changeover
Manual/Auto Changeover
Manual Changeover
Manual Changeover Manual/Auto Changeover Manual/Auto Changeover
5 + 2 Programming Digital 1 Heat - 1 Cool
Nonprogrammable Digital 1 Heat - 1 Cool
7 Day Programming Digital 2 Heat - 1 Cool
Nonprogrammable Digital 2 Heat - 1 Cool 5 + 2 Programming Digital 3 Heat - 2 Cool 5 + 2 Programming Digital 2 Heat - 2 Cool
7 Day Programming Digital 1 Heat - 1 Cool
5 + 2 Programming Digital 2 Heat - 1 Cool
Nonprogrammable Digital 2 Heat - 2 Cool
7 Day Programming Digital 3 Heat - 2 Cool 7 Day Programming Digital 3 Heat - 2 Cool
9
ACCESSORIES
33"
*PC/*PH[13-14]H41*
PCCP101-103 ROOF CURB
64"
59"
29 3/8"
29 3/4"
33"
28 3/4"
31"
26"
PCP101-103 DOWNFLOW PLENUM
(Use with PCCP Roof Curb)
14"
1" Flange
Roof Curb
10
37"
13"
25 1/2"
33"
13"
ACCESSORIES
*PC/*PH[13-14]H41*
PCEF101-103 ELBOW AND FLASHING KIT
28"
35"
25"
33"
3"
4"
20 3/8"
17 3/4"
4"
25"
8"
PCE*101-103 ECONOMIZER*
(DOWNFLOW APPLICATIONS)
5"
27 3/4"
16 1/2"
17 3/4"
20" x 17 1/2"
Filter
3"
31 1/4"
Model Use d With
PCEC101-103* *PC HORIZONTAL A/C PCEH101-10 3* *P H HO RIZONTAL HP
*Must be used with PCP101-103
11
ACCESSORIES
PCMDM101-103 DOWNFLOW MOTORIZED DAMPER*
2
1
PCMD101-103 DOWNFLOW MANUAL DAMPER*
*USED WITH PCP101-103 DOWNFLOW PLENUM
"
8
/
1
*PC/*PH[13-14]H41*
6"
10"
29 3/4"
MODEL DESCRIPT ION
PCM DH 101 - 103 Ma nua l Dampe r
PCMDM101-103 Motorzied Damper
GPHMD101-103 HORIZONTAL MANUAL DAMPER WITH DUCT FLANGE
18"
8
1
/
4
"
18"
12
25 1/4"
2"
12"
6"
17"
17 1/4"
ACCESSORIES
"
A
*PC/*PH[13-14]H41*
SQRPC SQUARE TO ROUND CONVERTER
(DOWNFLOW APPLICATIONS)
1" FLANGES
1 1/2
SA
RA
OUTER FLANGE
29 1/2"
29 1/4"
SA 16" 18" RA 16" 18"
SQRPCH SQUARE TO ROUND CONVERTER
(HORIZONTAL APPLICATIONS)
SQUARE TO ROUND DUCT CONVERTER PANEL
BEAD
A
SQRPC101 SQRP102-103
C
2"
RETURN
2"
SUPPLY
B
STARTER FLANGE
SQRPCH-101 SQRPCH-102 SQRPCH-103 SQRPCH102-14 SQRPCH103-14
15" 17" 17" 15" 15"
B 15" 17" 17" 15" 15" C 17" 17" 19" 15" 15" D 22 1/2" 24 1/2" 24 1/2" 24 1/2" 24 1/2"
SUPPLY 14" 16" 16" 14" 14"
RETURN 16" 16" 18" 14" 14"
D
13
ACCESSORIES
*PC/*PH[13-14]H41*
PCFR101-103 EXTERNAL FILTER KIT
(HORIZONTAL APPLICATIONS)
14" x 25" x 2" FILTER
14
Loading...
+ 32 hidden pages