ACHTUNG! Lesen Sie die Betriebsanleitung vollstän dig und sorgfältig durch. Sie ist Bestandteil des
Produktes und enthält wichtige Hinweise zur
korrekten Installation und Benutzung. Bewahren Sie
sie auf, damit Sie diese bei Unsicher heiten und
Weitergabe des Produktes parat haben.
7 Wartung, Pege, Lagerung und Transport 5
8 Problembehebung 6
9 Gewährleistung und Haftung 6
10 Technische Daten 6
11 Entsorgungshinweise 7
12 CE-Konformitätserklärung 7
1 Sicherheitshinweise:
ACHTUNG! Die Montage und Demontage des
Produktgehäuses sowie die Wartung der Elektronik
darf nur durch ausgebildetes Elektro-Fachpersonal
erfolgen!
ACHTUNG! Brandgefahr durch Kurzschluss und
Überhitzung!
Achten Sie auf ausreichende Belüftung und feuerfeste,
solide Unterlagen!
ACHTUNG! Kurzschlussgefahr!
Überbrücken Sie keine Kontakte!
Stecken Sie keine Gegenstände in Lüftungsschlitze
oder Anschlussbuchsen!
ACHTUNG! Verletzungsgefahr durch Stolpern!
Achten Sie auf sichere Kabelverlegung!
• Ihr Produkt ist kein Spielzeug und gehört nicht in
Kinderhände, weil zerbrechliche, kleine und verschluck-
bare Teile enthalten sind, die bei unsachgemäßem
2
Page 3
Gebrauch Personen schädigen können!
• Bitte installieren und lagern Sie das Produkt und dessen
Zubehör so, dass keine Personen oder Sachen z.B. durch
Herabstürzen oder Stolpern verletzt oder beschädigt
werden können.
• Lassen Sie Verpackungsmaterial nicht einfach liegen, da
sich spielende Kinder daran schneiden können. Weiterhin
besteht die Gefahr des Verschluckens und Einatmens
von Kleinteilen und Dämmmaterial.
• Stellen Sie anhand der Bedienungsanleitung Ihres zu
betreibenden Gerätes, wie Laptop, Handy, usw. sicher,
dass die Anschlüsse und Betriebsspannungen zum
Spannungswandler kompatibel sind und umgekehrt.
• Ein defektes Gerät darf nicht in Betrieb genommen werden,
sondern muss sofort vom Netz getrennt und gegen eine
unbeabsichtigte Weiterbenutzung gesichert werden.
Im Reparaturfall darf das Gerät nur von Elektro-Fachkräf ten geöffnet und repariert werden, die aufgrund ihrer
Ausbildung dazu befugt sind. Ein Selbsteingriff birgt die
Gefahr eines Stromschlags und führt zum Erlöschen des
Garantieanspruchs.
• Betreiben Sie das Gerät nur am 24 V DC KFZ-Bordnetz.
• Trennen Sie alle Kabelverbindungen bei Nichtgebrauch und
Gewitter.
• Setzen Sie das Gerät keiner starken Hitze oder Feuchtig keit aus, bzw. Stellen, die mit Wasser in Berührung
kommen können.
• Legen und stellen Sie keine Gegenstände auf das Gerät.
• Setzen Sie das Gerät und dessen Zubehör keinen hohen
mechanischen Belastungen aus.
• Modizieren und ändern Sie den Artikel und dessen
Zubehörteile nicht! Beachten Sie dazu auch das Kapitel
„Gewährleistung und Haftung“
• Verwenden Sie keine beschädigten Teile.
• Das Gerät darf nur im Trockenen installiert und betrieben
werden.
• Das Gerät erwärmt sich während des Betriebes.
• Lassen Sie das Gerät im Betrieb NIE unbeaufsichtigt!
2 Beschreibung und Funktion:
Dieses Produkt ist ein Spannungswandler für den KFZ-Betrieb,
der Eingangsspannungen von 18-30 V DC in eine Ausgangsspannung von 12,5 V DC wandelt. Somit kann sämtliches 12 V
KFZ-Zubehör, wie Lampen oder Kühlboxen auch z.B. in LKWs
mit 24 V betrieben werden. Es ist weltweit einsetzbar und kann
mit einer Dauerleistung von max. 125 Watt belastet werden.
Ihr Produkt ist nur zum Laden und betreiben der in Kapitel 1
genannten Geräte vorgesehen. Ein anderer Gebrauch ist
nicht gestattet. Die Verwendung darf nur in trockenen
Innenräumen erfolgen. Das Nichtbeachten und Nichteinhal-
ten dieser Bestimmungen und der Sicherheitshinweise kann
zu schweren Unfällen und Schäden an Personen und
Sachen führen.
4 Lieferumfang:
5 Grasche Darstellung:
- 1 x Spannungswandler
- 1 x Betriebsanleitung
Spannungswandler-
gehäuse
Kühlrippen
DC-Ausgangsbuchse 12,5 V
DC-Eingangsstecker 18-30 V
6 Bedienung:
Der Gerätestecker ist der 18-30 V DC Spannungseingang.
Der zentrale Kontaktstift ist der positive und die beiden
Metallfedern der negative Pol.
Die Gerätebuchse ist der 12,5 V DC Spannungsausgang.
Der zentrale Kontakt ist ebenfalls der positive und die
Außenkontakte sind der negative Pol.
1. Kontrollieren Sie die Polung der Eingangs spannung und
die Leistung Ihres zu betreibenden Gerätes. Wird das
Gerät überladen, kann die Sicherung durchbrennen.
2. Stellen Sie den Spannungswandler auf eine nicht
brennbare, gerade Unterlage.
3. Stecken Sie den DC-Stecker des Spannungswandlers in
eine 18-30 V DC-Steckdose. Es liegen nun 12,5 V DC an
der DC-Ausgangsbuchse des Gerätes an.
4. Stecken Sie den 12 V-Netzstecker Ihres KFZ-Zubehörs in
die DC-Buchse des Spannungswandlers. Beachten Sie
die max. Leistung von 125 Watt um das Gerät und die
Leitungen nicht zu beschädigen.
4
Page 5
4. Liegt trotz korrekten Anschlusses keine Ausgangs-
spannung an, überprüfen Sie, ob die Eingangsspannung
im angebebenen Spannungsbereich liegt.
Beachten Sie, dass Wärme- oder Kälte erzeugende Geräte
evtl. eine zu hohe Leistung für den Spannungswandler
haben.
Die Sicherung darf nur durch geschultes
Fachpersonal gewechselt werden.
7 Wartung, Pege, Lagerung und Transport:
ACHTUNG! Brandgefahr durch Kurzschluss und
Überhitzung!
Achten Sie auf ausreichende Belüftung und feuerfeste,
solide Unterlagen!
ACHTUNG! Kurzschlussgefahr!
Überbrücken Sie keine Kontakte!
Stecken Sie keine Gegenstände in Lüftungsschlitze
oder Anschlussbuchsen!
ACHTUNG! Verletzungsgefahr durch Stolpern!
Achten Sie auf sichere Kabelverlegung!
• Das Produkt ist wartungsfrei.
• Trennen Sie das Produkt bei Nichtgebrauch vom Strom netz.
• Reinigen Sie es nur mit einem trockenen Leinentuch.
Gehen Sie beim Reinigen vorsichtig vor, um Kratzer zu
vermeiden. Bei starken Verschmutzungen kann das
Reinigungstuch leicht mit Wasser angefeuchtet werden.
Achten Sie dabei auf stromführende Leitungen. Setzen
Sie keine Reinigungsmittel oder Chemikalien ein, da dies
das Material angreifen kann. Es darf keine Feuchtigkeit in
das Produktinnere gelangen.
• Vermeiden Sie Stellen mit hohen Temperaturen und
Feuchtigkeit, bzw. Stellen, die nass werden können, auch
bei Wartung, Pege, Lagerung und Transport.
• Lagern Sie Ihr Produkt bei längerem Nichtgebrauch für
Kinder unzugänglich und in trockener und staubgeschüt-
ter Umgebung.
• Heben Sie die Originalverpackung für den Transport auf,
um Schäden zu vermeiden.
5
Page 6
Betriebsanleitung
8 Problembehebung:
ProblemAbhilfe
Der Spannungswandler
funktioniert nicht.
unangenehme Gerüche,
Brummen, usw.
andere Fragen• Wenden Sie sich an Ihren
9 Gewährleistung und Haftung:
• Der Hersteller gewährt auf ein neues Produkt 2 Jahre
gesetzliche Gewährleistung und Garantie.
• Da der Hersteller keinen Einuss auf die Installation des
Produktes hat, deckt die Gewährleistung und die Garantie
nur das Produkt selbst ab.
• Falls ein Fehler oder Defekt an Ihrem Gerät festgestellt
werden sollte, wenden Sie sich bitte an Ihren Fachhändler
und zeigen Sie ggf. Ihre Quittung oder Rechnung als
Kaufnachweis vor. Ihr Händler wird den Fehler entweder
vor Ort beheben, oder das Produkt an den Hersteller
weiterleiten. Sie erleichtern unseren Technikern ihre
Arbeit sehr, wenn Sie eventuelle Fehler ausführlich
beschreiben – nur dann haben Sie Gewähr, dass auch
selten auftretende Fehler mit Sicherheit gefunden und
beseitigt werden!
• Der Hersteller haftet nicht für Personen- oder Sachschä
den, die durch unsachgemäße
Installation, Bedienung oder Wartung, die nicht in dieser
Anleitung beschrieben sind, entstanden sind.
• Ändern und modizieren Sie das Produkt und dessen
Zubehör nicht.
• Ein anderer als in dieser Betriebsanleitung beschriebener
Einsatz ist unzulässig und
führt zu Gewährleistungsverlust, Garantieverlust und
Haftungsausschluss.
• Druckfehler und Änderungen an Gerät, Verpackung oder
Anleitung behalten wir uns vor.
• Achten Sie auf die Mont-
gereihenfolge in Kapitel 6.
• Lesen Sie Punkt 6.5 und
6.6.
• Achten Sie auf schlüssige
Kabelverbindungen.
• Trennen Sie das Gerät
sofort vom Netz!
Das Gerät ist überlastet.
Händler.
10 Technische Daten:
Eingangsspannung18-30 V DC
Ausgangsspannung12,5 V DC
6
Page 7
NetzsteckerKFZ-Stecker
max. Ausgangsstrom10 A Dauerbelastung
15 A Kurzzeitbelastung (max. 10 s)
max. Ausgangsleistung125 W Dauerbelastung
Maße158 x 82 x 51 mm (ohne Kabel)
Umgebungstemperatur0°C bis +40°C / RH 80%
Luftdruck86-104 kPa
Gewicht0,78 kg
12 Entsorgungshinweise:
Elektrische und elektronische Geräte dürfen nach
der europäischen WEEE-Richtlinie nicht mit dem
Hausmüll entsorgt werden. Deren Bestandteile
müssen getrennt der Wiederverwertung oder
Entsorgung zugeführt werden, weil giftige und
gefährliche Bestandteile bei unsachgemäßer Entsorgung die
Umwelt nachhaltig schädigen können.
Sie sind als Verbraucher nach dem Elektrogesetz (ElektroG)
verpichtet, elektrische und elektronische Geräte am Ende
ihrer Lebensdauer an den Hersteller, die Verkaufsstelle oder
an dafür eingerichtete, öffentliche Sammelstellen kostenlos
zurückzugeben. Einzelheiten dazu regelt das jeweilige
Landesrecht. Das Symbol auf dem Produkt, der Betriebsanleitung oder/und der Verpackung weist auf diese Bestimmungen hin. Mit dieser Art der Stofftrennung, Verwertung und
Entsorgung von Altgeräten leisten Sie einen wichtigen
Beitrag zum Schutz unserer Umwelt.
WEEE Richtlinie: 2002/96/EG
WEEE Nr.: 82898622
13 CE-Konformitätserklärung:
Dieses Produkt ist mit der nach der Richtlinie
2004/108/EG vorgeschriebenen Kennzeichnung
versehen: Mit dem CE Zeichen erklärt Goobay®,
eine registrierte Marke der Wentronic GmbH,
dass das Produkt die grundlegenden Anforderungen und
Richtlinien der europäischen Bestim-mungen erfüllt. Diese
können online auf www.goobay.de angefordert werden. Alle
Handelsmarken und registrierten Marken sind das Eigentum
ihrer jeweiligen Inhaber.
7
Page 8
User‘s Manual
SPW 24-12 10 A DC/DC 20365
ATTENTION! Read the user`s manual completely and
carefully. It is part of the pro duct and includes
important information for proper installation and use.
Keep this user‘s manual for clarication and only
pass it on together with the product.
Content: Page:
1 Safety Instructions 8
2 Description and Function 9
3 Intended Use 9
4 Scope of Delivery 10
5 Graphic Diagram 10
6 Operating 10
7 Care, Maintenance, Storage, and Transport 11
8 Troubleshooting 11
9 Warranty and Liability 12
10 Specications 12
11 Disposal Instructions 12
12 CE Declaration 13
1 Safety Instructions:
ATTENTION! Only skilled electricians may assemble
and disassemble the housing of the product. There
is a risk of electric shock and short circuit!
ATTENTION! Risk of re by short-circuit and
overheating!
Mind adequate ventilation and use re-resistant and
solid surfaces!
ATTENTION! Risk of short- circuit!
Never bridge contacts!
Do not put things into ventilation slots or ports!
ATTENTION! Risk of injury by stumbling!
Attend to safe cable installation!
• Your product is not a toy and is not meant for children,
because it contains small parts which can be swallowed
and injured when used inappropriately!
• Please install and store the product and its accessories in
a way persons cannot be injured, or objects not be
8
Page 9
damaged for example by dropping or stumbling.
• Please remove or store the packing materials well,
because children may cut themselves on them
while playing. Furthermore, there is a risk of swallowing
and inhalating of incidentals and insulating material.
• Also read the manual of your device, which is to be
charged or operated, like Notebook, Mobile Phone, etc.
for checking the compatibility and tting of the connec-
tors to the voltage converter, and the other way round.
• A defective device may not be put into operation, but
must be disconnected from mains and protected against
further use. Repairing, such as assembling and disas-
sembling the housing is only allowed to skilled professio-
nals. By repairing it yourself you will loose all warranties
and there is a risk of electric shock and short circuit.
• Drive the product only with a voltage of 24 V DC
vehicle power.
• Unplug all cables when not in use and during thunder
storms.
• Avoid places with high humidity, or places which might
come into contact with water.
• Do not place things on the device.
• Never expose the product to high mechanical pressure.
• Do not modify or change the product or its accessories!
Also mind chapter “warranty and liability“.
• Do not use damaged parts.
• The device may only be installed and used in dry interior
rooms.
• The device may growing warm during use.
• NEVER let the device unattended when in use!
2 Description and Function:
This product is a voltage converter for car use. The input
voltages within a range of 18-30 V DC are converted into an
output voltage of 12.5 V DC. So you can operate with several
12 V car accessories, like lamps or cooling boxes also in
trucks e.g. using 24 V. It is useable worldwide and can deliver
a maximum output power of 125 W.
Security features: stabilized, short-circuit safe
3 Intended Use:
Your product is made for charging and operating devices like
described in chapter 1. We do not permit using the product in
other ways. Use the product only in dry interior rooms.
Not attending to these regulations and safety instructions
might cause fatal accidents, injuries and damages to persons
and property.
9
Page 10
User‘s Manual
4 Scope of Delivery:
5 Graphic Diagram:
6 Operation:
The plug of the unit is 18-30 V DC voltage input terminal,
the central contact is the positive terminal and the side
ones are the negative terminals.
The socket of the unit is 12.5 V DC output terminal. The
central contact inside is the positive output terminal and
the side ones are the negative terminals..
- 1 x voltage converter
- 1 x user‘s manual
housing
cooling ns
DC output socket
12.5 V
DC input plug 18-30 V
10
1. Check the polarity of the input voltage and the power
consumption of your device to be driven. If the unit is
overloaded, the fuse can burn off.
2. Place the voltage converter to a re resistant and
horizontal surface.
3.. Insert the input DC plug of your voltage converter into a
18-30 V DC socket. Now a voltage of 12.5 V DC is
available on the output socket of the voltage converter.
4. Insert the 12 V DC mains plug of your car accessory
into the DC socket of the voltage converter. Attend to the
maximum output power of 125 W to avoid damages to
cables or unit.
5. If there‘s no output voltage despite right wiring, check the
input voltage for being a within the mentioned range.
Attend to the fact, that heat and coldness generating devices
perhaps have a too high power consumption for the voltage
converter.
Only trained professionals are allowed
to change the fuse.
Page 11
7 Maintenance, care, storage, and transport:
ATTENTION! Risk of re by short-circuit and
overheating!
Mind adequate ventilation and use re-resistant and
solid surfaces!
ATTENTION! Risk of short- circuit!
Never bridge contacts!
Do not put things into ventilation slots or ports!
ATTENTION! Risk of injury by stumbling!
Attend to safe cable installation!
• The device is maintenance-free.
• Always disconnect the mains plug from mains when not
in use!
• Use a dry linen cloth to clean your product. Be careful to
avoid scratches. Use a slightly moist cloth for heavy
stains. Look out for live cables! Do not use any cleaning
supplies: This can cause burns to the materials. Avoid
liquid entry to the device.
• Avoid places with high temperatures, humidity, or places
which can become wet, also during maintenance, care,
storage, and transport.
• Keep the product away from children and store it at dry
and dust-proof places!
• Keep the original packing for transport and to avoid
damages.
8 Troubleshooting:
ProblemHelp
The voltage converter does
not work.
incorrect smells,
hummings, etc.
other questions• Contact your dealer.
• Mind assembling in right
order - chapter 6.
• Read chapter 6.5 and 6.6
• Check all cable connec-
tions for proper tting.
• Disconnect the unit from
mains (12 V DC)!
The unit is overloaded.
11
Page 12
User‘s Manual
9 Warranty and Liability:
• The producer grants a 2 years warranty to a new device.
• As the manufacturer has no inuence on installation,
warranty only applies to the product itself.
• If any fault or damage is detected on your device, please
contact your dealer and provide your sales slip or invoice
as evidence of the purchase, if necessary. Your dealer will
repair the fault either on site, or send the device to the
manufacturer. You make the work of our technicians
considerably easier, describing possible faults in detail
– only then you can be assured that faults, occurring only
rarely, will be found and repaired with certainty!
• The manufacturer is not liable for damages to persons or
property caused by improper installation, operation or
maintenance, not described in this manual.
• Do not alter or modify the product or its accessories.
• Any use other than described in this user`s manual is not
permitted and causes loss of warranty, loss of guarantee,
and non-liability.
• We reserve our right for misprints and changes of the
device, packing, or user`s manual.
10 Specications:
Input voltage18-30 V DC
Output voltage12 V DC car plug
Mains plugDC car plug
Max. output current10 A permanent load
15 A short-time load (max. 10 s)
Max. output power125 W permanent load
Dimensions158 x 82 x 51 mm (without cable)
Surrounding temperatur0°C bis +40°C / RH 80%
Air pressure86-104 kPa
Weight0.78 kg
12
11 Disposal Instructions:
According to the European WEEE directive,
electrical and electronic equipment must not be
disposed with consumers waste. Its components
must be recycled or disposed apart from each
other. Otherwise contaminative and hazardous
substances can pollute our environment.
You as a consumer are committed by law to dispose
electrical and electronic devices to the producer, the dealer,
or public collecting points at the end of the devices lifetime
Page 13
for free. Particulars are regulated in national right. The
symbol on the product, in the user`s manual, or at the
packaging alludes to these terms. With this kind of waste
separation, application, and waste disposal of used devices
you achieve an important share to environmental protection.
WEEE Directive: 2002/96/EC
WEEE No: 82898622
12 CE Declaration:
This device corresponds to EU directive
2004/108/EC: With the CE sign Goobay®, a
registered trademark of the Wentronic GmbH ensures, that the product is conformed to the basic standards
and directives. These standards can be requested online on
www.goobay.de. All trademarks and registered brands are
the property of their respective owners.
13
Page 14
User‘s Manual
14
Page 15
15
Page 16
Revision Date 2011-08-17
Version 1
Goobay®
Pillmannstraße 12
38112 Braunschweig
Germany
www.goobay.de
Made in China
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.