AVS 46 HDMITM UMSCHALTER 2IN/1OUT Modell: 60818
AVS 47 HDMITM UMSCHALTER 3IN/1OUT Modell: 60819
AVS 46 HDMITM Switcher 2in/1out Model: 60818
AVS 47 HDMITM Switcher 3in/1out Model: 60819
Manual
Manual
AVS 46 HDMITM SWITCHER 2IN/1OUT
Model: 60818
AVS 47 HDMITM SWITCHER 2IN/1OUT
Model: 60819
ATTENTION! Please read the user manualcompletely and carefully. It is part of the
product and includes important information for proper installation and use. Keep
this guide to have it available, when there are uncertainties, or the product will be
passed on.
Contents: Page:
1 Description and Function 8
2 Intended Use 8
3 Notes on Safety 9
4 Parts Package 9
5 Operating 10
5.1 Introduction 10
5.2 Connecting 10
5.3 Intelligent switching function 10
5.4 Manual switching function 11
6 Care, Maintenance, Storage, and Transport 11
7 Troubleshooting 11
8 Specications 12
9 Warranty and Liability 12
10 General Note 12
11 Note on Waste Disposal 13
12 CE Declaration 13
1 Description and Function:
Enlarge your Home Entertainment System with the AVS 46/47 HDMITM switcher. The
AVS switchers enable you to connect 2 or 3 source devices to one LCD/Plasma
TV, screen or video projector, depending on your model.
Source Devices: sources like Receiver, DVD-Player, Blue Ray-Player, PCs, etc.
Output Devices: drains like monitors, video projectors, TVs, etc.
2 Intended Use:
Your switcher is provided for audio-/video use only. It is not allowed to use
the device in other ways than described in chapter “Description and
Function”. Use this device only in dry interior rooms. The symbol with the
house reminds you of that. If you do not attend to these regulations and notes on safety,
it might causes fatal accidents, injuries and damages to persons and property.
8
3 Notes on Safety:
ATTENTION! Only skilled electricians may assemble and disassemble the
housing of the product. There is a risk of electric shock and short circuit!
• Your product is not a toy and is not meant for children, because it contains small parts
which can be swallowed and can injure when used inappropriately!
• Please install the system and devices attached to it in a way that persons cannot be
injured, or objects not be damaged for example by dropping or stumbling.
• Please remove the packing materials, because children may cut themselves on them
while playing. Furthermore, there is a risk of swallowing and inhalation of incidentals and
insulating material.
• Avoid places with high temperatures, or humidity, or places which might come into
contact with water.
• Do not install the product close to openings of air conditioners, or at places with an
excessive amount of dust or smoke.
• Do not install the product at places subject to vibration, or oscillation.
• Do not modify and alter the product and any accessories! Make sure you also read the
Chapter “Warranty and Liability”. Do not use any damaged parts.
• Keep enough space around all devices for a good ventlation and free motion and to
avoid damages.
• Plug and unplug all cables slowly and carefully.
• During transport, observe the details listed in the Chapter “Specications”, and imple-
ment measures suitable for transport, e.g. use the original package.
• For questions, defects, mechanical damages, malfunctions, and other functional
problems which cannot be resolved by this guide, please contact your dealer for repair or
replacement, as described in the Chapter “Warranty and Liability”.
• Mind chapter “Specications“.
• Please also observe the terms of use described in the Chapter “Intended Use”.
4 Parts Package:
- 1 pc AVS 46 or 47
- 1 pc manual
9
Manual
5 Operating Elements:
5.1 Introduction:
The HDMITM switcher can be switched by using the SELECT button or by using the
automatic and intelligent switching function. The HD signals of the source devices are to
be transmitted to an output device. Plug in the source devices to the INPUTS 1 and 2 or
1, 2 and 3. A red Power LED shows the product is ready to use.
5.2 Connecting:
- Connect the input of the output device to the output plug of the switcher.
- Connct the outputs of the source devices to the INPUTS of the switcher.
1. Connect the source devices and the output device like described in the pictures.
2. Press the SELECT button to select the preferred channel.
AVS 46:
AVS 47:
10
5.3 Intelligent switching function:
1. When connecting a source device to the switcher or switching on an already connected
source device, the switcher changes to this channel automatically and selects the new
device in that way. The selected channel will be shown by the corresponding LED.
2. When switching off or disconnecting a source device, the switcher automatically
changes to the next connected source device in order 1-2-(3).
In case of switching a source device into stand-by mode, the switcher is not able
NOTE:
to use the intelligent switching function. That‘s why switch off the source device
completely or disconnect it from mains.
5.4 Manual switching function:
Also adjust the switcher manually by using the SELECT button for selecting the preferred
channel. The channels change in order of 1,2,(3). The selected channel is signalized by the
corresponding LED.
6 Care, Maintenance, Storage, and Transport:
ATTENTION! There is a risk of electric shock and short circuit!
• The product is maintenance free.
• Use a dry linen cloth to clean your product, or use a slightly moist cloth for heavy stains.
Look out for live cables of your device during cleaning!
• Attend avoiding risks of stumbling by installing the cables.
• Avoid places with high temperatures, humidity, or places which can become wet, also
during care, maintenance, storage, and transport.
• Follow the safety symbols on the packing during transport.
7 Troubleshooting:
Problem Action
No picture - Make sure, all connections to source devices and output device
are properly plugged in by HDMITM cables.
- Check if all devices are connected with a power cable and if they
are switched on.
- Check all connections and cables for damages.
Pictures without
tone
Resolution does not
reach 1080p.
- Mind conclusive connections of the cables.
- Check, if the used cable only can transmit pictures like DVI
cables. By using a DVI to HDMI
transmitted, too.
- Make sure that the source devices (e.g. DVD Player) and output
device (e.g. a TV) support a resolution of 1080p.
- Also check your HDMI cables, supporting 1080p.
TM
adaptor only pictures are
11
Manual
8 Specications:
Model AVS 46 AVS 47
Input signal DDC 5 V DC (TTL) 5 V DC (TTL)
Temperature range 0°C - 70°C 0°C - 70°C
Power consumption 5 W 5 W
Inputs
Outputs
Weight in g 80 95
Measurements in mm 60 x 16 x 640 81 x 16 x 600
Resolution/color depth up to 1080p, Full HD/12-Bit up to 1080p, Full HD/12-Bit
Pulse frequency up to 250 MHz up to 250 MHz
Housing plastic plastic
Sockets
Max. cable length 10.0m without amplication 10.0m without amplic ation
Suppor ted formats HD Dolby
TM
HDMI
Standard High Speed HDMITM High Speed HDMI
2 pcs. HD MI
1 pc. HDM I
19 PIN HDMI
HDCP 2.0 copy protection HDCP 2.0 copy protec tion
TM
sockets 3 pcs. HD MITM sockets
TM
socket 1 pc. HDM ITM socket
TM
gold plated 19 PIN HDMITM gold plated
®
, True HD, HD Dolby®, True HD,
9 Warranty and Liability:
TM
12
• The producer grants a 2 years guarantee to a new device.
• As the manufacturer has no inuence on installation, warranty of the product only
applies to the product.
• If any fault or damage is detected on your device, please contact your dealer and provide
your sales slip or invoice as evidence of the purchase, if necessary. Your dealer will
repair the fault either on site, or send the device to the manufacturer. You make the work
of our technicians considerably easier, when you describe possible faults in detail – only
then you can be assured that faults occurring only rarely will be found and repaired with
certainty!
• If your dealer cannot be contacted, you can also contact us directly.
• The manufacturer is not liable for damages to persons or property caused by improper
installation or operation not described in this guide. This includes, among others, any
alteration and modication of the product and its accessories.
• Any use other than described in this user‘s guide is not permitted, and causes loss of
warranty, loss of guarantee, and non-liability.
• We reserve our right for misprints and changes of the device, packing, or user‘s guide.
10 General Notes:
• HDMI, the HDMI Logo and High-Denition-Multimedia-Interface are registered brands or
trademarks of the HDMI Licencing LLC.
• All Brands and trademarks are the property of their respective owners.
• The AVS 46/47 includes HDMITM technology.
• PS3 is a brand label of Sony Computer Entertainment Inc.
11 Note on Waste Disposal:
In according to the European WEEE directive, electrical and electronic equipment
must not be disposed with consumers waste. The consumer is committed by law
to reposit electrical and electronic devices to public collecting points or to the
dealer at the end of the devices lifetime for free. Particulars are regulated in
national right. The symbol on the product, in the manual or at the packaging
alludes to these terms. With this kind of application of used devices you achieve an
important share to environmental protection.
12 CE-Declaration:
This device corresponds to EU directives 2004/108/EG: With the CE sign the
Goobay® , a registered trademark of the Wentronic GmbH ensures, that the
product is conformed to the basic standards and directives. These standards
can be requested online on www.wentronic.com. The mentioned directives
replace all former national permissions in the European Union. All trademarks and registered brands are the property of their respective owners.
13
Manual
14
15
Revision Date 2011-02-03
Version 2
®
is a registered
Goobay
trademark of Wentronic GmbH
in Germany and/or other countries.
Wentronic GmbH
Pillmannstraße 12
38112 Braunschweig, Germany
Designed and Developed in Germany.
Assembled in China
Loading...