This drawing shows the location(s) of the warning
decal(s). If a decal is missing or illegible, see
the front cover of this manual and request a
free replacement decal. Apply the decal in the
location shown. Note: The decal(s) may not be
shown at actual size.
GOLD'S GYM is a registered trademark of Gold's Gym International, Inc. This product is manufactured and
distributed under license from Gold's Gym International, Inc.
2
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your weight bench before using your weight bench.
ICON assumes no responsibility for personal injury or property damage sustained by or through the
se of this product.
u
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or persons with pre-existing health problems.
2. Read all instructions in this manual and all
warnings on the weight bench before using
the weight bench.
3. It is the responsibility of the owner to ensure
that all users of the weight bench are adequately informed of all precautions.
4. The weight bench is intended for home use
only. Do not use the weight bench in any
commercial, rental, or institutional setting.
5. Keep the weight bench indoors, away from
moisture and dust. Place the weight bench
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around the weight
bench to mount, dismount, and use the
weight bench.
6. Keep children under age 12 and pets away
from the weight bench at all times.
7. Inspect and properly tighten all parts regularly. Replace any worn parts immediately.
8. Keep hands and feet away from moving
parts.
9. Always wear athletic shoes for foot protection while using the weight bench.
11. The weight bench is designed to support a
maximum user weight of 250 lbs. (113 kg)
and a maximum total weight of 360 lbs. (163
kg). Do not place more than 110 lbs. (50 kg),
including a barbell and weights, on the
weight rests. Do not place more than 50 lbs.
(23 kg) on the leg lever.
12. Always make sure that there is an equal
amount of weight on each side of your barbell while you are using it. Always keep
some weight on both ends of the barbell
while adding or removing weights to prevent
the barbell from tipping.
13. When you are using the leg lever, place a
barbell with the same amount of weight on
the weight rests to balance the weight
bench.
14. Always exercise with a partner. When you
are performing bench press exercises, your
partner should stand behind you to catch
the barbell if you cannot complete a repetition.
15. When using the backrest in the level position or an inclined position, make sure that
the backrest support is inserted completely
through both uprights, and that the backrest
support is turned to the locked position.
16. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
10. Do not use a barbell that is longer than 6 ft.
(1.8 m) with the weight bench. Note: The
weight bench does not include a barbell or
weights.
3
BEFORE YOU BEGIN
Thank you for selecting the new GOLDʼS GYM®XR
7.9 weight bench. The XR 7.9 weight bench offers a
selection of exercises designed to develop the major
uscle groups of the body. Whether your goal is to
m
tone your body, build dramatic muscle size and
trength, or improve your cardiovascular system, the
s
weight bench will help you to achieve the specific
results you want.
For your benefit, read this manual carefully before
using the weight bench. If you have questions after
ASSEMBLED DIMENSIONS:
Height: 3 ft. 11 in. (119 cm)
Width: 2 ft. 6 in. (76 cm)
Depth: 5 ft. 2 in. (157 cm)
reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
odel number and the location of the serial number
m
decal are shown on the front cover of this manual.
Before reading further, please look at the drawing
below and familiarize yourself with the parts that are
labeled.
Backrest
Weight Rest
Upright
Curl Pad
Leg Lever
Weight Tube
Backrest Support
Seat
Curl Knob
4
M8 x 45mm Bolt (28)
M6 Washer (22)
M10 x 135mm Bolt (23)
M10 x 60mm Bolt (25)
M10 x 35mm
Carriage Bolt (37)
M6 x 16mm
Screw (24)
M6 x 40mm Screw (32)
M8 Locknut
(38)
M10 Locknut (31)
M8 Washer (39)
M10 Washer (30)
M10 x 68mm Bolt (41)
M10 x 65mm Bolt (27)
PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST near the end of this manual. IMPORTANT: If you cannot
find a part in the hardware kit, check to see if it has been preassembled. To avoid damaging plastic
arts, do not use power tools for assembly.
p
5
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.