Gold Medal Products 5300 Operators Manual

Door Decal

)

Apply Glass

Cleaner

Nacho Cheese Dispenser Model No. 5300

Decal Installation

Decal Installation Instructions

Follow the instructions below to install decals packed separately for a Nacho Cheese Dispenser
(if applicable). Unit must be off, unplugged, and allowed to cool before attempting installation.
General images are shown for reference purposes only (decals may vary by unit).

Items Needed for Installation:

• Set of Decals - for door, right and left panels, rear panel, and bottom panel (if applicable).

• Gold Medal Watchdog Glass Cleaner (Item No. 2588) or a non-ammonia type glass cleaner.

• Plastic squeegee, medium size applicator (type used for Bondo

®

filler).

Decal Location

(PN 36054)

(precut for button)

Bottom Panel Decal

(PN 36053 - if supplied)

Decal Installation

For best results, check decal alignment often
during installation.

Thermometer

Right Housing
Decal (PN 36052)

Left Housing
Decal (PN 36051

(precut for
thermometer)

Rear Panel
Decal (PN 36055)

Step 1: Hold decal up to mounting surface to

determine decal placement.

Step 2: Apply glass cleaner to “wet” the surface
where decal is to be placed (Figure A). Do not
wipe the glass cleaner off.

Page 7

(DO NOT wipe off)

Figure A

gmpopcorn.com

Door Decal

)

Apply Glass

Cleaner

Nacho Cheese Dispenser Model No. 5300

Decal Installation

Decal Installation Instructions

Follow the instructions below to install decals packed separately for a Nacho Cheese Dispenser
(if applicable). Unit must be off, unplugged, and allowed to cool before attempting installation.
General images are shown for reference purposes only (decals may vary by unit).

Items Needed for Installation:

• Set of Decals - for door, right and left panels, rear panel, and bottom panel (if applicable).

• Gold Medal Watchdog Glass Cleaner (Item No. 2588) or a non-ammonia type glass cleaner.

• Plastic squeegee, medium size applicator (type used for Bondo

®

filler).

Decal Location

(PN 36054)

(precut for button)

Bottom Panel Decal

(PN 36053 - if supplied)

Decal Installation

For best results, check decal alignment often
during installation.

Thermometer

Right Housing
Decal (PN 36052)

Left Housing
Decal (PN 36051

(precut for
thermometer)

Rear Panel
Decal (PN 36055)

Step 1: Hold decal up to mounting surface to

determine decal placement.

Step 2: Apply glass cleaner to “wet” the surface
where decal is to be placed (Figure A). Do not
wipe the glass cleaner off.

Page 7

(DO NOT wipe off)

Figure A

gmpopcorn.com

Door Decal

)

Apply Glass

Cleaner

Nacho Cheese Dispenser Model No. 5300

Decal Installation

Decal Installation Instructions

Follow the instructions below to install decals packed separately for a Nacho Cheese Dispenser
(if applicable). Unit must be off, unplugged, and allowed to cool before attempting installation.
General images are shown for reference purposes only (decals may vary by unit).

Items Needed for Installation:

• Set of Decals - for door, right and left panels, rear panel, and bottom panel (if applicable).

• Gold Medal Watchdog Glass Cleaner (Item No. 2588) or a non-ammonia type glass cleaner.

• Plastic squeegee, medium size applicator (type used for Bondo

®

filler).

Decal Location

(PN 36054)

(precut for button)

Bottom Panel Decal

(PN 36053 - if supplied)

Decal Installation

For best results, check decal alignment often
during installation.

Thermometer

Right Housing
Decal (PN 36052)

Left Housing
Decal (PN 36051

(precut for
thermometer)

Rear Panel
Decal (PN 36055)

Step 1: Hold decal up to mounting surface to

determine decal placement.

Step 2: Apply glass cleaner to “wet” the surface
where decal is to be placed (Figure A). Do not
wipe the glass cleaner off.

Page 7

(DO NOT wipe off)

Figure A

gmpopcorn.com

Door Decal

)

Apply Glass

Cleaner

Nacho Cheese Dispenser Model No. 5300

Decal Installation

Decal Installation Instructions

Follow the instructions below to install decals packed separately for a Nacho Cheese Dispenser
(if applicable). Unit must be off, unplugged, and allowed to cool before attempting installation.
General images are shown for reference purposes only (decals may vary by unit).

Items Needed for Installation:

• Set of Decals - for door, right and left panels, rear panel, and bottom panel (if applicable).

• Gold Medal Watchdog Glass Cleaner (Item No. 2588) or a non-ammonia type glass cleaner.

• Plastic squeegee, medium size applicator (type used for Bondo

®

filler).

Decal Location

(PN 36054)

(precut for button)

Bottom Panel Decal

(PN 36053 - if supplied)

Decal Installation

For best results, check decal alignment often
during installation.

Thermometer

Right Housing
Decal (PN 36052)

Left Housing
Decal (PN 36051

(precut for
thermometer)

Rear Panel
Decal (PN 36055)

Step 1: Hold decal up to mounting surface to

determine decal placement.

Step 2: Apply glass cleaner to “wet” the surface
where decal is to be placed (Figure A). Do not
wipe the glass cleaner off.

Page 7

(DO NOT wipe off)

Figure A

gmpopcorn.com

Door Decal

)

Apply Glass

Cleaner

Nacho Cheese Dispenser Model No. 5300

Decal Installation

Decal Installation Instructions

Follow the instructions below to install decals packed separately for a Nacho Cheese Dispenser
(if applicable). Unit must be off, unplugged, and allowed to cool before attempting installation.
General images are shown for reference purposes only (decals may vary by unit).

Items Needed for Installation:

• Set of Decals - for door, right and left panels, rear panel, and bottom panel (if applicable).

• Gold Medal Watchdog Glass Cleaner (Item No. 2588) or a non-ammonia type glass cleaner.

• Plastic squeegee, medium size applicator (type used for Bondo

®

filler).

Decal Location

(PN 36054)

(precut for button)

Bottom Panel Decal

(PN 36053 - if supplied)

Decal Installation

For best results, check decal alignment often
during installation.

Thermometer

Right Housing
Decal (PN 36052)

Left Housing
Decal (PN 36051

(precut for
thermometer)

Rear Panel
Decal (PN 36055)

Step 1: Hold decal up to mounting surface to

determine decal placement.

Step 2: Apply glass cleaner to “wet” the surface
where decal is to be placed (Figure A). Do not
wipe the glass cleaner off.

Page 7

(DO NOT wipe off)

Figure A

gmpopcorn.com

Pull ring to remove

Bag Support Tray

bag of

Basket Liner

Upper Cheese

Bag Tray

to remove

Step 2:

The dispenser

Nacho Cheese Dispenser Model No. 5300

Product Installation and Removal

The dispenser is equipped with a Bag Support Tray to hold the bag of cheese in use, and an upper
Cheese Bag Tray to hold a bag of cheese for pre-warming.

Add a Basket Liner (PN 100557) to each Bag Support Tray opening to provide cushion/support for
a product bag with the small cap. Follow instructions below to install the liner and insert product.

Basket Liner Installation

(for prewarming)

(holds

cheese in use)

Step 1. Open the cabinet door and locate the
Bag Support Tray. Caution: Tray may be hot
when adding or changing the product.

Product Installation

Pull ring

in position

Inside view of Bag Support Tray

Step 2. Position the Basket Liner in bag
support opening as shown.

Step 1:

fitting cover from a
preheated product bag.
Use a new dispenser tube
(PN 5285) for each bag.

Dispenser Tube

tube will pierce the inner
seal of the bag when
installed. Make sure the
cap is securely threaded
onto the bag fitting.
Caution: Product may be hot.

Page 11

Tube Clamp Cam

Step 3: Open the front door of the

dispenser. Open the tube clamp by
turning the cam counterclockwise.

gmpopcorn.com

3

6* 5*

15 14

Nacho Cheese Dispenser Model No. 5300

Cabinet Front and Interior View

1

2

5300

4

General images shown for parts reference only.

Item

1 CHEESE BAG TRAY EN0008
2 CHEESE BAG SUPPORT 36027
3 SWITCH MOUNT PANEL 36029
4 DOOR MAGNET 36042
5 YELLOW BUTTON 36033YL
6 RED BUTTON 36033RD
7 ORANGE BUTTON 36033OR
8 SLIDING PUMP BLOCK 36031

9 PUMP CAM LOCK 36032
10 CAM M5 SLOTTED SCREW 77125
11 PUMP MOUNT THUMB SCREW 77122
12 M3-WASHER-SPRING 77130
13 PUMP HEAD ASSY 5 ROLLER 36105
14 PUMP BLOCK RIGHT-SWITCH 36030
15 SWITCH 36038

Part Description

8

9

10

7

11, 12

Pump Block – Detail View

Part Number

5300

13

Page 19

gmpopcorn.com

3

6* 5*

15 14

Nacho Cheese Dispenser Model No. 5300

Cabinet Front and Interior View

1

2

5300

4

General images shown for parts reference only.

Item

1 CHEESE BAG TRAY EN0008

2 CHEESE BAG SUPPORT 36027

3 SWITCH MOUNT PANEL 36029

4 DOOR MAGNET 36042

5 YELLOW BUTTON 36033YL

6 RED BUTTON 36033RD

7 ORANGE BUTTON 36033OR

8 SLIDING PUMP BLOCK 36031

9 PUMP CAM LOCK 36032
10 CAM M5 SLOTTED SCREW 77125
11 PUMP MOUNT THUMB SCREW 77122
12 M3-WASHER-SPRING 77130
13 PUMP HEAD ASSY 5 ROLLER 36105
14 PUMP BLOCK RIGHT-SWITCH 36030
15 SWITCH 36038

Part Description

8

9

10

7

11, 12

Pump Block – Detail View

Part Number

5300

13

Page 19

gmpopcorn.com

3

6* 5*

15 14

Nacho Cheese Dispenser Model No. 5300

Cabinet Front and Interior View

1

2

5300

4

General images shown for parts reference only.

Item

1 CHEESE BAG TRAY EN0008

2 CHEESE BAG SUPPORT 36027

3 SWITCH MOUNT PANEL 36029

4 DOOR MAGNET 36042

5 YELLOW BUTTON 36033YL

6 RED BUTTON 36033RD

7 ORANGE BUTTON 36033OR

8 SLIDING PUMP BLOCK 36031

9 PUMP CAM LOCK 36032
10 CAM M5 SLOTTED SCREW 77125
11 PUMP MOUNT THUMB SCREW 77122
12 M3-WASHER-SPRING 77130
13 PUMP HEAD ASSY 5 ROLLER 36105
14 PUMP BLOCK RIGHT-SWITCH 36030
15 SWITCH 36038

Part Description

8

9

10

7

11, 12

Pump Block – Detail View

Part Number

5300

13

Page 19

gmpopcorn.com