Gold Medal Products 3052 User Manual
Aluminum Floss Pan
Whirlgrip Floss Stabilizer
Power Cord
Cotton Candy Cone Samples
Instruction
Registration
Auto Breeze Model No. 3052-00-000
INSTALLATION INSTRUCTIONS
Inspection of Shipment
After unpacking (reference unit Quick Start Guide), check thoroughly for any damage which may
have occurred in transit. Claims should be filed immediately with the transportation company.
The warranty does not cover damage that occurs in transit, or damage caused by abuse, or
consequential damage due to the operation of this machine, since it is beyond our control
(reference warranty in back of manual).
Manual
Read and understand the operator’s manual and all other safety instructions before using this
equipment. To order copies of the operator’s manual go to gmpopcorn.com or write to Gold
Medal Products Co., 10700 Medallion Drive, Cincinnati, OH 45241 USA 1-(800)-543-0862.
Model Description
3052-00-000: Auto Breeze cotton candy machine with aluminum floss pan.
Items Included with this Unit
(PN 3010)
Manual
Warranty Card
(PN 42040)
(PN 3021M/case of 1000)
Page 4
gmpopcorn.com
Step 1:
Place Whirl Clips
Step 2:
Hang Stabilizer on top,
up facing hook. Screening should
Step 3:
Gently pull screening
Step 4:
Repeat for all clips
keeping equal spacing around pan
(number of clips varies by model)
.
Allow
a
ir space
for
Auto Breeze Model No. 3052-00-000
Whirlgrip Floss Stabilizer
Installation Instructions
Unit must be OFF, and cool to install Floss Stabilizer. Place Floss Pan on unit and install Whirl
Grip Floss Stabilizer (Item No. 3010) as shown below. Kit includes: Floss Stabilizer/screening
(P/N 43032), and (6) Whirlgrip Clips (P/N 77470). Clips are designed to provide air space
between screening and floss pan.
over rim of pan with hooks
facing inside.
Allow air space between pan and screening for proper operation.
be about flush with top of pan.
proper operation.
down and attach to bottom,
down facing hook.
Top View of Floss Pan
Page 6
gmpopcorn.com
Step 1:
Place Whirl Clips
Step 2:
Hang Stabilizer on top,
up facing hook. Screening should
Step 3:
Gently pull screening
Step 4:
Repeat for all clips
keeping equal spacing around pan
(number of clips varies by model)
.
Allow
a
ir space
for
Auto Breeze Model No. 3052-00-000
Whirlgrip Floss Stabilizer
Installation Instructions
Unit must be OFF, and cool to install Floss Stabilizer. Place Floss Pan on unit and install Whirl
Grip Floss Stabilizer (Item No. 3010) as shown below. Kit includes: Floss Stabilizer/screening
(P/N 43032), and (6) Whirlgrip Clips (P/N 77470). Clips are designed to provide air space
between screening and floss pan.
over rim of pan with hooks
facing inside.
Allow air space between pan and screening for proper operation.
be about flush with top of pan.
proper operation.
down and attach to bottom,
down facing hook.
Top View of Floss Pan
Page 6
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5 BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7
THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14 5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18
5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25 TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
3052
-00-000
SPINNER HEAD, TUBULAR 5IN
HEAD (Complete
BRUSH HOLDER ASSY
(includes Brushes, Caps
3 BELL HOUSING, DUAL BRUSH
42190
4
LABEL,FLOSS ADVERTISEMENT
42159
5
BOWL,
SEAL RETAINER
56561
6 BELL HOUSING SEAL
56571
7 THREADED BUMPER,1/4
-20
102017
8
NAME,INSTRUCTION OVERLAY
102028
9
SWITCH, LIGHTED ROCKER GR
42798
10
PILOT LIGHT, AMBER 125V
55039
11
SWITCH, ROCKER DPDT
48615
12
RUBBER FOOT 3/4IN HIGH
47155
13
LOCK N GO HANDLE,
NEW CAB
. 56563
14
5/16-18 X 1/2 PH TR M/S
12183
15
WASHER SS .5 ID X 1.10 OD
48428
16
CLAMPING SHAFT, LOCK
N GO
56565
17 CLAMPING CAM
42460
18 5/16 FLAT WASHER ZINC PLT
74134
19
HEX NUT 5/16
-
18 ESLOK
12001
20* POWER
SUPPLY CORD
22038
21
STRAIN RELIEF SR
-
6P3-4 76026
22
WARNING LABEL CORD
68720
23 8-
32 X 3/8 PHIL PAN
HEAD
87515
24
1/4-20 X 3/4 GRADE 5 BOLT (w/Lock Washer)
74520
25
TINNERMAN NUT 1/4
-20
42125
26 8-
32 X 3/8 SLT. HWH M/S
42044
27 #8-
32 TINNERMAN FASTENER
47299
28 INSPECTION
BRUSH COVER
42381
29
LABEL,CLEAN EVERY 500 LBS
42002
Auto Breeze Model No. 3052-00-000
Cabinet Exterior and Lock-N-Go Handle Assembly – Parts List
Item
1
Assembly) See Spinner Head Assembly section
for individual parts breakdown.
2
and Holders) See Brush Assembly Breakdown
section for individual parts breakdown.
Part Description
Part No.
55139
42382W
Page 22
gmpopcorn.com
Loading...