Page 1
up facing hook. Screening should
for
Tornado 200 Model No. 3005EMS, 3005XEM
Whirlgrip Floss Stabilizer
Installation Instructions
Unit must be OFF, and cool to install Floss Stabilizer. Place Floss Pan on unit and install Whirl
Grip Floss Stabilizer (Item No. 3010) as shown below. Kit includes: Floss Stabilizer/screening
(P/N 43032), and (6) Whirlgrip Clips (P/N 77470). Clips are designed to provide air space
between screening and floss pan.
Step 1: Place Whirl Clips
over rim of pan with hooks
facing inside.
Step 4: Repeat for all clips keeping equal spacing around pan (number of clips varies by model).
Allow air space between pan and screening for proper operation.
Step 2: Hang Stabilizer on top,
be about flush with top of pan.
Allow air space
proper operation.
Top View of Floss Pan
Step 3: Gently pull screening
down and attach to bottom,
down facing hook.
Page 5
gmpopcorn.com
Page 2
up facing hook. Screening should
for
Tornado 200 Model No. 3005EMS, 3005XEM
Whirlgrip Floss Stabilizer
Installation Instructions
Unit must be OFF, and cool to install Floss Stabilizer. Place Floss Pan on unit and install Whirl
Grip Floss Stabilizer (Item No. 3010) as shown below. Kit includes: Floss Stabilizer/screening
(P/N 43032), and (6) Whirlgrip Clips (P/N 77470). Clips are designed to provide air space
between screening and floss pan.
Step 1: Place Whirl Clips
over rim of pan with hooks
facing inside.
Step 4: Repeat for all clips keeping equal spacing around pan (number of clips varies by model).
Allow air space between pan and screening for proper operation.
Step 2: Hang Stabilizer on top,
be about flush with top of pan.
Allow air space
proper operation.
Top View of Floss Pan
Step 3: Gently pull screening
down and attach to bottom,
down facing hook.
Page 5
gmpopcorn.com
Page 3
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 4
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 5
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 6
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 7
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 8
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 9
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 10
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 11
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 12
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 13
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 14
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 15
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 16
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 17
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 18
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 19
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 20
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 21
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 22
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 23
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 24
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 25
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 26
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 27
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 28
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 29
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 30
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 31
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 32
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 33
10 POWER SUPPLY CORD
1
89216
42369
CAUTION: If supply cord
16
8
Tornado 200 Model No. 3005EMS, 3005XEM
Exterior View
1
2
15
3
13, 14
12
11
4
5
17
18
10*
9
*
is damaged, it must be
replaced by Gold Medal
Products Co., its service
agent, or similarly
7
6
5
qualified persons in
order to avoid a hazard.
Item
1 7 IN SPINNER HEAD COMPLETE 1 55265 55265
2 BRUSH COVER 2 42008NM 42008NM
3 MOTOR CASTING 1 42034 42034
4 PAN SUPPORT 4 42049 42049
5 RUBBER FEET 3/4IN HIGH 8 47155 47155
6 NAME & INSTRUCTION OVERLAY 1 55262 55262
7 CIRCUIT BREAKER 15AMP 1 47364
8 HANDLE 1 67069 67069
9 STRAIN RELIEF SR-7W-2 1 67060 67060
11 RUBBER PAD (under Support Angle) 4 75243 75243
12 SUPPORT ANGLE, SHIPPING 4 48019 48019
13 1/4-20 X 1 HHC GR2 ZINC 4 41903 41903
14 MED SPLIT LOCK WASHER 1/4 4 74526 74526
15 5/16 ACORN NUT 4 77610 77610
16 5/16 WASHER 8 74134 74134
17 SUSPENSION SPRING 4 20006 20006
18 5/16 FLANGE NUT 4 49317 49317
Part Description Qty.
Part Number
3005EMS 3005XEM
Page 18
gmpopcorn.com
Page 34
3 BEZEL, POWER DISPLAY
1
55435
55435
5
Tornado 200 Model No. 3005EMS, 3005XEM
Front Panel
1
Item
1 SWITCH, LIGHTED ROCKER GR 2 42798 42798
2 ROCKER SWITCH COVER 2 48786 48786
2
Part Description Qty.
3
4
Part Number
3005EMS 3005XEM
4 COVER, DIGITAL METER 1 48756 48756
5 KNOB, PAKTRONIC CONTROL 1 40793 40793
Page 19
gmpopcorn.com
Page 35
3 BEZEL, POWER DISPLAY
1
55435
55435
5
Tornado 200 Model No. 3005EMS, 3005XEM
Front Panel
1
Item
1 SWITCH, LIGHTED ROCKER GR 2 42798 42798
2 ROCKER SWITCH COVER 2 48786 48786
2
Part Description Qty.
3
4
Part Number
3005EMS 3005XEM
4 COVER, DIGITAL METER 1 48756 48756
5 KNOB, PAKTRONIC CONTROL 1 40793 40793
Page 19
gmpopcorn.com
Page 36
3 BEZEL, POWER DISPLAY
1
55435
55435
5
Tornado 200 Model No. 3005EMS, 3005XEM
Front Panel
1
Item
1 SWITCH, LIGHTED ROCKER GR 2 42798 42798
2 ROCKER SWITCH COVER 2 48786 48786
2
Part Description Qty.
3
4
Part Number
3005EMS 3005XEM
4 COVER, DIGITAL METER 1 48756 48756
5 KNOB, PAKTRONIC CONTROL 1 40793 40793
Page 19
gmpopcorn.com
Page 37
3 BEZEL, POWER DISPLAY
1
55435
55435
5
Tornado 200 Model No. 3005EMS, 3005XEM
Front Panel
1
Item
1 SWITCH, LIGHTED ROCKER GR 2 42798 42798
2 ROCKER SWITCH COVER 2 48786 48786
2
Part Description Qty.
3
4
Part Number
3005EMS 3005XEM
4 COVER, DIGITAL METER 1 48756 48756
5 KNOB, PAKTRONIC CONTROL 1 40793 40793
Page 19
gmpopcorn.com
Page 38
3 BEZEL, POWER DISPLAY
1
55435
55435
5
Tornado 200 Model No. 3005EMS, 3005XEM
Front Panel
1
Item
1 SWITCH, LIGHTED ROCKER GR 2 42798 42798
2 ROCKER SWITCH COVER 2 48786 48786
2
Part Description Qty.
3
4
Part Number
3005EMS 3005XEM
4 COVER, DIGITAL METER 1 48756 48756
5 KNOB, PAKTRONIC CONTROL 1 40793 40793
Page 19
gmpopcorn.com
Page 39
3 BEZEL, POWER DISPLAY
1
55435
55435
5
Tornado 200 Model No. 3005EMS, 3005XEM
Front Panel
1
Item
1 SWITCH, LIGHTED ROCKER GR 2 42798 42798
2 ROCKER SWITCH COVER 2 48786 48786
2
Part Description Qty.
3
4
Part Number
3005EMS 3005XEM
4 COVER, DIGITAL METER 1 48756 48756
5 KNOB, PAKTRONIC CONTROL 1 40793 40793
Page 19
gmpopcorn.com
Page 40
3 BEZEL, POWER DISPLAY
1
55435
55435
5
Tornado 200 Model No. 3005EMS, 3005XEM
Front Panel
1
Item
1 SWITCH, LIGHTED ROCKER GR 2 42798 42798
2 ROCKER SWITCH COVER 2 48786 48786
2
Part Description Qty.
3
4
Part Number
3005EMS 3005XEM
4 COVER, DIGITAL METER 1 48756 48756
5 KNOB, PAKTRONIC CONTROL 1 40793 40793
Page 19
gmpopcorn.com
Page 41
3 BEZEL, POWER DISPLAY
1
55435
55435
5
Tornado 200 Model No. 3005EMS, 3005XEM
Front Panel
1
Item
1 SWITCH, LIGHTED ROCKER GR 2 42798 42798
2 ROCKER SWITCH COVER 2 48786 48786
2
Part Description Qty.
3
4
Part Number
3005EMS 3005XEM
4 COVER, DIGITAL METER 1 48756 48756
5 KNOB, PAKTRONIC CONTROL 1 40793 40793
Page 19
gmpopcorn.com
Page 42
3 BEZEL, POWER DISPLAY
1
55435
55435
5
Tornado 200 Model No. 3005EMS, 3005XEM
Front Panel
1
Item
1 SWITCH, LIGHTED ROCKER GR 2 42798 42798
2 ROCKER SWITCH COVER 2 48786 48786
2
Part Description Qty.
3
4
Part Number
3005EMS 3005XEM
4 COVER, DIGITAL METER 1 48756 48756
5 KNOB, PAKTRONIC CONTROL 1 40793 40793
Page 19
gmpopcorn.com
Page 43
3 BEZEL, POWER DISPLAY
1
55435
55435
5
Tornado 200 Model No. 3005EMS, 3005XEM
Front Panel
1
Item
1 SWITCH, LIGHTED ROCKER GR 2 42798 42798
2 ROCKER SWITCH COVER 2 48786 48786
2
Part Description Qty.
3
4
Part Number
3005EMS 3005XEM
4 COVER, DIGITAL METER 1 48756 48756
5 KNOB, PAKTRONIC CONTROL 1 40793 40793
Page 19
gmpopcorn.com
Page 44
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 45
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 46
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 47
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 48
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 49
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 50
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 51
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 52
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 53
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 54
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 55
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 56
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 57
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 58
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 59
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 60
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 61
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 62
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 63
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 64
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 65
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 66
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 67
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 68
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 69
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 70
Tornado 200 Model No. 3005EMS, 3005XEM
Spinner Head Assembly – Parts List - PN 55265
Item
7 INCH SPINNER HEAD COMPLETE 1 55265
1 SPINNER HEAD BOTTOM ONLY 1 43008
2 LEATHER FLOATER 2 20010
3 SPINNER CAP 1 43014
4 10-24 X 2 1/4 PH PAN HEAD 4 20050
5 STUD INSULATOR 1-23/64 IN 4 42308
6 7 IN DBL FLOSS BAND 1 42214
7 7 IN RIBBON ASSY 200V 2 55266R
8 PHENOLIC BAND INSULATOR 2 42217
9 TERMINAL ASSY 2 42305
10 8-32 X 1/4 HX HD WHIZLOCK 4 42045
11 PHENOLIC INSULATOR TERML 1 42304
12 ACORN NUT NYLON 1/4-20 1 48041
13 1/4-20 SERRATED LOCK NUT 1 46311
14 SET SCREW 1/4-20 X 2 3/4 1 42413
15 PHENOLIC TERMINAL GUARD 1 42303
16 HEAD CASTING 1 43015
17 TOP PHENOLIC WASHER 1 42025
18 CENTER PHENOLIC WASHER 1 42026
19 BOTTOM PHENOLIC WASHER. 1 20054
20 INSULATOR SLEEVE 1 42028
21 SLIP RING 5/8 INCH 2 20020HD
22 HEAD STUD 3 1/2 LG, BRASS 2 42032
23 HEX NUT #10-32 BRASS 4 42301
24 #10 INTERNAL TOOTH WASHER 4 12573
25 STUD INSULATOR 1-3/32 IN 1 42029
26 STUD INSULATOR 5/8`` 1 42030
27 STUD INSULATOR 1-3/4`` 1 42037
28 SET SCREW 1/4-20 X 3/8 1 74125
Part Description Qty. Part No.
Page 21
gmpopcorn.com
Page 71
3005EMS
3005XEM
3 2
Tornado 200 Model No. 3005EMS, 3005XEM
Brush Assembly and Motor
1
4
5
Motor Casting
Note: Motor is located in
the Motor Mount Casting.
8
7
6
9
10
Item
1 BRUSH ASSEMBLY W/BRUSH 4 42320 42320
2 SCREW BRUSH SPRING 4 20052 20052
3 SPRING BRUSH TENSION 4 20033 20033
4 BRUSH HOLDER 4 20032 20032
5 CARBON BRUSH 4 20034 20034
6 BUSHING, SNAP .500 IN 4 47236 47236
7 INSULATOR BRUSH HOLDER 4 48017 48017
8 BRUSH PAD 4 42035 42035
9 MOTOR CASTING 1 42034 42034
10 MOTOR, 1/3 HP 230VAC 1 48669EX 48669EX
Part Description Qty.
Page 22
Part Number
gmpopcorn.com
Page 72
3005EMS
3005XEM
3 2
Tornado 200 Model No. 3005EMS, 3005XEM
Brush Assembly and Motor
1
4
5
Motor Casting
Note: Motor is located in
the Motor Mount Casting.
8
7
6
9
10
Item
1 BRUSH ASSEMBLY W/BRUSH 4 42320 42320
2 SCREW BRUSH SPRING 4 20052 20052
3 SPRING BRUSH TENSION 4 20033 20033
4 BRUSH HOLDER 4 20032 20032
5 CARBON BRUSH 4 20034 20034
6 BUSHING, SNAP .500 IN 4 47236 47236
7 INSULATOR BRUSH HOLDER 4 48017 48017
8 BRUSH PAD 4 42035 42035
9 MOTOR CASTING 1 42034 42034
10 MOTOR, 1/3 HP 230VAC 1 48669EX 48669EX
Part Description Qty.
Page 22
Part Number
gmpopcorn.com
Page 73
3005EMS
3005XEM
3 2
Tornado 200 Model No. 3005EMS, 3005XEM
Brush Assembly and Motor
1
4
5
Motor Casting
Note: Motor is located in
the Motor Mount Casting.
8
7
6
9
10
Item
1 BRUSH ASSEMBLY W/BRUSH 4 42320 42320
2 SCREW BRUSH SPRING 4 20052 20052
3 SPRING BRUSH TENSION 4 20033 20033
4 BRUSH HOLDER 4 20032 20032
5 CARBON BRUSH 4 20034 20034
6 BUSHING, SNAP .500 IN 4 47236 47236
7 INSULATOR BRUSH HOLDER 4 48017 48017
8 BRUSH PAD 4 42035 42035
9 MOTOR CASTING 1 42034 42034
10 MOTOR, 1/3 HP 230VAC 1 48669EX 48669EX
Part Description Qty.
Page 22
Part Number
gmpopcorn.com
Page 74
3005EMS
3005XEM
3 2
Tornado 200 Model No. 3005EMS, 3005XEM
Brush Assembly and Motor
1
4
5
Motor Casting
Note: Motor is located in
the Motor Mount Casting.
8
7
6
9
10
Item
1 BRUSH ASSEMBLY W/BRUSH 4 42320 42320
2 SCREW BRUSH SPRING 4 20052 20052
3 SPRING BRUSH TENSION 4 20033 20033
4 BRUSH HOLDER 4 20032 20032
5 CARBON BRUSH 4 20034 20034
6 BUSHING, SNAP .500 IN 4 47236 47236
7 INSULATOR BRUSH HOLDER 4 48017 48017
8 BRUSH PAD 4 42035 42035
9 MOTOR CASTING 1 42034 42034
10 MOTOR, 1/3 HP 230VAC 1 48669EX 48669EX
Part Description Qty.
Page 22
Part Number
gmpopcorn.com
Page 75
3005EMS
3005XEM
3 2
Tornado 200 Model No. 3005EMS, 3005XEM
Brush Assembly and Motor
1
4
5
Motor Casting
Note: Motor is located in
the Motor Mount Casting.
8
7
6
9
10
Item
1 BRUSH ASSEMBLY W/BRUSH 4 42320 42320
2 SCREW BRUSH SPRING 4 20052 20052
3 SPRING BRUSH TENSION 4 20033 20033
4 BRUSH HOLDER 4 20032 20032
5 CARBON BRUSH 4 20034 20034
6 BUSHING, SNAP .500 IN 4 47236 47236
7 INSULATOR BRUSH HOLDER 4 48017 48017
8 BRUSH PAD 4 42035 42035
9 MOTOR CASTING 1 42034 42034
10 MOTOR, 1/3 HP 230VAC 1 48669EX 48669EX
Part Description Qty.
Page 22
Part Number
gmpopcorn.com
Page 76
3005EMS
3005XEM
3 2
Tornado 200 Model No. 3005EMS, 3005XEM
Brush Assembly and Motor
1
4
5
Motor Casting
Note: Motor is located in
the Motor Mount Casting.
8
7
6
9
10
Item
1 BRUSH ASSEMBLY W/BRUSH 4 42320 42320
2 SCREW BRUSH SPRING 4 20052 20052
3 SPRING BRUSH TENSION 4 20033 20033
4 BRUSH HOLDER 4 20032 20032
5 CARBON BRUSH 4 20034 20034
6 BUSHING, SNAP .500 IN 4 47236 47236
7 INSULATOR BRUSH HOLDER 4 48017 48017
8 BRUSH PAD 4 42035 42035
9 MOTOR CASTING 1 42034 42034
10 MOTOR, 1/3 HP 230VAC 1 48669EX 48669EX
Part Description Qty.
Page 22
Part Number
gmpopcorn.com
Page 77
3005EMS
3005XEM
3 2
Tornado 200 Model No. 3005EMS, 3005XEM
Brush Assembly and Motor
1
4
5
Motor Casting
Note: Motor is located in
the Motor Mount Casting.
8
7
6
9
10
Item
1 BRUSH ASSEMBLY W/BRUSH 4 42320 42320
2 SCREW BRUSH SPRING 4 20052 20052
3 SPRING BRUSH TENSION 4 20033 20033
4 BRUSH HOLDER 4 20032 20032
5 CARBON BRUSH 4 20034 20034
6 BUSHING, SNAP .500 IN 4 47236 47236
7 INSULATOR BRUSH HOLDER 4 48017 48017
8 BRUSH PAD 4 42035 42035
9 MOTOR CASTING 1 42034 42034
10 MOTOR, 1/3 HP 230VAC 1 48669EX 48669EX
Part Description Qty.
Page 22
Part Number
gmpopcorn.com
Page 78
3005EMS
3005XEM
3 2
Tornado 200 Model No. 3005EMS, 3005XEM
Brush Assembly and Motor
1
4
5
Motor Casting
Note: Motor is located in
the Motor Mount Casting.
8
7
6
9
10
Item
1 BRUSH ASSEMBLY W/BRUSH 4 42320 42320
2 SCREW BRUSH SPRING 4 20052 20052
3 SPRING BRUSH TENSION 4 20033 20033
4 BRUSH HOLDER 4 20032 20032
5 CARBON BRUSH 4 20034 20034
6 BUSHING, SNAP .500 IN 4 47236 47236
7 INSULATOR BRUSH HOLDER 4 48017 48017
8 BRUSH PAD 4 42035 42035
9 MOTOR CASTING 1 42034 42034
10 MOTOR, 1/3 HP 230VAC 1 48669EX 48669EX
Part Description Qty.
Page 22
Part Number
gmpopcorn.com
Page 79
3005EMS
3005XEM
3 2
Tornado 200 Model No. 3005EMS, 3005XEM
Brush Assembly and Motor
1
4
5
Motor Casting
Note: Motor is located in
the Motor Mount Casting.
8
7
6
9
10
Item
1 BRUSH ASSEMBLY W/BRUSH 4 42320 42320
2 SCREW BRUSH SPRING 4 20052 20052
3 SPRING BRUSH TENSION 4 20033 20033
4 BRUSH HOLDER 4 20032 20032
5 CARBON BRUSH 4 20034 20034
6 BUSHING, SNAP .500 IN 4 47236 47236
7 INSULATOR BRUSH HOLDER 4 48017 48017
8 BRUSH PAD 4 42035 42035
9 MOTOR CASTING 1 42034 42034
10 MOTOR, 1/3 HP 230VAC 1 48669EX 48669EX
Part Description Qty.
Page 22
Part Number
gmpopcorn.com
Page 80
3005EMS
3005XEM
3 2
Tornado 200 Model No. 3005EMS, 3005XEM
Brush Assembly and Motor
1
4
5
Motor Casting
Note: Motor is located in
the Motor Mount Casting.
8
7
6
9
10
Item
1 BRUSH ASSEMBLY W/BRUSH 4 42320 42320
2 SCREW BRUSH SPRING 4 20052 20052
3 SPRING BRUSH TENSION 4 20033 20033
4 BRUSH HOLDER 4 20032 20032
5 CARBON BRUSH 4 20034 20034
6 BUSHING, SNAP .500 IN 4 47236 47236
7 INSULATOR BRUSH HOLDER 4 48017 48017
8 BRUSH PAD 4 42035 42035
9 MOTOR CASTING 1 42034 42034
10 MOTOR, 1/3 HP 230VAC 1 48669EX 48669EX
Part Description Qty.
Page 22
Part Number
gmpopcorn.com
Page 81
3005EMS
3005XEM
3 2
Tornado 200 Model No. 3005EMS, 3005XEM
Brush Assembly and Motor
1
4
5
Motor Casting
Note: Motor is located in
the Motor Mount Casting.
8
7
6
9
10
Item
1 BRUSH ASSEMBLY W/BRUSH 4 42320 42320
2 SCREW BRUSH SPRING 4 20052 20052
3 SPRING BRUSH TENSION 4 20033 20033
4 BRUSH HOLDER 4 20032 20032
5 CARBON BRUSH 4 20034 20034
6 BUSHING, SNAP .500 IN 4 47236 47236
7 INSULATOR BRUSH HOLDER 4 48017 48017
8 BRUSH PAD 4 42035 42035
9 MOTOR CASTING 1 42034 42034
10 MOTOR, 1/3 HP 230VAC 1 48669EX 48669EX
Part Description Qty.
Page 22
Part Number
gmpopcorn.com
Page 82
3005EMS
3005XEM
3 2
Tornado 200 Model No. 3005EMS, 3005XEM
Brush Assembly and Motor
1
4
5
Motor Casting
Note: Motor is located in
the Motor Mount Casting.
8
7
6
9
10
Item
1 BRUSH ASSEMBLY W/BRUSH 4 42320 42320
2 SCREW BRUSH SPRING 4 20052 20052
3 SPRING BRUSH TENSION 4 20033 20033
4 BRUSH HOLDER 4 20032 20032
5 CARBON BRUSH 4 20034 20034
6 BUSHING, SNAP .500 IN 4 47236 47236
7 INSULATOR BRUSH HOLDER 4 48017 48017
8 BRUSH PAD 4 42035 42035
9 MOTOR CASTING 1 42034 42034
10 MOTOR, 1/3 HP 230VAC 1 48669EX 48669EX
Part Description Qty.
Page 22
Part Number
gmpopcorn.com
Page 83
3005EMS
3005XEM
3 2
Tornado 200 Model No. 3005EMS, 3005XEM
Brush Assembly and Motor
1
4
5
Motor Casting
Note: Motor is located in
the Motor Mount Casting.
8
7
6
9
10
Item
1 BRUSH ASSEMBLY W/BRUSH 4 42320 42320
2 SCREW BRUSH SPRING 4 20052 20052
3 SPRING BRUSH TENSION 4 20033 20033
4 BRUSH HOLDER 4 20032 20032
5 CARBON BRUSH 4 20034 20034
6 BUSHING, SNAP .500 IN 4 47236 47236
7 INSULATOR BRUSH HOLDER 4 48017 48017
8 BRUSH PAD 4 42035 42035
9 MOTOR CASTING 1 42034 42034
10 MOTOR, 1/3 HP 230VAC 1 48669EX 48669EX
Part Description Qty.
Page 22
Part Number
gmpopcorn.com
Page 84
3005EMS
3005XEM
3 2
Tornado 200 Model No. 3005EMS, 3005XEM
Brush Assembly and Motor
1
4
5
Motor Casting
Note: Motor is located in
the Motor Mount Casting.
8
7
6
9
10
Item
1 BRUSH ASSEMBLY W/BRUSH 4 42320 42320
2 SCREW BRUSH SPRING 4 20052 20052
3 SPRING BRUSH TENSION 4 20033 20033
4 BRUSH HOLDER 4 20032 20032
5 CARBON BRUSH 4 20034 20034
6 BUSHING, SNAP .500 IN 4 47236 47236
7 INSULATOR BRUSH HOLDER 4 48017 48017
8 BRUSH PAD 4 42035 42035
9 MOTOR CASTING 1 42034 42034
10 MOTOR, 1/3 HP 230VAC 1 48669EX 48669EX
Part Description Qty.
Page 22
Part Number
gmpopcorn.com
Page 85
3005EMS
3005XEM
3 2
Tornado 200 Model No. 3005EMS, 3005XEM
Brush Assembly and Motor
1
4
5
Motor Casting
Note: Motor is located in
the Motor Mount Casting.
8
7
6
9
10
Item
1 BRUSH ASSEMBLY W/BRUSH 4 42320 42320
2 SCREW BRUSH SPRING 4 20052 20052
3 SPRING BRUSH TENSION 4 20033 20033
4 BRUSH HOLDER 4 20032 20032
5 CARBON BRUSH 4 20034 20034
6 BUSHING, SNAP .500 IN 4 47236 47236
7 INSULATOR BRUSH HOLDER 4 48017 48017
8 BRUSH PAD 4 42035 42035
9 MOTOR CASTING 1 42034 42034
10 MOTOR, 1/3 HP 230VAC 1 48669EX 48669EX
Part Description Qty.
Page 22
Part Number
gmpopcorn.com
Page 86
3005EMS
3005XEM
3 2
Tornado 200 Model No. 3005EMS, 3005XEM
Brush Assembly and Motor
1
4
5
Motor Casting
Note: Motor is located in
the Motor Mount Casting.
8
7
6
9
10
Item
1 BRUSH ASSEMBLY W/BRUSH 4 42320 42320
2 SCREW BRUSH SPRING 4 20052 20052
3 SPRING BRUSH TENSION 4 20033 20033
4 BRUSH HOLDER 4 20032 20032
5 CARBON BRUSH 4 20034 20034
6 BUSHING, SNAP .500 IN 4 47236 47236
7 INSULATOR BRUSH HOLDER 4 48017 48017
8 BRUSH PAD 4 42035 42035
9 MOTOR CASTING 1 42034 42034
10 MOTOR, 1/3 HP 230VAC 1 48669EX 48669EX
Part Description Qty.
Page 22
Part Number
gmpopcorn.com
Page 87
3005EMS
3005XEM
3 2
Tornado 200 Model No. 3005EMS, 3005XEM
Brush Assembly and Motor
1
4
5
Motor Casting
Note: Motor is located in
the Motor Mount Casting.
8
7
6
9
10
Item
1 BRUSH ASSEMBLY W/BRUSH 4 42320 42320
2 SCREW BRUSH SPRING 4 20052 20052
3 SPRING BRUSH TENSION 4 20033 20033
4 BRUSH HOLDER 4 20032 20032
5 CARBON BRUSH 4 20034 20034
6 BUSHING, SNAP .500 IN 4 47236 47236
7 INSULATOR BRUSH HOLDER 4 48017 48017
8 BRUSH PAD 4 42035 42035
9 MOTOR CASTING 1 42034 42034
10 MOTOR, 1/3 HP 230VAC 1 48669EX 48669EX
Part Description Qty.
Page 22
Part Number
gmpopcorn.com
Page 88
3005EMS
3005XEM
3 2
Tornado 200 Model No. 3005EMS, 3005XEM
Brush Assembly and Motor
1
4
5
Motor Casting
Note: Motor is located in
the Motor Mount Casting.
8
7
6
9
10
Item
1 BRUSH ASSEMBLY W/BRUSH 4 42320 42320
2 SCREW BRUSH SPRING 4 20052 20052
3 SPRING BRUSH TENSION 4 20033 20033
4 BRUSH HOLDER 4 20032 20032
5 CARBON BRUSH 4 20034 20034
6 BUSHING, SNAP .500 IN 4 47236 47236
7 INSULATOR BRUSH HOLDER 4 48017 48017
8 BRUSH PAD 4 42035 42035
9 MOTOR CASTING 1 42034 42034
10 MOTOR, 1/3 HP 230VAC 1 48669EX 48669EX
Part Description Qty.
Page 22
Part Number
gmpopcorn.com
Page 89
3005EMS
3005XEM
3 2
Tornado 200 Model No. 3005EMS, 3005XEM
Brush Assembly and Motor
1
4
5
Motor Casting
Note: Motor is located in
the Motor Mount Casting.
8
7
6
9
10
Item
1 BRUSH ASSEMBLY W/BRUSH 4 42320 42320
2 SCREW BRUSH SPRING 4 20052 20052
3 SPRING BRUSH TENSION 4 20033 20033
4 BRUSH HOLDER 4 20032 20032
5 CARBON BRUSH 4 20034 20034
6 BUSHING, SNAP .500 IN 4 47236 47236
7 INSULATOR BRUSH HOLDER 4 48017 48017
8 BRUSH PAD 4 42035 42035
9 MOTOR CASTING 1 42034 42034
10 MOTOR, 1/3 HP 230VAC 1 48669EX 48669EX
Part Description Qty.
Page 22
Part Number
gmpopcorn.com
Page 90
3005EMS
3005XEM
3 2
Tornado 200 Model No. 3005EMS, 3005XEM
Brush Assembly and Motor
1
4
5
Motor Casting
Note: Motor is located in
the Motor Mount Casting.
8
7
6
9
10
Item
1 BRUSH ASSEMBLY W/BRUSH 4 42320 42320
2 SCREW BRUSH SPRING 4 20052 20052
3 SPRING BRUSH TENSION 4 20033 20033
4 BRUSH HOLDER 4 20032 20032
5 CARBON BRUSH 4 20034 20034
6 BUSHING, SNAP .500 IN 4 47236 47236
7 INSULATOR BRUSH HOLDER 4 48017 48017
8 BRUSH PAD 4 42035 42035
9 MOTOR CASTING 1 42034 42034
10 MOTOR, 1/3 HP 230VAC 1 48669EX 48669EX
Part Description Qty.
Page 22
Part Number
gmpopcorn.com
Page 91
12 13
Tornado 200 Model No. 3005EMS, 3005XEM
Unit Interior - Model 3005EMS (Domestic)
15
1
2 3
4, 5
6
7
14
9, 10, 11
8
Item
1 RELAY, 40A DPST 208/240V 1 89803
2 TRIAC, 35A 600V 1 55155
3 HEAT SINK 1 48673
4 EXHAUST BLOWER 220V,50CY 1 48037
5 BLOWER PLUG AND CORD 1 47199
6 FINGER GUARD 1 47200
7 TERMINAL BLOCK 1 42006
8 POTENTIOMETER 1K 1 55263
9 STANDOFF 1-1/2 IN 6-32 4 55467
10 6-32 X 3/8 PHIL PAN M/S 4 39000
11 #6 SAE WASHER 4 12351
12 HEAT CONTROL, FLOSS DISPLAY 1 55267
13 FISH PAPER COVER 1 55468
14 SWITCH, LIGHTED ROCKER GR 2 42798
15 CIRCUIT BREAKER 15 AMP 1 47364
Part Description Qty.
Part No.
3005EMS
Page 23
gmpopcorn.com
Page 92
12 13
Tornado 200 Model No. 3005EMS, 3005XEM
Unit Interior - Model 3005EMS (Domestic)
15
1
2 3
4, 5
6
7
14
9, 10, 11
8
Item
1 RELAY, 40A DPST 208/240V 1 89803
2 TRIAC, 35A 600V 1 55155
3 HEAT SINK 1 48673
4 EXHAUST BLOWER 220V,50CY 1 48037
5 BLOWER PLUG AND CORD 1 47199
6 FINGER GUARD 1 47200
7 TERMINAL BLOCK 1 42006
8 POTENTIOMETER 1K 1 55263
9 STANDOFF 1-1/2 IN 6-32 4 55467
10 6-32 X 3/8 PHIL PAN M/S 4 39000
11 #6 SAE WASHER 4 12351
12 HEAT CONTROL, FLOSS DISPLAY 1 55267
13 FISH PAPER COVER 1 55468
14 SWITCH, LIGHTED ROCKER GR 2 42798
15 CIRCUIT BREAKER 15 AMP 1 47364
Part Description Qty.
Part No.
3005EMS
Page 23
gmpopcorn.com
Page 93
12 13
Tornado 200 Model No. 3005EMS, 3005XEM
Unit Interior - Model 3005EMS (Domestic)
15
1
2 3
4, 5
6
7
14
9, 10, 11
8
Item
1 RELAY, 40A DPST 208/240V 1 89803
2 TRIAC, 35A 600V 1 55155
3 HEAT SINK 1 48673
4 EXHAUST BLOWER 220V,50CY 1 48037
5 BLOWER PLUG AND CORD 1 47199
6 FINGER GUARD 1 47200
7 TERMINAL BLOCK 1 42006
8 POTENTIOMETER 1K 1 55263
9 STANDOFF 1-1/2 IN 6-32 4 55467
10 6-32 X 3/8 PHIL PAN M/S 4 39000
11 #6 SAE WASHER 4 12351
12 HEAT CONTROL, FLOSS DISPLAY 1 55267
13 FISH PAPER COVER 1 55468
14 SWITCH, LIGHTED ROCKER GR 2 42798
15 CIRCUIT BREAKER 15 AMP 1 47364
Part Description Qty.
Part No.
3005EMS
Page 23
gmpopcorn.com
Page 94
12 13
Tornado 200 Model No. 3005EMS, 3005XEM
Unit Interior - Model 3005EMS (Domestic)
15
1
2 3
4, 5
6
7
14
9, 10, 11
8
Item
1 RELAY, 40A DPST 208/240V 1 89803
2 TRIAC, 35A 600V 1 55155
3 HEAT SINK 1 48673
4 EXHAUST BLOWER 220V,50CY 1 48037
5 BLOWER PLUG AND CORD 1 47199
6 FINGER GUARD 1 47200
7 TERMINAL BLOCK 1 42006
8 POTENTIOMETER 1K 1 55263
9 STANDOFF 1-1/2 IN 6-32 4 55467
10 6-32 X 3/8 PHIL PAN M/S 4 39000
11 #6 SAE WASHER 4 12351
12 HEAT CONTROL, FLOSS DISPLAY 1 55267
13 FISH PAPER COVER 1 55468
14 SWITCH, LIGHTED ROCKER GR 2 42798
15 CIRCUIT BREAKER 15 AMP 1 47364
Part Description Qty.
Part No.
3005EMS
Page 23
gmpopcorn.com
Page 95
12 13
Tornado 200 Model No. 3005EMS, 3005XEM
Unit Interior - Model 3005EMS (Domestic)
15
1
2 3
4, 5
6
7
14
9, 10, 11
8
Item
1 RELAY, 40A DPST 208/240V 1 89803
2 TRIAC, 35A 600V 1 55155
3 HEAT SINK 1 48673
4 EXHAUST BLOWER 220V,50CY 1 48037
5 BLOWER PLUG AND CORD 1 47199
6 FINGER GUARD 1 47200
7 TERMINAL BLOCK 1 42006
8 POTENTIOMETER 1K 1 55263
9 STANDOFF 1-1/2 IN 6-32 4 55467
10 6-32 X 3/8 PHIL PAN M/S 4 39000
11 #6 SAE WASHER 4 12351
12 HEAT CONTROL, FLOSS DISPLAY 1 55267
13 FISH PAPER COVER 1 55468
14 SWITCH, LIGHTED ROCKER GR 2 42798
15 CIRCUIT BREAKER 15 AMP 1 47364
Part Description Qty.
Part No.
3005EMS
Page 23
gmpopcorn.com
Page 96
12 13
Tornado 200 Model No. 3005EMS, 3005XEM
Unit Interior - Model 3005EMS (Domestic)
15
1
2 3
4, 5
6
7
14
9, 10, 11
8
Item
1 RELAY, 40A DPST 208/240V 1 89803
2 TRIAC, 35A 600V 1 55155
3 HEAT SINK 1 48673
4 EXHAUST BLOWER 220V,50CY 1 48037
5 BLOWER PLUG AND CORD 1 47199
6 FINGER GUARD 1 47200
7 TERMINAL BLOCK 1 42006
8 POTENTIOMETER 1K 1 55263
9 STANDOFF 1-1/2 IN 6-32 4 55467
10 6-32 X 3/8 PHIL PAN M/S 4 39000
11 #6 SAE WASHER 4 12351
12 HEAT CONTROL, FLOSS DISPLAY 1 55267
13 FISH PAPER COVER 1 55468
14 SWITCH, LIGHTED ROCKER GR 2 42798
15 CIRCUIT BREAKER 15 AMP 1 47364
Part Description Qty.
Part No.
3005EMS
Page 23
gmpopcorn.com
Page 97
12 13
Tornado 200 Model No. 3005EMS, 3005XEM
Unit Interior - Model 3005EMS (Domestic)
15
1
2 3
4, 5
6
7
14
9, 10, 11
8
Item
1 RELAY, 40A DPST 208/240V 1 89803
2 TRIAC, 35A 600V 1 55155
3 HEAT SINK 1 48673
4 EXHAUST BLOWER 220V,50CY 1 48037
5 BLOWER PLUG AND CORD 1 47199
6 FINGER GUARD 1 47200
7 TERMINAL BLOCK 1 42006
8 POTENTIOMETER 1K 1 55263
9 STANDOFF 1-1/2 IN 6-32 4 55467
10 6-32 X 3/8 PHIL PAN M/S 4 39000
11 #6 SAE WASHER 4 12351
12 HEAT CONTROL, FLOSS DISPLAY 1 55267
13 FISH PAPER COVER 1 55468
14 SWITCH, LIGHTED ROCKER GR 2 42798
15 CIRCUIT BREAKER 15 AMP 1 47364
Part Description Qty.
Part No.
3005EMS
Page 23
gmpopcorn.com
Page 98
12 13
Tornado 200 Model No. 3005EMS, 3005XEM
Unit Interior - Model 3005EMS (Domestic)
15
1
2 3
4, 5
6
7
14
9, 10, 11
8
Item
1 RELAY, 40A DPST 208/240V 1 89803
2 TRIAC, 35A 600V 1 55155
3 HEAT SINK 1 48673
4 EXHAUST BLOWER 220V,50CY 1 48037
5 BLOWER PLUG AND CORD 1 47199
6 FINGER GUARD 1 47200
7 TERMINAL BLOCK 1 42006
8 POTENTIOMETER 1K 1 55263
9 STANDOFF 1-1/2 IN 6-32 4 55467
10 6-32 X 3/8 PHIL PAN M/S 4 39000
11 #6 SAE WASHER 4 12351
12 HEAT CONTROL, FLOSS DISPLAY 1 55267
13 FISH PAPER COVER 1 55468
14 SWITCH, LIGHTED ROCKER GR 2 42798
15 CIRCUIT BREAKER 15 AMP 1 47364
Part Description Qty.
Part No.
3005EMS
Page 23
gmpopcorn.com
Page 99
12 13
Tornado 200 Model No. 3005EMS, 3005XEM
Unit Interior - Model 3005EMS (Domestic)
15
1
2 3
4, 5
6
7
14
9, 10, 11
8
Item
1 RELAY, 40A DPST 208/240V 1 89803
2 TRIAC, 35A 600V 1 55155
3 HEAT SINK 1 48673
4 EXHAUST BLOWER 220V,50CY 1 48037
5 BLOWER PLUG AND CORD 1 47199
6 FINGER GUARD 1 47200
7 TERMINAL BLOCK 1 42006
8 POTENTIOMETER 1K 1 55263
9 STANDOFF 1-1/2 IN 6-32 4 55467
10 6-32 X 3/8 PHIL PAN M/S 4 39000
11 #6 SAE WASHER 4 12351
12 HEAT CONTROL, FLOSS DISPLAY 1 55267
13 FISH PAPER COVER 1 55468
14 SWITCH, LIGHTED ROCKER GR 2 42798
15 CIRCUIT BREAKER 15 AMP 1 47364
Part Description Qty.
Part No.
3005EMS
Page 23
gmpopcorn.com
Page 100
12 13
Tornado 200 Model No. 3005EMS, 3005XEM
Unit Interior - Model 3005EMS (Domestic)
15
1
2 3
4, 5
6
7
14
9, 10, 11
8
Item
1 RELAY, 40A DPST 208/240V 1 89803
2 TRIAC, 35A 600V 1 55155
3 HEAT SINK 1 48673
4 EXHAUST BLOWER 220V,50CY 1 48037
5 BLOWER PLUG AND CORD 1 47199
6 FINGER GUARD 1 47200
7 TERMINAL BLOCK 1 42006
8 POTENTIOMETER 1K 1 55263
9 STANDOFF 1-1/2 IN 6-32 4 55467
10 6-32 X 3/8 PHIL PAN M/S 4 39000
11 #6 SAE WASHER 4 12351
12 HEAT CONTROL, FLOSS DISPLAY 1 55267
13 FISH PAPER COVER 1 55468
14 SWITCH, LIGHTED ROCKER GR 2 42798
15 CIRCUIT BREAKER 15 AMP 1 47364
Part Description Qty.
Part No.
3005EMS
Page 23
gmpopcorn.com
Loading...