Goldair GPTF390 User Manual

Platinum Series
117cm Tower Fan with WiFi

Model: GPTF390

General Care and Safety Guide

Thank you for choosing this Goldair product. This Goldair appliance has been designed
and manufactured to high standards of engineering and with proper use and care, as
described in this leaflet, will give you years of useful service. Please read these
instructions carefully and keep them for future reference.

1. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.

2. Children should be supervised to ensure that they do not play with the appliance.

3. If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.

4. Ensure that the fan is switched off from the supply mains before removing the
guard.

5. Use only the voltage specified on the rating plate of the appliance.

6. Keep all objects at least 1 Metre from the front, sides and rear of the appliance

7. This appliance is intended for household use only and not for commercial or
industrial use.

8. Use this appliance only as described in this manual. Any other use is not
recommended by the manufacturer and may cause fire, electric shock or injury.

9. The common cause of overheating is deposits of dust or fluff in the appliance.
Ensure these deposits are removed regularly by unplugging the appliance and
vacuum cleaning the air vents and grills.

10. Always unplug appliance when not in use.

11. When the appliance has been unpacked, check it for transport damage and ensure
all parts have been delivered. If parts are missing or the appliance has been
damaged, contact the Goldair Customer Services Team.

12. If your appliance does not work, or is not working properly, contact the place of
purchase. Repair work on the appliance by unqualified persons can cause serious
risk to the user.

13. Ensure hands are dry before handling the plug or the main unit.

14. Carry out regular checks of the supply cord to ensure no damage is evident.

15. Ensure that the cord is fully extended (not coiled) while in use.

16. Avoid contact with the moving parts. Keep hands, hair, clothing, away from blade
of the fan during operation to reduce the risk of injury to person and/or damage
to the unit.

17. Switch off and use handles provided when moving.

18. It is recommended that this fan is plugged directly into the wall socket.

19. A correctly specified, undamaged extension cord may be used with this fan
provided it is used in a safe manner.

TECHNICAL SPECIFICATION

Model: GPTF390
Supply: 220 - 240VAC 50-60Hz
Wattage: 45W

General Care and Safety Guide

20. Never place appliance close to radiant heat source.

21. Never operate in areas where petrol, paint or other flammable liquids are used or

stored.

22. Never use the appliance to dry clothes.

23. Never insert or allow foreign objects to enter any ventilation or exhaust opening,

as this may cause an electric shock, fire or damage to the appliance.

24. Never use abrasive cleaning products on this appliance. Clean with a damp cloth

(not wet) rinsed in hot soapy water only. Always remove plug from the mains
supply before cleaning.

25. Never connect the appliance to mains supply until completely assembled and

adjusted.

26. Never remove plug from power socket until the appliance has been switched off.

27. Never remove plug from power socket by pulling cord – always grip plug.

28. Never twist, kink or wrap the cord around the appliance, as this may cause the

insulation to weaken and split. Always ensure that all cord has been removed from
any cord storage area and is unrolled before use.

29. Never use this appliance in the immediate surrounds of a bath, a shower, or a

swimming pool or other liquids. The appliance must not be immersed in any
liquids.

30. Due to the risk of injury, never use this appliance for any purpose other than its

intended use. This appliance is intended for use in household and similar
applications such as staff kitchen areas in shops, offices and other working
environments; farm houses, by clients in hotels, motels, bed and breakfast type
environments and other residential type environments

31. Never use this appliance outdoors.

32. Never operate the appliance with a damaged cord or plug, after it malfunctions, or

if it has been damaged in any manner. Have the appliance checked and repaired
by a qualified electrician if repair is necessary.

33. Never place the unit in wardrobes or other enclosed spaces as this may cause fire

hazards.

WARNING!

DANGER IF SWALLOWED

Keep batteries out of reach of
children. Swallowing may lead to
serious injury or death in as little

as 2 hours due to internal burns.

If swallowed, go straight to a

hospital emergency room.

Dispose of used batteries

immediately.

General Care and Safety Guide

The remote control supplied with this heater uses a CR2025 coin type battery.

DANGER IF SWALLOWED

Keep batteries out of reach of children. Swallowing may lead to serious injury or death in
as little as 2 hours due to internal burns.
If swallowed, go straight to a hospital emergency room.
Dispose of used batteries immediately.

The remote control has a screw that needs to be removed to be able to access the
battery holder. Always replace this screw once battery change has been made.

Assembly

The base of the tower fan comes in two parts, which fit around the oscillation base.
Both parts fit easily together. The back half is the one with cut-outs for the power supply cord.
First remove the large plastic nut from the bottom of the main fan body.
Attach the front half of the base, aligning the holes in base with the locating lugs in the oscillation
base, and leading the power cord through the centre hole.
Then snap the back half of the base to the front half and secure to the base of the fan with the
large plastic nut.

Thread the power supply cord through the two cut-outs at the bottom of the base.

WARNING:Keep all objects at least 1 metre from the front, sides and rear

of the appliance. IMPORTANT! NEVER COVER THIS APPLIANCE!

Place the fan on a dry, level and sturdy surface.

Ensure the fan speed control is on the OFF position before plugging the power cord into the
socket.

Fan control

The fan can be operated by the manual controls located on
the top of the fan or by the remote control.

POWER: Turn the FAN on by pressing the ‘POWER’ button.
Turn the FAN off by pressing the ‘POWER’ button again.

SPEED: You can adjust the fan speed to the desired level:
low (I), medium (II), or high (III) by pressing ’SPEED’ .
The speed setting is displayed on the LED panel.

MODE: Pressing the ’ MODE’ button will set the FAN into
NORMAL , NATURAL, SLEEP or CHILD mode.

• NORMAL Mode: the fan will work at any speed you set up.

• NATURAL Mode: the fan will start work at high speed(15s), middle speed(15s) and low

speed(15s), it works as per this recycle.

• SLEEP Mode: if you set the mode at high speed, fan will work at high speed at 30 mins, then
transfer to middle speed at 30 mins and transfer to low speed until fan stop working.

• Child Mode: Fan will be in auto. Set up timer at 3 hours, oscillation function will start, Ionizer
function will start (if it has this function). And it will work at high speed for 15 minutes, then
transfer to middle speed for 15 minutes, then transfer to low speed until it turns off.

• You can turn off the oscillation function manually.

TIMER: The fan is equipped with a timer that allows you to set it’s

length of operation from 0.5 hour to 12 hours.

OSC: Pressing the ‘OSC’ button will start and stop the oscillation function.

Operating your Fan

Always choose a safe location for the fan, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. This appliance
requires no installation, it should be used solely as a portable appliance.

WiFi – Downloading and Setting up APP

For WiFi, the APP is supported only on 2.4GHz WiFi channels. Please ensure your
phone is 2.4GHz capable.

Read and agree to the Tuya Mobile Privacy Notice.

Tap REGISTER in the centre of the screen.
If you already have an existing account, then you
can Log In.

Download Goldair mobile APP

• Open the APP Store or Google Play on your
mobile phone.

• Open “Search” and enter “Goldair"

• Click “GET” and begin to download and install.

Once downloaded to your phone open the APP