GODOX Photo Equipment Co., Ltd.
/Add: A4 Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong
Town, Baoan District, Shenzhen 518103, China
/Tel: +86-755-29609320(8062) |
/Fax: +86-755-25723423 |
/E-mail: godox@godox.com |
http://www.godox.com |
705-GS2000-00 |
Made In China |
GS 
Compact Studio Flash
Instruction Manual
|
|
|
|
Chinese English Bilingual |
|
|
|
|
|
||||||
|
FOREWORD
Thanks for choosing Gemini GSII series studio flash. It is a durable and good quality strobe with complete functions to help photographers create desired lighting effects. The product is suited for wedding, portrait, and product photography. The GSII flash offers:
Built-in Godox 2.4G wireless X system
Precise output displayed on LCD panel, 50 steps from 1/32 to 1/1 (or 5.0-10.0) in
0.1 increments
High-qualified modeling lamp, 150W output and 5% to 100% manual light adjustment
Outstanding output stability, a tolerance of ≤ 2% under the same output
Anti-preflash function, enabling synchronization with cameras having a onepreflash firing system
Adjusted parameters intelligently remembered after 3s and automatically recovered after a restart
Wireless control of the flash power ratio, the on-and-off of modeling lamp and buzzer, as well as flash triggering with Godox X1, XT32 or FT-16 flash trigger
CONTENTS
09 |
Foreword |
15 |
• Slave Trigger Model |
10 |
Warning |
15 |
• Buzz Function |
10 |
Caution |
15 |
• Key Combination |
11 |
Names of Parts |
15 |
• Alarm Display |
11 |
• Body |
15 |
• Memory Function |
12 |
• LCD Panel |
16 |
• Wireless Control Function |
12 |
• Accessories |
17 |
• Tube Replacement |
12 |
Separately Sold Accessories |
18 |
Technical Data |
13 |
Operations |
18 |
Maintenance |
13• Flash Preparation
13• Power Connection
13• Modeling Lamp
14• Power Output Control
14• Test Button
14• Sync Triggering
14• GR/CH Button
Warning
To prevent damage to the product or injury to you or to others, read the following warnings in their entirety before using this product. Keep these safety instructions where users can read them for ready reference.
Do not disassemble or modify. Should the product break down, send the defective back to the authorized service center for inspection and maintenance.
Keep dry. Do not handle with wet hands, immerse in water, or expose to rain.
Keep out of reach of children.
Please put the device in a ventilation environment and keep the parts of lighting and heat dissipation holes are unobstructed. Do not use in flammable environment.
As this product adopts make and break device, please keep it easy to be used.
No touching the heating parts of this product.
Please turn off the power and wear insulated gloves before installing and connecting accessories. When replacing the tube or modeling lamp, please make sure that the tube is cool and wear insulated gloves to prevent burns.
Do not flash directly towards naked eyes (especially those of babies), otherwise it may lead to visual impairment.
Disconnect from the power supply when it will not be used for an extended period.
CAUTION
After 30 continuous flashes at full power, the flash should be cooled down for about 3 minutes. Overheating will occur if it is used continuously without cooling down.
Do not keep using the modeling lamp for a long time; otherwise flammable accessories attaching to flash head, e.g. softbox will get burnt. A 10-minute time is recommended in this case. After 10 minutes, cool it down for 1 minute.
When using a snoot, do not keep the modeling lamp on for a long time or fire too frequently (not over six times for one minute). Overheating will result in damages for strobe housing and/or studio light.
Avoid sudden impacts as this can damage the flash tube and/or modeling lamp.
- 09 - |
- 10 - |
Loading...