Declaration of Conformity
Hereby GOCLEVER Technology declares that the product complies with the essential
requirements and other provisions of Directive 199/5/WE.
Environmental Protection
The device is subject to the WEEE Directive 2002/96/EC. The symbol next to mean that the
product must be disposed of separately and should be shipped to the appropriate collector.
This allows you to limit pollution and the impact on human health.
Also like to inform that our company has the obligations under the Act on waste electronic
equipment, including in his collection, treatment, recovery and recycling is supported by
KARAT ELECTRO-RECYCLING Ltd. If you have any questions or concerns you can contact
Karat call 056-623-80-91.
Responsibility
GOCLEVER Technology Company nor any of its licensors shall not be liable for any loss of
data or profits, as well as for any other consequential or indirect damages resulting from the
use of equipment brand, in any case and the maximum permitted by law. GOCLEVER
Technology is not responsible for any problems related to the malfunctioning of the operating
system and applications operating under its control.
Changes
GOCLEVER Technology reserves the right to revise this document and the specifications of
the device, without notice to you. These features and images may vary depending on the
services offered by the operator and software version of the device.
Before using
Remember that the battery is not charged. Opening or attempt to disassemble the outer
casing of the device will void the warranty.
Google is a registered trademark, and Google Maps is a trademark of Google Inc.. in the
United States and other countries. YouTube is a trademark of Google Inc..
GOCLEVER Technology Company is not liable for technical or editorial errors or for
omissions contained herein is not responsible for incidental or consequential damages
resulting from furnishing this material.
Information is presented in such a state in which you adopt them, and are not covered by any
warranty. Subject to change without notice. GOCLEVER Technology Company reserves the
right to change the contents of this document without prior notice. The manual describes
basic functions of the device.
Security
Please refer to these guidelines. Failure to comply with them may cause danger to life or
health or may be illegal. For further information, please read the entire manual. Unit was
designed to operate from battery and mains supply with the charger. Using the device in a
different way can be dangerous and will void the warranty.
Charging Battery
The unit should be connected only to a power source in accordance with the parameters set
out in the specification. In case of doubt as to the type of power source required, consult an
authorized service provider or local power company. If the product is powered from a battery
or other sources, follow the instructions supplied with the product.
The impact of external factors and the electromagnetic field
3
The device is not waterproof. Make sure that it was always dry, protect from moisture. The
device also must be protected against high and low temperatures, dust, sand, do not expose
it to shock, throw, as this may damage it or its components.
Do not use the device in a damp and very high or low temperatures.
•
Do not leave the device in the vehicle or in places where temperatures exceed 50
•
degrees Celsius.
Do not use the equipment on board aircraft and in areas where it is not allowed to use
•
equipment that may emit an electromagnetic field for example a hospital, petrol station,
a warehouse of explosives violations of these rules may result in fire or explosion.
Do not use the device while driving.
•
Do not use the device near strong electromagnetic sources, such as microwave ovens,
•
sound speakers, TV and radio.
Use only original manufacturer-approved accessories, or accessories that do not
•
contain metals.
Service and Repair
For repair use the authorized service and qualified staff, any attempt to repair yourself,
or by unauthorized service will void the warranty.
High-performance ARM11 processor Frequency
720MHz Support for hardware 3D graphics
acceleration
Telechips TCC9201
Size 7 inch; Resolution WVGA 800*480; Color 16
million colors;
Resistive, single touch
DDR2 256MB
Built-in flash memory 4GB
Support external TF card, maximum capacity of 32GB
Integration
1 speaker
Built-in 2200mAh High Polymer Li-ion Rechargeable
Battery
DC 5V/2A
* USB 2.0 Host 1*USB2
1*HDMI
OS
Network
Video resolution
Video
Audio
GPS
Included in Box
Weight
Size
Color
Application
Google Android 2.3
IEEE802.11b/g wireless network;
Max support 1280*720
Built in
unit; Power adapter; Mini USB Cable; Manual;
warranty card
330g
183*115*15.4mm
Black
Web Browsing; Email; MSN SKPE; Games;
E-book; Text processing; Video player; Music player;
Others supporting Android 2.3 OS Programs; Built-in
Google map etc.
5
1. Visual Description
Refer to below picture:
Front View
(1) Battery Charge Indicator
Left View
(2) Headphone Interface
(3) SD/MMC slot
(4) HDMI
(5) USB Interface/Charging
Top View
(6) Antenna
(7) Power
(8) Home/Return
(9) Menu
Back View
(10) Reset
(11) Loudspeaker
(12) Stylus
6
2. Power management
2.1 Power adaptor and charging indicator
Power input is 5V/2A; Please don’t use other one with different specs.
Charging time, the charging indicator is red; charging full, indicator will turn to green.
2.2 Power ON/OFF
Power ON: Ensure power is sufficient firstly. Long pressing the Power button for 4s, greeting
image appears, releasing power button. After system booting, the unit enter lock-screen
image, as below:
Z
Pull the “Unlock icon” upward to green dot position to enter main menu; Pull the “Mute
icon” downward to green dot position to mute mode.
Power OFF: Long pressing the Power button for 4s. The unit will enter confirmation of
shutdown as below:
7
Sleeping: Short pressing Power button for 1s, system enters sleeping state, the screen go
black; Short pressing power button for 1s to wake up. If low power when sleeping, the unit
will wake up and shutdown automatically.
Forced shutdown: It takes 15s to force shut down by long pressing power button.
3. Inner and external storage
3.1 Classification of storage
The unit supports 3 storage spaces: Inner storage, USB type external storage, TF card.
Inner storage is 4GB size. The application files installed by APK will be stored here.
USB type storage and TF card support max up to 32GB
3.2 How to use storage
Insert storage to corresponding slot, “Preparing SD card/USB device” will show in left top of
screen. Run ES File explorer to read these storages.
The file of TF card will be found under folder named “sdcard”; the file of USB device will be
found under folder named “scsi”; the file of inner storage will be found under folder named
“nand”.
Caution: Before removing the storage, ensure all of files in the storage have been closed.
Otherwise, it is possible to break this storage; meantime, the unit will close the running
application to protect system.
3.3 How to connect with PC
Connect the unit to the PC via USB cable, Drag the status bar downward to get the
notification image like below.
8
Tap “USB connected (internal)” to mount the driver to read/copy/send/delete the files in the
inner storage from PC. Tap “USB connected (external)” to mount the driver to
read/copy/send/delete the files in the external storage from PC.
Loading...
+ 17 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.