GN Audio USA OTE6 User Manual
NEED MORE HELP?
Why wait? Go to our support page and find all the answers
you’re looking for 24-hours a day. www.jabra.com/CLIPPER
© 2009 GN Netcom US, Inc. all rights reserved. Jabra® is a registered
trademark of GN Netcom A/S. All other trademarks included herein
are the property of their respective owners. The Bluetooth® word
mark and logos are owned by the Bluetooth SIG, Inc. and any use
of such marks by GN Netcom A/S is under license. (Design and
specifications subject to change without notice).
Made in China
TYPE: OTE6
www.jabra.com
CUSTOMER CONTACT DETAILS:
www.jabra.com/nasupport
(for the latest support info and online User Manuals)
1 (800) 327-2230 (U.S.)
1 (800) 489-4199 (Canada)
GN Netcom Inc. • 77 Northeastern Boulevard • Nashua, NH 03062 • USA
For more information please visit
www.jabra.com
Jabra® CLIPPER
+
Quick start manual
www.jabra.com
A
B
C
E
H
F
D
a First time
pairing
On/O
4 secs
5.1.
5.1
Multi-Function
6 secs
5.2
b Later Pairing
PIN:0000
+
G
3. 4.
Multi-Function
4 Secs
6.
7.
+
EN NB: Chapter headings and illustrations share the same number to aid
understanding.
FR Remarque : pour faciliter la compréhension, les en-têtes de chapitre et les
illustrations portent les mêmes numéros.
PT Obs: Os cabeçalhos e as ilustrações do capítulo usam o mesmo número para
auxiliar na compreensão.
ES Nota: Para evitar confusiones, los encabezados de los capítulos y las
ilustraciones tienen la misma numeración.
PLEASE NOTE: Before using your new Jabra CLIPPER headset, you must
fully charge it (approximately 2 hours) and set it up by ‘pairing it’ with
your selected Bluetooth® device.
1 ABOUT YOUR JABRA CLIPPER
EN
A Microphone
B Charging connector
C LED
D Multi-Function button
E 3.5mm jack for earphones
F Volume up
forward skip track/
G Volume down
forward skip track/
H Stereo earphones
(exchangeable)
2 GET TING STARTED
Follow these three steps before using your headset:
1 Charge your headset (approximately 2 hours)
2 Activate Bluetooth® on your mobile phone (refer to the manual for
your mobile phone)
3 Pair your headset to your mobile phone
EN
3 CHARGING YOUR JABRA CLIPPER
Make sure that your Jabra CLIPPER is fully charged before you start
using it for the rst time. While charging, the battery indicator changes
from red to green when fully charged. Charging time is approximately
2hours. You can use the Jabra CLIPPER during charging. Please note:
The lifetime of the battery will be signicantly reduced if your device is
left uncharged for a long period. Jabra therefore recommends that you
recharge your device at least once a month.
4 TURNING YOUR JABRA CLIPPER ON AND OFF
Press and hold the Multi-Function button until the LED turns green to
turn it on.
Press and hold the Multi-Function button until the LED turns red to turn
it o.
The headset will automatically turn o after 10 minutes if not connected
to a device.
5 PAIRING YOUR JABRA CLIPPER TO A PHONE OR
OTHER DEVICE
Headsets are connected to phones or other Bluetooth® devices using a
procedure called ‘pairing’. By following a few simple steps, pairing can be
done in a matter of seconds.
5.1 Put the headset in pairing mode
EN
a First time pairing
Turn on the headset and the Jabra CLIPPER will automatically enter
pairing mode (indicator light is solid blue) and start searching for a
device.
b Later pairing
Starting with the unit turned o, press and hold the Multi-Function
button until the indicator light is solid blue (approximately 6 seconds).
5.2 Set your Bluetooth® phone or device to search for the Jabra CLIPPER
Follow your phone’s instruction guide. First make sure that Bluetooth® is
activated on your mobile phone. Then set your phone to search for the
headset. This usually involves going to a ‘setup,’ ‘ connect’ or Bluetooth®
menu on your phone and selecting the option to search for or ‘add’ a
Bluetooth® device.*
5.3 Your phone will nd the Jabra CLIPPER
The phone will nd the headset under name “Jabra CLIPPER”.
Your phone then asks if you want to pair with the headset.
Accept by pressing ‘Yes’ or ‘OK’ on the phone and conrm with the
passkey or PIN = 0000 (4 zeros) if required.
Your phone will conrm when pairing is complete.
* Phone dependent
EN
6 WEARING STYLE
Jabra CLIPPER is designed as a clothing clip. This gives you a variety of
simple and practical wearing styles: Just clip it on your shirt, jacket, t-shirt
or whatever that ts your needs.
Please note: Do not extend the metal-clip by more than four (4) millimeters,
as it will bend out of shape permanently.
7 HOW TO
The Jabra CLIPPER is easy to operate. The buttons perform dierent
functions depending on how long you press them:
Duration of press
Tap Press the button briey
Double tap Press the button briey two times within
Press Press the button approximately 1 second
Press and hold Press the button approximately 4 seconds
0.5 seconds
Play music (Some phones may require you to start a media player
EN
rst)*
- Tap the Multi-Function button.
Pause music
- Tap the Multi-Function button – tap again to resume playing.
Answer a call when playing music
- Tap the Multi-Function button and the music will be paused and the
call will be connected.
End a call
- Tap the Multi-Function button to end an active call - when you end
the call, your music will start again**.
Skip one track forward**
- Press and hold the ‘+’ volume control button.
Skip one track back**
- Press and hold the ‘–‘ volume control button.
Answer a call
- Tap the Multi-Function button to answer a call.
End a call
- Tap the Multi-Function button to end an active call.
* Refer to phone’s user manual
** Phone dependent
Reject a call**
EN
- Press and hold the Multi-Function button when the phone rings to
reject an incoming call.
Depending on your phone settings, the person who called you will either
be forwarded to voice mail or hear the busy signal.
Make a call**
- When your Jabra CLIPPER is connected to your phone, all calls made
from your phone will automatically be transferred to your headset
(subject to phone settings).
Redial last number**
- Double tap the Multi-Function button.
Adjust sound and volume*
- Tap the +/- volume control button to turn volume up or down.
Mute microphone when on a phone call
- Tap the – and + volume button simultaneously to mute and un-mute.
Visit www.jabra.com/CLIPPER for full user manual
* Refer to phone’s user manual
** Phone dependent
Loading...