GN Audio USA OTE10 User Manual

PLEASE NOTE: Before using your new Jabra

HALO2 headset, you must fully charge it and
set it up by ‘pairing it’ with your selected
Bluetooth® device.

US/CA

1 About your Jabra HALO2

1 Answer/End or Play/Pause button
2 Volume Control or Track Change touch

sensor
3 Hinges for folding of headset
4 Battery indicator
5 Bluetooth connectivity indicator

2 Charging your Jabra HALO2

Make sure that your Jabra HALO2 is fully charged
before using it for the rst time. While charging,
the battery indicator light is red and when fully
charged the battery indicator light is solid green.

Charging time is approximately 2h. You can use
the Jabra HALO2 while charging it.

3 Turning your Jabra HALO2 on and off

Unfolding the headset will turn it on; Folding
the headset will turn it o.

1. To fold: Carefully extend the headset at
the hinges (3) and fold. The headset will now
conveniently fold into a compact size.

2. To unfold: Carefully unfold the headset and
lock the hinges into place.

4 Pairing your Jabra HALO2

US/CA

to a phone or other device

1.a. First time pairing

Unfold the headset and the Jabra HALO2 will
automatically enter pairing mode and search
for a device.

1.b. Later pairing

Press and hold the Answer/End button (1) until
the indicator light (5) is solid blue (approxi­mately 4 seconds).

2. Activate Bluetooth on your phone or other
device and search for Bluetooth devices and
select Jabra HALO2.

3. Press “OK” on the phone or device and con­rm with PIN code 0000 (4 zeros).

5 Using your Jabra HALO2

Answer or end a call

- Tap the Answer/End button (1) to receive /

end calls

Adjust sound and volume*

- Use the touch control (2) for turning volume

up or down

Play or pause music

- Tap the Answer/End button (1) to play /

pause music

* Phone dependent

Change between music tracks*

US/CA

- Use the touch control (2) for next track

(double tap on +) or previous track (double

tap on -)

Using your Jabra HALO2 with the 3.5mm
music cable (not Bluetooth)

- Insert the 3.5mm music cable to the micro-

USB socket and connect the 3.5mm jack into

the device. Using your Jabra HALO2 with

the 3.5mm music cable is not possible if the

battery is completely discharged, so make

sure that it is at least partly charged.

6 Wearing style

Please note the left/right wearing indicators
inside the headband.

Adapt the size of your Jabra HALO2 by extending
the length of the headband at the speakers.

Visit www.jabra.com/HALO2 for full user
manual

* Phone dependent

ATENÇÃO: Antes de usar o novo fone Jabra
HALO2, carregue totalmente a bateria e faça
o "pareamento" com o dispositivo Bluetooth®
selecionado.

BR

1 Informações sobre o Jabra HALO2

1 Botão Atender/Terminar ou Reproduzir/

Pausar
2 Sensor sensível ao toque de Controle de

Volume ou Mudança de Trilha
3 Dobradiças para dobrar o fone
4 Indicador de bateria
5 Indicador de conectividade Bluetooth

2 Carga do Jabra HALO2

Certique-se de que o Jabra HALO2 esteja
totalmente carregado antes de usá-lo pela
primeira vez. Durante a carga, a luz indicadora
de bateria ca vermelha e quando está
totalmente carregada, ca verde.

O tempo de carga é de cerca de 2h. Você pode
usar o Jabra HALO2 enquanto o carrega.

3 Ligar e desligar o Jabra HALO2

Abra o fone para ligá-lo e feche-o para desligá-lo.

1. Para fechar: estenda o fone até as dobradiças
(3) e feche-o. O fone agora cará num tamanho
compacto.

2. Para abrir: desdobre o fone e trave as
dobradiças no lugar.