GME GX625 Instruction Manual

Page 1
GX625 VHF Marine Radio
INSTRUCTION MANUAL
Page 2
2
CONTENTS
INTRODUCTION .....................................................................2
CAUTION ............................................................................... 2
Water Resistance ..............................................................2
RF RADIATION INFORMATION ...............................................3
RF Radiation Profile ...........................................................3
RF Radiation Safety ........................................................... 3
OPERATING RULES.................................................................4
Radio Operator Qualifications ............................................ 4
RANGE ..................................................................................4
CHARGING THE BATTERY PACK ............................................. 4
CONTROLS .............................................................................5
Key Functions....................................................................6
Key Arrangement .............................................................6
LCD ..................................................................................6
OPERATION ...........................................................................7
Power On/Off .................................................................... 7
Volume ............................................................................ 7
Squelch .............................................................................7
Selecting Channels ............................................................ 7
Transmitting .....................................................................7
Transmit Time-out ............................................................. 7
High/Low Power................................................................7
Back Light .........................................................................7
Priority Channel 16 ...........................................................7
Second Priority Channel ....................................................7
Lock Key ........................................................................... 7
Channel Set (UIC Band) ..................................................... 8
Weather Channels (USA and Canada Channels Only) ......... 8
Beep Adjustment ..............................................................8
Memory Channels ............................................................. 8
Scanning ...........................................................................8
Dual Watch ....................................................................... 9
Triple Watch .....................................................................9
CHANNEL LISTS ...................................................................10
U.S. MARINE VHF CHANNELS AND FREQUENCIES ................ 12
Weather Channels...........................................................14
CANADIAN MARINE VHF CHANNELS AND FREQUENCIES.....14
Weather Channels...........................................................16
SPECIFICATIONS ..................................................................17
SC WARRANTY AGAINST DEFECTS .......................................18
The GX625 is supplied with the following standard accessories:
Belt Clip – MB625 Antenna – AE4027
Charging cradle – BCD625 AC Plug Pack – PS004
Battery Pack – BP025
INTRODUCTION
Congratulations on purchasing this GME fully featured VHF marine radio. Your GX625 has been built to offer excellent value by combining advanced features, great design and manufacturing quality. To ensure you are familiar with the operation and features of your radio, and in order to obtain the best performance, please read this manual thoroughly before operation.
CAUTION
IMPORTANT: READ ALL INSTRUCTIONS carefully and
completely before operating your radio and retain this manual for future reference.
NEVER: connect the radio to a power source other than the
supplied battery. This may damage your product.
NEVER: operate your radio with the antenna less than 5 cm
from exposed parts of the body.
NEVER: use or charge your radio in a potentially explosive
atmosphere.
DO NOT: use your radio with a damaged antenna.
DO NOT: attempt to modify your radio in any way.
ALWAYS: charge your radio at normal room temperature.
ALWAYS: switch off your radio where notices restrict the use
of two-way radio or mobile telephones.
AVOID: storing or charging your radio in direct sunlight.
AVOID: storing or using your radio where temperatures are
below -20º C or above +60º C.
WATER RESISTANCE
This product is an IP66 water resistant design. In order to achieve the best performance, please ensure:
1. The antenna is firmly attached. The O-ring at the base of antenna mounting is part of the water resistant design Please ensure the antenna is firmly attached to ensure the water resistant properties are maintained.
2. The rubber cap is fully inserted into the ear/mic socket on the top panel.
Page 3
3
RF RADIATION INFORMATION
RF RADIATION PROFILE
Your radio is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environment at operating duty factors of up to 50% transmitting and is authorised by the FCC for occupational use only. In terms of measuring RF energy for compliance with the FCC exposure guidelines, your radio radiates measurable RF energy only while it is transmitting (during talking in PTT mode), not when it is receiving (listening) or in standby mode.
The device complies with SAR and/or RF field strength limits of RSS-102 requirements.
RF RADIATION SAFETY
In order to ensure user health, experts from relevant industries including science, engineering, medicine and health work with international organizations to develop standards for safe exposure to RF radiation. These standards consist of:
• United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J;
• American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992;
• Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1999;
• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998;
FCC Regulations
Federal Communication Commission (FCC) requires that all radio communication products should meet the requirements set forth in the above standards before they can be marketed in the US, and the manufacturer shall post a RF label on the product to inform users of operational instructions, so as to enhance their occupational health against exposure to RF energy.
Part 15 Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. Note: ’Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.’
EU Regulatory Conformance
As certified by the qualified laboratory, the product is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC. Please note that the above information is applicable to EU countries only.
O-ring
Rotate until tight
Antenna
Rubber cap
Ear / mic accessory jack (HS014)
Page 4
4
OPERATING RULES
Priorities
• Read all rules and regulations pertaining to priorities and keep an up-to-date copy handy. Safety and distress calls take priority over all others.
• You must monitor Channel 16 when you are not operating on another channel.
• False or fraudulent distress calls are prohibited under law.
Privacy
• Information overheard but not intended for you cannot lawfully be used in any way.
• Indecent or profane language is prohibited.
RADIO OPERATOR QUALIFICATIONS
A certificate of proficiency is required to operate a VHF marine radio. The certificate shows that the holder understands distress and safety procedures, knows how to respond to an emergency call and helps to ensure that your messages are understood by others.
The minimum qualification is generally the Short Range Operators VHF Certificate of Proficiency (SROCP) however in Australia a new Australian Waters Qualification (AWQ) has been introduced for marine radio users who only operate VHF marine radios in Australian Territorial Waters.
A person who doesn’t hold a certificate may operate a VHF radio if they are in the immediate vicinity of the certified operator and radio so that they can step in and take over if necessary
Persons operating a VHF marine radio without holding an appropriate qualification or being under the supervision of an appropriately qualified person, may be breaching the Radio communications Act.
RANGE
The range of VHF transmissions depends on antenna height, transmitter power and the terrain over which the signals pass. For a 5 watt handheld radio like the GX625, ship to ship communications up to 5 nautical miles should be possible. Using an external antenna should allow ship to ship communication of 8 nautical miles or more. Ship to shore ranges will often be greater due to the increased height of the shore antenna.
CHARGING THE BATTERY PACK
The GX625 has a rechargeable 1200mAh Li-Ion battery pack. To charge the battery, plug the AC charger unit into the mains supply and plug the DC connector into the charging cradle. Place the GX625 into the cradle for charging. The battery should charge in around 2 hours.
Removing the battery pack
To remove the battery pack, lift the locking lever at the base of the battery pack and rotate. Lift the battery pack from the base of the radio and slide the battery pack away from the radio.
To re-fit the battery pack, slide the top of the battery pack in towards the radio then press the base of the battery pack downwards against the battery contacts. Rotate the battery lever upwards and press into place so that it clicks firmly.
Page 5
5
CONTROLS
GX625
Antenna
PTT
Keypad
Microphone
Ear / mic accessory jack (HS014)
Display
Power switch
Speaker
Page 6
6
KEY ARRANGEMENT
LCD
Key Functions
Key Short Press Long Press ( > 3 sec )
HI/LO /Lock TX Power Hi/Low Key Lock
16 CH 16 User Programmable Priority Channel
DW/TRIW Dual Watch mode Triple Watch mode
Power Switch On Off
SCAN All Scan/All Memory Scan Priority all/memory Scan
MEM MEMORY Mode Save/Delete Memory Channel
Up/Down Channel Up/Down Channel Fast Up/Down
CH/WX/UIC Channel/Weather Band Selection
VOL/SQL VOLUME Set SQUELCH Set
Channel/Weather/Band
Up
Channel 16
Down
Scan
Private Scan
Hi/Lo Power
Triple Watch
Dual Watch
Squelch Level
Volume Level
USA/International/Canada
Battery Level
Memory Icon
Lock Icon
Current Channel
Channel Suffix
Weather
Hi/LO Power/Key Lock
Dual Watch/Triple watch
Volume/Squelch
Power ON/OFF
Memory
Channel Prefix Transmit Busy Memory
Page 7
7
OPERATION
POWER ON/OFF
Press and hold the
key to switch the radio ON.
Press and hold the
key to switch the radio OFF.
VOLUME
Briefly press the
key. The ‘VOL’ level will flash. Press the
or
keys to select the required volume level. The volume can be adjusted from 0 to 9 with 0 being minimum and 9 being maximum volume.
SQUELCH
Press and hold the
key until the ‘SQL’ level flashes. Press
the or
keys to select the required squelch level. The squelch can be adjusted from 0 to 9 with 0 being minimum (open squelch) and 9 being maximum (full squelch).
SELECTING CHANNELS
Briefly press the
or
keys to select individual channels. Press and hold the or keys to step quickly through the channels. Release the keys when the required channel is displayed.
TRANSMITTING
To transmit, press the PTT button. Hold the radio about 5cm from your mouth and speak into the microphone in a normal voice.
When you have finished talking, release the PTT button.
When transmitting the ‘TX’ indicator appears on the display.
TRANSMIT TIME-OUT
The radio has a built-in time out timer that automatically limits transmissions to a maximum of 5 minutes of continuous operation. This feature is required to prevent accidental blocking of the frequency should your PTT switch become jammed or be otherwise pressed accidentally.
When the time out timer activates, the transmission will stop, and the radio will return to receive mode. Normal operation will be restored once the PTT is released.
HIGH/LOW POWER
Briefly press the
key to switch the transmitter power between HIGH power (5 watts) or LOW power (1 watt) on the selected channel. The corresponding ‘HI’ or ‘LO’ icon will be displayed on the LCD.
NOTE: Some channels may be permanently restricted to Low
or High power. Pressing the
key on these channels will
result in an error beep.
BACK LIGHT
The back light turns on automatically when any key (except the PTT) is pressed. The back-light will remain on for 6 seconds then will switch off if no further keys are pressed.
NOTE: If the back light is on, pressing the PTT will switch it off.
PRIORITY CHANNEL 16
Press the
key to jump immediately to emergency channel
16. ‘P’ is displayed to indicate Priority channel. Whenever 16 is selected the TX power setting is set to HI and all other functions (Scan, Dual Watch and Triple Watch) are cancelled.
Briefly press the
key again to return to the previously
selected channel or press the or
keys to select the
next channel in sequence.
SECOND PRIORITY CHANNEL
The GX625 has a second priority channel. The second priority channel can be user-programmed to any of the standard marine channels.
To program your preferred channel into the second priority channel;
1. Press and hold the
key. The radio will switch to the channel currently stored in the second priority channel memory and ‘P’ will be displayed.
2. Press and hold the
key again. ‘P’ will disappear and the channel number will flash rapidly.
3. Select the required channel using the
or
keys.
4. Press and hold the
key again to store the displayed channel as your new second priority channel.
To select the second priority channel at any time, press and hold the
key. The radio will switch to the second priority
channel and ‘P’ will be displayed.
LOCK KEY
The
key is also used to lock the keypad to prevent accidental key presses from changing the settings. When locked, all keys except the PTT and keys are disabled and pressing any of the keys will result in an error beep.
Page 8
8
To lock the keypad, press and hold the key until a beep is
heard. The
icon will appear on the LCD.
To restore the keypad press and hold the
key until a beep
is heard. The
icon will disappear on the LCD.
CHANNEL SET (UIC BAND)
The GX625 supports the International, USA and Canadian channel sets. When operating outside the USA or Canada the International channel-set should be selected.
To select the desired channel-set, press and hold the
key. The radio will beep and the selected channel-set icon will be displayed below the channel display. Each press and hold of the
key will step to the next channel set in sequence.
= USA, = International, = Canada
WEATHER CHANNELS
(USA and Canada Channels Only)
Briefly press the
key to enter the WX (weather) mode.
Press the or
keys to select the required
WX channel.
Briefly press the
key again to return to normal channels.
BEEP ADJUSTMENT
By default, the radio will beep whenever a key is pressed. If you prefer, you can choose to disable the beep.
To switch the beeps off, first switch off the radio, then hold the
key while switching the radio. The key beep will be
disabled.
To restore the beeps, switch off the radio then hold the key while switching the radio on. The beeps will be re-enabled.
MEMORY CHANNELS
The memory function allows you to store specific channels into memory for easy access.
Adding channels to the memory:
1. During the normal mode, select the desired channel for
programming using the
or
keys.
2. Press and hold the
key to store the selected channel as a memory channel. The ‘M’ icon indicates the current channel has been saved in the memory.
3. Repeat to add other channels.
You can store as many channels as you wish into the memory.
NOTE: Separate memories exist for the USA, International, and
Canadian Frequency bands.
Deleting channels from the memory:
1. During the normal mode, use the
or
keys to
select the channel to be deleted.
2. Press and hold the
key to delete the selected channel
from the memory. The ‘M’ icon will disappear.
3. Repeat to delete other channels.
Accessing memory channels
1. Press the
key to enter the memory mode.
‘MEM’ is displayed.
2. Use the
or
keys to select the required
memory channel.
3. To exit the memory mode, press the
key again.
‘MEM’ disappears from the display.
For details on scanning the memory channels, refer to the Scanning section below.
SCANNING
The scan function allows the radio to scan channels for signals. When a signal is detected the scan pauses to allow the signal to be heard. Once the signal has gone the scan resumes.
There are 4 Scan modes available – All Scan, Memory Scan, Priority All Scan and Priority Memory Scan.
All-Scan
The All Scan function allows the radio to scan all the available channels for signals.
1 - 2 - 3 - 4 . . . 86 - 87 - 88
To activate All-Scan, briefly press the
key while in the normal mode. ‘SCAN’ appears on the display and the channel numbers change rapidly as the radio scans for signals.
To deactivate the All-Scan function, briefly press the
key
again. ‘SCAN’ disappears from the display.
Memory-Scan
The Memory-Scan function allows the radio to scan all the channels stored in the memory for signals.
Page 9
9
M1 - M2 - M3 - M4 ... M86 - M87 - M88
Before scanning, press the key to enter the memory mode. The ‘MEM’ icon will be displayed. There should be at least one channel in the memory (please refer to the MEMORY CHANNELS section above).
To activate the Memory-Scan, press the
key. ‘SCAN’ appears on the display and the channel numbers change rapidly as the radio scans the channels programmed into the memory for signals.
To deactivate the Memory-Scan, briefly press the
key
again. ‘SCAN’ disappears from the display. Press the
key
to exit the memory mode. The ‘MEM’ icon will disappear.
Priority All-Scan
The Priority All-Scan function scans all the available channels for signals while inserting CH16 into the scan every second channel.
1 - 16 - 2 - 16 ... 87 - 16 - 88 - 16
To activate the Priority All-Scan, press and hold the
key while in the normal mode. ‘PSCAN’ appears on the display and the channel numbers change rapidly as the radio scans for signals.
To deactivate the Priority All-Scan function, briefly press the
key again. ‘PSCAN’ disappears from the display.
Priority Memory-Scan
The Priority Memory-Scan function allows the radio to scan all the channels stored in the memory for signals while inserting CH16 into the scan every second channel.
1 - 16 - 2 - 16 ... 87 - 16 - 88 - 16
Before scanning, press the key to enter the memory mode. The ‘MEM’ icon will be displayed. There should be at least one channel in the memory (please refer to the MEMORY CHANNELS section on the previous page).
To activate the Priority Memory-Scan, press and hold the key. ‘SCAN’ appears on the display and the channel numbers change rapidly as the radio scans the memory channels for signals.
To deactivate the Priority Memory-Scan, briefly press the key again. ‘SCAN’ disappears from the display. Press the
key to exit the memory mode.
DUAL WATCH
The Dual Watch function is a 2 channel scan feature where the radio switches between Channel 16 and any other selected channel. This allows you to monitor a working or club channel while still being able to receive important broadcasts on Channel 16.
To use the Dual Watch function;
1. Press the
or
keys to select your preferred
working channel.
2. Briefly press the
key to activate Dual Watch. ‘DW’ will be displayed and the channel number will quickly alternate between 16 and the selected channel.
• If a signal is received on the selected channel, the Dual Watch will pause on the selected channel to allow the signal to be heard but will continue to monitor channel 16 every 2 seconds resulting in short breaks in the conversation. Once the signal has gone, Dual Watch continues.
• If a signal appears on channel 16 the radio will lock onto channel 16 and signals on channel 16 will have priority over any signals on the selected channel.
3. To cancel Dual Watch, briefly press the
key.
TRIPLE WATCH
The Triple Watch function is a 3 channel scan feature where the radio switches between Channel 16, your selected channel and a second priority channel. This allows you to monitor 2 channels while still being able to receive important broadcasts on Channel 16.
NOTE: Prior to using Triple Watch you will need to have
programmed your second priority channel (see Second Priority Channel further above).
To use the Triple Watch Function
1. Ensure you have programmed your second priority channel on the
key (see ‘Second Priority Channel’ on page 7).
2. Press the
or
keys to select your preferred
working channel.
Page 10
10
3. Press and hold the
key to activate Triple Watch. ‘TW’ will be displayed and the channel numbers will quickly switch between the three channels (16, the second priority channel and the selected channel).
• If a signal is received on either the selected channel or the second priority channel, the Triple Watch will pause to allow the signal to be heard but will continue to monitor
channel 16 every 2 seconds resulting in short breaks in the conversation. Once the signal has gone, Triple Watch continues.
• If a signal appears on channel 16 it will take priority over any signals on the other two channels.
4. To cancel Triple Watch, briefly press the
key.
CHANNEL LISTS
INTERNATIONAL MARINE VHF CHANNELS AND FREQUENCIES
CH TX Freq RX Freq Simplex Usage
01 156.050 160.650 Public Correspondence, Port Operations and Ship Movement 02 156.100 160.700 Public Correspondence, Port Operations and Ship Movement 03 156.150 160.750 Public Correspondence, Port Operations and Ship Movement 04 156.200 160.800 Public Correspondence, Port Operations and Ship Movement 05 156.250 160.850 Public Correspondence, Port Operations and Ship Movement 06 156.300 156.300 x Inter-ship [1] 07 156.350 160.950 Public Correspondence, Port Operations and Ship Movement 08 156.400 156.400 x Inter-ship 09 156.450 156.450 x Inter-ship, Port Operations and Ship Movement 10 156.500 156.500 x Inter-ship, Port Operations and Ship Movement [2] 11 156.550 156.550 x Port Operations and Ship Movement 12 156.600 156.600 x Port Operations and Ship Movement 13 156.650 156.650 x Inter-ship Safety, Port Operations and Ship Movement [3] 14 156.700 156.700 x Port Operations and Ship Movement 15 156.750 156.750 x Inter-ship and On-board Communications at 1W only [4] 16 156.800 156.800 x Distress, Safety and Calling 17 156.850 156.850 x Inter-ship and On-board Communications at 1W only [4] 18 156.900 161.500 Public Correspondence, Port Operations and Ship Movement 19 156.950 161.550 Public Correspondence, Port Operations and Ship Movement 1019 156.950 156.950 x New Simplex channel (for release 2017) 2019 161.550 161.550 x New Simplex channel (for release 2017) 20 157.000 161.600 Public Correspondence, Port Operations and Ship Movement 1020 157.000 157.000 x New Simplex channel (for release 2017) 2020 161.600 161.600 x New Simplex channel (for release 2017) 21 157.050 161.650 Public Correspondence, Port Operations and Ship Movement 22 157.100 161.700 Public Correspondence, Port Operations and Ship Movement 23 157.150 161.750 Public Correspondence, Port Operations and Ship Movement 24 157.200 161.800 Public Correspondence, Port Operations and Ship Movement 25 157.250 161.850 Public Correspondence, Port Operations and Ship Movement
Page 11
11
CH TX Freq RX Freq Simplex Usage
26 157.300 161.900 Public Correspondence, Port Operations and Ship Movement 27 157.350 161.950 Public Correspondence, Port Operations and Ship Movement 28 157.400 162.000 Public Correspondence, Port Operations and Ship Movement 60 156.025 160.625 Public Correspondence, Port Operations and Ship Movement 61 156.075 160.675 Public Correspondence, Port Operations and Ship Movement 62 156.125 160.725 Public Correspondence, Port Operations and Ship Movement 63 156.175 160.775 Public Correspondence, Port Operations and Ship Movement 64 156.225 160.825 Public Correspondence, Port Operations and Ship Movement 65 156.275 160.875 Public Correspondence, Port Operations and Ship Movement 65A 156.275 156.275 Non-Commercial 66 156.325 160.925 Public Correspondence, Port Operations and Ship Movement 66A 156.325 156.325 Non-Commercial 67 156.375 156.375 x Inter-ship, Port Operations and Ship Movement [2] 68 156.425 156.425 x Port Operations and Ship Movement 69 156.475 156.475 x Inter-ship, Port Operations and Ship Movement 71 156.575 156.575 x Port Operations and Ship Movement 72 156.625 156.625 x Inter-ship 73 156.675 156.675 x Inter-ship [2] 74 156.725 156.725 x Port operations and Ship movement 75 156.775 156.775 x See Note [5] 76 156.825 156.825 x See Note [5] 77 156.875 156.875 x Inter-ship 78 156.925 161.525 Public correspondence, Port Operations and Ship Movement 1078 156.925 156.925 x New Simplex channel (for release 2017) 2078 161.525 161.525 x New Simplex channel (for release 2017) 79 156.975 161.575 Public correspondence, Port Operations and Ship Movement 1079 156.975 156.975 x New Simplex channel (for release 2017) 2079 161.575 161.575 x New Simplex channel (for release 2017) 80 157.025 161.625 Public correspondence, Port Operations and Ship Movement 81 157.075 161.675 Public correspondence, Port Operations and Ship Movement 82 157.125 161.725 Public correspondence, Port Operations and Ship Movement 83 157.175 161.775 Public correspondence, Port Operations and Ship Movement 84 157.225 161.825 Public correspondence, Port Operations and Ship Movement 85 157.275 161.875 Public correspondence, Port Operations and Ship Movement 86 157.325 161.925 Public correspondence, Port Operations and Ship Movement 87 157.375 157.375 x Port Operations and Ship Movement 88 157.425 157.425 x Port Operations and Ship Movement
Page 12
12
• Inter-ship channels are for communications between ship stations. Inter-ship communications should be restricted to Channels 6, 8, 72 and 77. If these are not available, the other channels marked for Inter-ship may be used.
• Channel 70 is used exclusively for Digital Selective Calling (DSC) and is not available for regular voice communications.
Notes:
[1] Channel 06 may also be used for communications between
ship stations and aircraft engaged in coordinated search and rescue operations. Ship stations should avoid harmful interference to such communications on channel 06 as well as to communications between aircraft stations, ice breakers and assisted ships during ice seasons.
[2] Within the European Maritime Area and in Canada,
channels 10, 67 and 73 may also be used by the individual administrations concerned for communication between
ship stations, aircraft stations and participating land stations engaged in coordinated search and rescue and anti-pollution operations in local areas. Channels 10 or 73 (depending on location) are also used for the broadcast of Marine Safety Information by the Maritime and Coast Guard Agency in the UK only.
[3] Channel 13 is designated for use on a worldwide basis as
a navigation safety communication channel, primarily for inter-ship navigation safety communications.
[4] Channels 15 and 17 may also be used for on-board
communications provided the effective radiated power does not exceed 1 watt.
[5] The use of Channels 75 and 76 should be restricted to
navigation related communication only and all precautions should be taken to avoid harmful interference to channel
16. Transmit power is limited to 1 watt.
U.S. MARINE VHF CHANNELS AND FREQUENCIES
CH TX Freq RX Freq Simplex Usage
01A 156.050 156.050 x Port Operations and Commercial, VTS. Available only in New Orleans / Lower
Mississippi area. 03A 156.150 156.150 x U.S. Government only 05A 156.250 156.250 x Port Operations or VTS in the Houston, New Orleans and Seattle areas. 06 156.300 156.300 x Inter-ship Safety 07A 156.350 156.350 x Commercial 08 156.400 156.400 x Commercial (Inter-ship only) 09 156.450 156.450 x Boater Calling. Commercial and Non-Commercial. 10 156.500 156.500 x Commercial 11 156.550 156.550 x Commercial. VTS in selected areas. 12 156.600 156.600 x Port Operations. VTS in selected areas. 13 156.650 156.650 x Inter-ship Navigation Safety (Bridge-to-bridge). Ships >20meters in length maintain a
listening watch on this channel in US waters. 14 156.700 156.700 x Port Operations. VTS in selected areas. 15 156.750 x Environmental (Receive only). Used by Class ‘C’ EPIRBs. 16 156.800 156.800 x International Distress, Safety and Calling. Ships required to carry radio, USCG, and
most coast stations maintain a listening watch on this channel. 17 156.850 156.850 x State Control 18A 156.900 156.900 x Commercial 19A 156.950 156.950 x Commercial 20 157.000 161.600 Port Operations (duplex) 20A 157.000 157.000 x Port Operations 21A 157.050 157.050 x U.S. Coast Guard only
Page 13
13
CH TX Freq RX Freq Simplex Usage
22A 157.100 157.100 x Coast Guard Liaison and Maritime Safety Information Broadcasts. Broadcasts
announced on channel 16.
23A 157.150 157.150 x U.S. Coast Guard only 24 157.200 161.800 Public Correspondence (Marine Operator) 25 157.250 161.850 Public Correspondence (Marine Operator) 26 157.300 161.900 Public Correspondence (Marine Operator) 27 157.350 161.950 Public Correspondence (Marine Operator) 28 157.400 162.000 Public Correspondence (Marine Operator) 61A 156.075 156.075 x U.S. Government only 63A 156.175 156.175 x Port Operations and Commercial, VTS. Available only in New Orleans / Lower
Mississippi area.
64A 156.225 156.225 x U.S. Coast Guard only 65A 156.275 156.275 x Port Operations 66A 156.325 156.325 x Port Operations 67 156.375 156.375 x Commercial. Used for Bridge-to-bridge communications in lower Mississippi River.
Inter-ship only.
68 156.425 156.425 x Non-Commercial 69 156.475 156.475 x Non-Commercial 71 156.575 156.575 x Non-Commercial 72 156.625 156.625 x Non-Commercial (Inter-ship only) 73 156.675 156.675 x Port Operations 74 156.725 156.725 x Port Operations 77 156.875 156.875 x Port Operations (Inter-ship only) 78A 156.925 156.925 x Non-Commercial 79A 156.975 156.975 x Commercial. Non-Commercial in Great Lakes only. 80A 157.025 157.025 x Commercial. Non-Commercial in Great Lakes only 81A 157.075 157.075 x U.S. Government only – Environmental protection operations. 82A 157.125 157.125 x U.S. Government only 83A 157.175 157.175 x U.S. Coast Guard only 84 157.225 161.825 Public Correspondence (Marine Operator) 84A 157.225 157.225 Non-Commercial 85 157.275 161.875 Public Correspondence (Marine Operator) 85A 157.275 157.275 Non-Commercial
86 157.325 161.925 Public Correspondence (Marine Operator) 86A 157.325 157.325 Non-Commercial 87 157.375 161.975 Public Correspondence Marine Operator) 87A 157.375 157.375 Non-Commercial 88 157.425 162.025 Public Correspondence only near Canadian border 88A 157.425 157.425 x Commercial, Inter-ship only
Page 14
14
• Recreational boaters normally use channels listed as Non-
Commercial: 68, 69, 71, 72, 78A.
• Channel 70 is used exclusively for Digital Selective
Calling (DSC) and is not available for regular voice communications.
• Channels 75 and 76 are reserved as guard bands for Channel 16 and are not available for regular voice communications.
WEATHER CHANNELS
WX1 162.550 WX2 162.400 WX3 162.475 WX4 162.425 WX5 162.450 WX6 162.500 WX7 162.525 WX8 161.650 WX9 161.775
WX10 163.275
CANADIAN MARINE VHF CHANNELS AND FREQUENCIES
CH TX Freq RX Freq Simplex Usage
01 156.050 160.650 PC Public Correspondence 02 156.100 160.700 PC Public Correspondence 03 156.150 160.750 PC Public Correspondence 04A 156.200 156.200 PC Inter-ship, Ship/Shore and Safety: Canadian Coast Guard S&R 05A 156.250 156.250 Ship Movement 06 156.300 156.300 All areas Inter-ship, Commercial, Non-commercial and Safety: May Be used for search
and rescue communications between ships and aircraft. 07A 156.350 156.350 All areas Inter-ship, Ship/Shore, Commercial 08 156.400 156.400 WC, EC Inter-ship, Commercial and Safety: Also assigned for operations in the Lake
Winnipeg area. 09 156.450 156.450 AC Inter-ship, Ship/Shore, Commercial, Non-commercial and Ship Movement: May be
used to communicate with aircraft and Helicopters in predominantly maritime support
operations. 10 156.500 156.500 AC, GL Inter-ship, Ship/Shore, Commercial, Non-commercial, Safety and Ship
Movement: May also be used for communications with aircraft engaged in
coordinated search and rescue and antipollution operations. 11 156.550 156.550 PC, AC, GL Inter-ship, Ship/Shore, Commercial, Non-commercial and Ship Movement:
Also used for pilotage purposes.
12 156.600 156.600 WC, AC, GL Inter-ship, Ship/Shore, Commercial, Non-commercial and Ship Movement:
Port operations and pilot information and messages.
13 156.650 156.650 All areas Inter-ship, Commercial, Non-commercial and Ship Movement: Exclusively for
bridge-to-bridge navigational traffic. Limited to 1-watt maximum power.
Page 15
15
CH TX Freq RX Freq Simplex Usage
14 156.700 156.700 AC, GL Inter-ship, Ship/Shore, Commercial, Non-commercial and Ship Movement:
Port operations and pilot information and Messages. 15 156.750 156.750 All areas Inter-ship, Ship/Shore, Commercial, Non-commercial and Ship Movement:
All May also be used for on-board Communications. 16 156.800 156.800 All areas International Distress, Safety and Calling. 17 156.850 156.850 All areas Inter-ship, Ship/Shore, Commercial, Non-commercial and Ship Movement:
All operations limited to 1-watt maximum power. May also be used for on-board
Communications. 18A 156.900 156.900 All areas Inter-ship, Ship/Shore and Commercial: Towing on the Pacific Coast. 19A 156.950 156.950 All areas except PC Inter-ship and Ship/Shore: Canadian Coast Guard only. 20 157.000 161.600 All areas Ship/Shore, Safety and Ship Movement: Port operation 21A 157.050 157.050 All areas Inter-ship and Ship/Shore: Canadian Coast Guard only. 21B 161.650 All areas Safety: Continuous Marine Broadcast (CMB) service. 22A 157.100 157.100 All areas Inter-ship, Ship/Shore, Commercial and Non-commercial: For communications
between Canadian Coast Guard and non-Canadian Coast Guard stations only. 23 157.150 161.750 PC Ship/Shore and Public Correspondence: Also in the inland waters of British Columbia
and the Yukon.
23B 161.750 Continuous Marine Broadcast Service 24 157.200 161.800 All areas Ship/Shore and Public Correspondence 25 157.250 161.850 PC Ship/Shore and Public Correspondence: Also assigned for operations in the Lake
Winnipeg area. 25B 161.850 AC Safety: Continuous Marine Broadcast (CMB) service. 26 157.300 161.900 All areas Ship/Shore, Safety and Public Correspondence 27 157.350 161.950 AC, GL, PC Ship/Shore and Public Correspondence 28 157.400 162.000 PC Ship/Shore, Safety and Public Correspondence 28B 162.000 AC Safety: Continuous Marine Broadcast (CMB) service. 60 156.025 160.625 PC Ship/Shore and Public Correspondence. 61A 156.075 156.075 EC Inter-ship, Ship/Shore and Commercial: Commercial fishing only. 62A 156.125 156.125 EC Inter-ship, Ship/Shore and Commercial: Commercial fishing only. 63A 156.175 156.175 Tow Boats - BCC area 64 156.225 160.825 PC Ship/Shore and Public Correspondence 64A 156.225 156.225 EC Inter-ship, Ship/Shore and Commercial: Commercial fishing only. 65A 156.275 156.275 Inter-ship, Ship/Shore, Commercial, Non-commercial, Safety: Search & rescue and
antipollution operations on the Great Lakes. Towing on the Pacific Coast. Port
operations only in the St. Lawrence River areas with 1W maximum power. Pleasure craft
in the inland waters of Alberta, Saskatchewan and Manitoba (excluding Lake Winnipeg
and the Red River). 66A 156.325 156.325 Inter-ship, Ship/Shore, Commercial, Non-commercial, Safety and Ship Movement:
Port operations only in the St.Lawrence River/Great Lakes Areas with 1-watt maximum
power. 67 156.375 156.375 All areas except EC Inter-ship, Ship/Shore, Commercial, Non-commercial, Safety:
May also be used for communications with aircraft engaged in coordinated search and
rescue and antipollution operations.
Page 16
16
CH TX Freq RX Freq Simplex Usage
68 156.425 156.425 All areas Inter-ship, Ship/Shore and Non-commercial: For marinas and yacht clubs. 69 156.475 156.475 All areas except EC Inter-ship, Ship/Shore, Commercial and Non-commercial 71 156.575 156.575 PC Inter-ship, Ship/Shore, Commercial, Non-commercial, Safety and Ship Movement the
East Coast and on Lake Winnipeg. 72 156.625 156.625 EC, PC Inter-ship, Commercial and Non-commercial: May be used to communicate with
aircraft and helicopters in predominantly maritime support 73 156.675 156.675 All areas except EC Inter-ship, Ship/Shore, Commercial, Non-commercial, Safety:
May also be used for communications with aircraft engaged in coordinated search and
rescue and antipollution operations. 74 156.725 156.725 EC, PC Inter-ship, Ship/Shore, Commercial, Non-commercial and Ship Movement. 75 156.775 156.775 Simplex port operation, Ship movement and navigation related communication only.
1 watt maximum 76 156.825 156.825 Simplex port operation, Ship movement and navigation related communication only.
1 watt maximum 77 156.875 156.875 Inter-ship, Ship/Shore, Safety and Ship Movement: Pilotage on Pacific Coast. Port
operations only in the St. Lawrence River/Great Lakes areas with 1W maximum power. 78A 156.925 156.925 EC, PC Inter-ship, Ship/Shore and Commercial
79A 156.975 156.975 EC, PC Inter-ship, Ship/Shore and Commercial 80A 157.025 157.025 EC, PC Inter-ship, Ship/Shore and Commercial 81A 157.075 157.075 Inter-ship and Ship/Shore: Canadian Coast Guard use only in the St. Lawrence River/
Great Lakes areas. 82A 157.125 157.125 Inter-ship and Ship/Shore: Canadian Coast Guard use only in the St. Lawrence River/
Great Lakes areas. 83A 157.175 157.175 EC Inter-ship and Ship/Shore: Canadian Coast Guard and other Government agencies. 83B 161.775 AC, GL Safety: Continuous Marine Broadcast (CMB) Service. 84 157.225 161.825 PC Ship/Shore and Public Correspondence 85 157.275 161.875 AC, GL, NL Ship/Shore and Public Correspondence 86 157.325 161.925 PC Ship/Shore and Public Correspondence 87 157.375 161.975 AC, GL, NL Ship/Shore and Public Correspondence 88 157.425 162.025 AC, GL, NL Ship/Shore and Public Correspondence
AC: Atlantic Coast, Gulf and St. Lawrence River up to and
including Montreal
EC (East Coast): includes NL, AC, GL and Eastern Arctic areas
GL: Great Lakes (including St. Lawrence above Montreal)
NL: Newfoundland and Labrador
PC: Pacific Coast
WC (West Coast): Pacific Coast, Western Arctic and
Athabasca-Mackenzie Watershed areas
All areas: includes East and West Coast areas
WEATHER CHANNELS
WX1 162.550 WX2 162.400 WX3 162.475 WX4 162.425 WX5 162.450 WX6 162.500 WX7 162.525 WX8 161.650 WX9 161.775
WX10 163.275
Page 17
17
SPECIFICATIONS
GENERAL
Frequency Range: 156.025 to 163.275 MHz
Oscillator: PLL
Modulation: FM
Channel Spacing: 25 kHz
Frequency Stability: ±5 PPM
Standard Operating Temperature: -20°C ~ +55°C
Nominal Working Voltage: 7.4 V DC (with Li-Ion battery)
Battery Life (5% TX, 5% RX, 90% Stby): ≥8 Hrs
Antenna Socket: SMA
Built in Speaker: 40 mm Diameter, 8 Ohms
Dimensions: 67 (W) x 153 (H) x 43 (D) mm
Weight: 297 grams
Battery: 7.4 V @ 1200 mAh Li-Ion
DC Charger: 12 V DC @ 1 Amp
Charging Current: 450 mA ± 50 mA
Water resistant: IP66
RECEIVER
Sensitivity (12dB SINAD): -119 dBm
Squelch: Threshold: -119 dBm
Tight: -113 dBm to -107 dBm
Rated Audio Output @5% THD Speaker: 250 mW
Adjacent Channel Rejection: ≥ 70 dB
Image Rejection: ≥ 70 dB
Intermodulation Rejection: ≥ 68 dB
Maximum S/N @ 1 mV: ≥ 40 dB
Spurious Response rejection (CH16): ≥ 70 dB
Conducted Spurious Emission: ≤ 70 dB
Scan Time per Channel: 200 ms
RX Current: Standby – 185 mA
Max Audio Power – 380 mA
TRANSMITTER
Output Power: High – 5W
Low – 0.8W
Frequency Tolerance: ± 5 PPM
Max Modulation: ± 5 kHz
Conducted Spurious Emission: ≤ -56 dB
Audio Distortion @ 3 kHz Dev: < 5%w
Conducted Spurious Emission: ≤ -56 dB
TX Current: High Power – 1.6 A
Low Power – 0.9 A
Specifications are nominal and are subject to change without notice or obligation.
Page 18
18
STANDARD COMMUNICATIONS WARRANTY AGAINST DEFECTS
This warranty against defects is given by Standard Communications Pty Ltd ACN 000 346 814 (We, us, our or GME). Our contact details are set out in clause 2.7. This warranty statement only applies to products purchased in Australia. Please contact your local GME distributor for products sold outside of Australia. Local distributor details at: www.gme.net.au/export.
1. Consumer guarantees
1.1 Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
1.2 To the extent we are able, we exclude all other conditions,
warranties and obligations which would otherwise be implied.
2. Warranty against defects
2.1 This warranty is in addition to and does not limit, exclude or
restrict your rights under the Competition and Consumer Act 2010 (Australia) or any other mandatory protection laws that may apply.
2.2 We warrant our goods to be free from defects in materials and
workmanship for the warranty period (see warranty table) from the date of original sale (or another period we agree to in writing). Subject to our obligations under clause 1.2, we will at our option, either repair or replace goods which we are satisfied are defective. We warrant any replacement parts for the remainder of the period of warranty for the goods into which they are incorporated.
2.3 To the extent permitted by law, our sole liability for breach of a
condition, warranty or other obligation implied by law is limited.
(a) In the case of goods we supply, to any one of the following as
we decide –
(i) The replacement of the goods or the supply of equivalent
goods. (ii) The repair of the goods. (iii) The cost of repairing the goods or of acquiring equivalent
goods.
(b) In the case of services we supply, to any one of the following
as we decide – (i) The supplying of the services again (ii) The cost of having the services supplied again.
2.4 For repairs outside the warranty period, we warrant our repairs
to be free from defects in materials and workmanship for three months from the date of the original repair. We agree to re-repair or replace (at our option) any materials or workmanship which we are satisfied are defective.
2.5 We warrant that we will perform services with reasonable care
and skill and agree to investigate any complaint regarding our services made in good faith. If we are satisfied that the complaint is justified, and as our sole liability to you under this warranty (to
the extent permitted at law), we agree to supply those services again at no extra charge to you.
2.6 To make a warranty claim you must before the end of the applicable warranty period (see warranty table), at your own cost, return the goods you allege are defective, provide written details of the defect, and give us an original or copy of the sales invoice or some other evidence showing details of the transaction.
2.7 Send your claim to:
Standard Communications Pty Ltd. 17 Gibbon Rd, Winston Hills, NSW 2153, Australia. Tel: (02) 8867 6000 Fax: (02) 8867 6199. Email: servadmin@gme.net.au
2.8 If we determine that your goods are defective, we will pay for
the cost of returning the repaired or replaced goods to you, and reimburse you for your reasonable expenses of sending your warranty claim to us.
3. What this warranty does not cover
3.1 This warranty will not apply in relation to:
(a) Goods modified or altered in any way. (b) Defects and damage caused by use with non Standard
Communications products. (c) Repairs performed other than by our authorised representative. (d) Defects or damage resulting from misuse, accident, impact or
neglect. (e) Goods improperly installed or used in a manner contrary to the
relevant instruction manual; or (f) Goods where the serial number has been removed or made
illegible.
4. Warranty period
4.1 We provide the following warranty on GME and Kingray products.
No repair or replacement during the warranty period will renew or extend the warranty period past the period from original date of purchase.
PRODUCT TYPE
WARRANTY PERIOD
27 MHz and VHF marine radios 1 year
Page 19
Loading...