TWS11
TWS(true wireless stereo)earphones
V5.0
Manual
Specifications:
True wireless stereo (TWS), real no wires design, individual left and right
channel, HIFI sound, both the left and right earbud are Bluetooth enabled,
could be used separately, or used as one pair.
About pairing:
1. Pairing with one earbud: Long press the Multi-Function button until the LED
flashing in red and blue alternately, then turn on the Bluetooth on your device
and select “ TWS ” on your list, (there would be reminding voice saying
connected), then you could enjoy music or making phones calls. It supports
reporting incoming calls.
2.
Pairing with both sides:
A. Long press the multi-function buttons of both sides at the same time until the
led flashing in red a
nd blue alternately, then double click EITHER side to enter
pairing mode, (there would be reminding voice "ready to pair") then turn on the
Bluetooth on your device and choose “ TWS ” to connect. When the led flash
slowly in blue (3-5s) , they pair successfully with voice.
Note: The call support both side Bluetooth earphone,shut down,play and
suspension can be controlled by any one of the multi-function keys connected
earphone,and another headset will be synchronized control. The boot will be
directly long press the multi-function button to turn on automatically back at
the next time.
Bluetooth usage:
1.
Making phone calls:
Be sure the earphone connected with your mobile phone, and then you can
make phone calls. When making calls, both sides earphone working, and there
is incoming call, it would broadcast calling numbers. You answer the call by
slightly press the power button one time and refuse to answer by long press
the power button 2 seconds. Click the button 3 times to redial last number.
2. Voice control
When the earphones are in music mode, you can enter voice control by quick
press the power button 2 times.
3.
Listening to music:
Be sure the earphone connected with your mobile phone, then you can listen to
music on your music list. Shortly press the power button to stop the music and
replay by press again. Long press right earphone to play next song, long press left
earphone to play previous song.
4.
Power off.
Long press the power button until led in red when not use, the Bluetooth
device enter off mode. lt would be power off aut
omatically when the earphone
away from your Bluetooth device over 5 minutes. No need to worry power
exhausted.
5.
Charging:
There is reminding sound when battery is low, and the led would flash in red at
the same time. When taking charge, the led would be in red, and turns in blue
when fully charged.
Note:the earphone would be forced to shut down when charging even if they
are power ON before charging.
Warnings:
1. Please do not overuse this earphone or put it under heavy pressure,
Please do not overuse this earphone or put it under heavy pressure,
keep away from wet and heat.
2. Keep away from WIFI, router or other high frequency transmitting
equipment to prevent interruption of signal receiving.
3.
4.
Please use this earphone under its working range (10meters), and the
effect would be better if there is no obstacle between the connected
devices.
Use this Bluetooth earphone to connect any device with Bluetooth
function
2
3
4
5
6
Summary
Dust-proof mesh
Multi-function button
MIC
Charging port
Charging Box Light
Android Charging port
Bluetooth version:
V5.0 (both sides), ultra low consumption
Bluetooth Mode:
A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3.
Bluetooth Frequency: 2.4GHZ
Bluetooth Range: 12 meters with no obstacles
Battery capacity:
Earbud: 50mah rechargeable Li-ion battery
Charging dock:400mah (optional)
Talk/Play time:
Single earbud mode:4-5 hours
One Pair earbuds mode:3-4 hours
Standby time:
Single earbud mode:100 hours
One Pair earbuds mode:60 hours
1
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
NOTE:
Loading...