Glastender BB24, BB24-N1-LLR-R User Manual
Project:
Item #: Qty:
Model #:
24" Back Bar Cooler
One Door Remote
BB24-N _-_ _ R(_)
AIA#
SIS#
BB24-N1-LLR(R)
COMPONENT
Standard Features
• Remote unit
• All stainless steel interior construction with radius inte
rior corners
• CFC free foamed-in-place insulation
• Galvanized steel sub-top
• Black vinyl-clad steel exterior front and sides
Specications
Electrical
• 120V, 1 phase, 60 Hz
• Dedicated 15 amp circuit is required
• 14 gauge wire connection is made inside the cooler next
to evaporator housing
Refrigeration
• R134a or R404a expansion valve & temperature control
included. Specify type required when ordering.
• Recommended condensing unit is 1/4 HP which has an
approximate rating of 1,530 BTU/H at +20ºF evaporator
temperature
• All refrigeration hookups are made at the installation site
Plumbing
• A ten foot length of 1/2" ID by 5/8" OD plastic tubing is
provided to drain condensate. The tubing should exit
through one of the 3/4" side knock-out holes (installer’s
choice). The maximum drainage is one ounce per hour -
consult local codes for compliance - a floor drain may be
required
Shelving
• Two adjustable coated shelves and one bottom coated rack
per door included
Base Height:
1 = 1"
6 = 6" Legs
Door Style:
B = Black vinyl-clad
U = Unlaminated
L = Laminated
S = Stainless
G = Glass
X = Stainless Glass
Y = Laminated Glass
NSF standard 7 listed for open food storage
Door Hinge Location:
L = Left or R = Right
Top Style:
N = No finished top
L = Laminated
S = Stainless
• Stainless steel evaporator housing with separate removable
-
evaporator drain pan
• Stainless steel die cast handle
• Leg sockets recessed into base
• 1/2" thick ABS plastic threshold scuff plate
• 180º swinging doors
Capacity
• 5 cases of long neck bottle beer
Legs
• 1-5/8" diameter
• Stainless steel bullet feet
Materials
• 22 gauge stainless steel parts include: interior floor, walls, ceiling,
front of cabinet, and evaporator housing
• 22 gauge black vinyl-clad parts include: sides and standard doors
• 22 gauge galvanized steel parts include: exterior sub-top and back
• 16 gauge stainless steel parts include: legs
• 16 gauge galvanized steel parts include: base
• 16 gauge zinc plated CR steel parts include: leg sockets
• 12 gauge stainless steel parts include: hinges, hinge brackets, and
lock brackets
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Specications subject to change without notice. For current specications please visit our website.
Printed in USA
4.02
Approval/Notes:
Rev. 11-16-07
One Door Remote Back Bar Cooler
35"
21"
1 1/2"
21"
24"
EVAPORATOR
HOUSING
180° SWING
35"
35"
24"
21"
30 3/4"
EVAPORATOR
HOUSING
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
48"
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
SWING WILL CONTINUE IF
NO CABINET TO IMPEDE
6"
DOOR
OPENING
21"
29 3/4"
26 3/4"
NOTE:
ELECTRICAL AND REFRIGERATION
CONNECTIONS ARE MADE INSIDE
THE COOLER BEHIND THE
EVAPORATOR HOUSING.
4 1/2" 4 1/2"
2 3/8"
22 1/2"
25 1/4"22 3/4"
25 1/4"
16 1/2"
FRONT VIEW
PLAN VIEW
STANDARD CABINET
WITH OPTIONAL 6" LEGS
180°
SWING
SIDE VIEWS
Dimensional Information
5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Printed in USA
Loading...