Glastender BB24-N1-BSN-L User Manual

A family company manufacturing in the USA

5-15P

www.glastender.com

Project:

Item #: Qty:

AIA#

SIS#

Model #:

24" Back Bar Cooler

One Door Self-Contained

BB24-N _-_ _ N(_)

BB24-N1-GSN(L)

Conforms to NSF/ANSI STD 7 and UL STD 471

Certied to CSA STD C22.2 No. 120

Meets NSF 7 requirements for closed container products

Standard Features

• Self-contained

• All stainless steel interior construction

• CFC free foamed-in-place insulation

• Galvanized steel sub-top

• Black vinyl-clad steel exterior front and sides

• Six foot grounded cord and plug (exits at rear)

• Stainless steel die cast handle with lock

Specications

4004503

Base Height:

1 = 1"
6 = 6" Legs

Door Style:

B = Black vinyl-clad
U = Unlaminated
L = Laminated
S = Stainless
G = Glass
X = Stainless Glass
Y = Laminated Glass

Door Hinge Location:

L = Left or R = Right

Top Style:

N = No finished top
L = Laminated
S = Stainless

• Automatic defrost timer

• Stainless steel evaporator housing with separate removable
evaporator drain pan

• Automatic condensate evaporator

• Leg sockets recessed into base

• 1/2" thick ABS plastic threshold scuff plate

• 180° swinging doors

Electrical

• 120V, 1 phase, 60 Hz, 3.6 full load amps

• Dedicated 15 amp circuit is required

• Includes a 6 foot NEMA 5-15P grounded cord
and plug which exits the bottom rear

Refrigeration

• 1/6 HP, R134a refrigerant

• 1,146 BTU/hr heat rejection

Operating Range

• 34°F (1°C) to 40°F (4°C)

Plumbing

• Automatic condensate evaporator. No drain connection
required.

Shelving

• Two adjustable coated shelves and one bottom coated rack
included

Capacity

• 4.6 cases of long neck bottle beer

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax [phone]
www.glastender.com

Specications subject to change without notice. For current specications please visit our website.

Printed in USA

G

W

4.01

Legs

• 1-5/8 diameter

• Stainless steel bullet feet

Materials

• 22 gauge stainless steel parts include: interior oor, walls, ceiling,
front of cabinet, and evaporator housing

• 22 gauge black vinyl-clad parts include: sides and standard door

• 22 gauge galvanized steel parts include: exterior sub-top and back

• 16 gauge stainless steel parts include: legs

• 16 gauge galvanized steel parts include: base

• 16 gauge zinc plated CR steel parts include: leg sockets

• 12 gauge stainless steel parts include: hinges, hinge brackets, and
lock brackets

Weight Bearing Capacity

• Counter tops and other accessories should not exceed 400 pounds

Approval/Notes:

Rev. 08-01-16

One Door Self-Contained Back Bar Cooler

Dimensional Information

PLAN VIEW

MINIMUM CLEARANCE FOR AIR FLOW

COMPRESSOR

COMPARTMENT

EVAPORATOR

8"

7"

1 1/2"

HOUSING

WARNING:

COMPRESSOR FAILURE DUE TO
RESTRICTION OR BLOCKAGE OF
AIR FLOW WILL VOID WARRANTY.

24"
21"

AIR FLOW

8 1/2"

10"

180° SWING

ADD 1" TO HEIGHT FOR

FACTORY INSTALLED TOP

8"

SWING WILL
CONTINUE IF
NO CABINET
TO IMPEDE

SIDE VIEWS

FRONT VIEW

29 3/4"

DOOR

OPENING

21"

ADD 1" TO HEIGHT FOR

FACTORY INSTALLED TOP

48"

35"

ADD 1" TO HEIGHT
FOR FACTORY
INSTALLED TOP

EVAPORATOR

HOUSING

25 1/4"

COMPRESSOR
COMPARTMENT

7 1/8"

30 3/4"

24"

35"

21"

24"

STANDARD CABINET

5400 North Michigan Road • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax [phone]
www.glastender.com

25 1/4"22 3/4"

180°

SWING

22 1/2"

35"

2 3/8"

4 1/2" 4 1/2"

WITH OPTIONAL 6" LEGS

6"

Printed in USA