Glastender BB24L-BL-R User Manual

A family company manufacturing in the USA

www.glastender.com

Project:

Item #: Qty:

Model #:

24" Back Bar Cooler

One Door Remote

BB24_ -_ _ (_)

AIA#

SIS#

BB24R-LL(R)

Conforms to NSF/ANSI STD 7 and UL STD 471

Certied to CSA STD C22.2 No. 120

Meets NSF 7 requirements for open food storage

4004503

Standard Features

• Remote unit

• All stainless steel interior with radius corners is easy to
keep clean

• Locking door

• LED interior lighting

Specications

Electrical

• 120V, 1 phase, 60 Hz

• Dedicated 15 amp circuit is required

• 14 gauge wire connection is made inside the cooler next
to evaporator housing

Refrigeration

• R134a or R404a expansion valve & temperature control
included. Specify type required when ordering.

• Refrigeration system capacity requirements*:

BB24 - 1,000 BTU/hr
* BTU/hr design loads are figured assuming 85° F ambient,

all glass doors, maximum internal loading, and average
compressor cycling. No solar heat gain has been

accounted for.

• All refrigeration hookups are made at the installation site

Plumbing

• A ten foot length of 1/2" ID by 5/8" OD plastic tubing is
provided to drain condensate. The tubing should exit
through one of the 3/4" side knock-out holes (installer’s
choice). The maximum drainage is one ounce per hour -
consult local codes for compliance - a floor drain may be
required

Refrigeration

Hook-Up Location:

L = Left or R = Right

Door Style:

B = Black vinyl-clad
U = Unlaminated
L = Laminated
S = Stainless
G = Glass
X = Stainless Glass
Y = Laminated Glass

Door Hinge Location:

L = Left or R = Right

Top Style:

N = No finished top
L = Laminated
S = Stainless

• Door opening may be converted to draft dispensing

• Available without a finished top for integrated installation
below customer supplied bar top

• 180° swinging door

• Leg sockets recessed into base

Shelving

• Two adjustable coated shelves and one bottom coated rack
per door included

Materials

• Stainless steel parts include: interior, front of cabinet, hinges, hinge
and lock brackets, and optional legs

• Black vinyl-clad steel parts include: standard sides and doors

• Galvanized steel parts include: exterior sub-top, back and bottom

• Zinc plated CR steel parts include: leg sockets

Weight Bearing Capacity

• Counter tops and other accessories should not exceed 400 pounds

Capacities

• 7.0 - cases long neck bottles

• 1 - 1/2 barrel kegs

• 2 - 1/6 barrel kegs

• 60 - 750ml wine bottles

Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax [phone]
www.glastender.com

Specications subject to change without notice. For current specications please visit our website.

Printed in USA

4.02

Approval/Notes:

Rev. 12-21-16

One Door Remote Back Bar Cooler

STANDARD CABINET WITH OPTIONAL 6" LEGS

PLAN VIEW

Dimensional Information

24"

20"

NOTE: Available with refrigeration
hook-up location left or right.
Use Model Number Key to specify
location when ordering.

7-7/16"

EVAPORATOR

HOUSING

180° SWING

FRONT VIEW

29-3/4"

DOOR

OPENING

20"

2"

35"

SWING WILL

CONTINUE IF

NO CABINET

TO IMPEDE

ADD 1" TO HEIGHT

FOR FACTORY

INSTALLED TOP

ADD 1" TO HEIGHT

FOR FACTORY

INSTALLED TOP

25-1/4"

6-5/8"

30-3/4"

7-7/16"

20"

24"

5400 North Michigan Road • Saginaw, MI • 48604-9780

989.752.4275 • 800.748.0423 • Fax [phone]
www.glastender.com

EVAPORATOR

35"

SIDE VIEWS

HOUSING

48"

22-3/4" 25-1/4"

180° SWING

ADD 1" TO HEIGHT

FOR FACTORY

INSTALLED TOP

22-1/2"

35"

6"

Printed in USA