GiiNii Full Size User Manual

Download

Page 1

• Before operating this product, carefully read and follow the instructions.

• Please retain this user manual for future reference.

GiiNii NuLife 2.4-inch LCD “Full Size” Photo Scanner

User Manual

Page 2

CONTENTS

SAFETY INFORMATION................................................3

PACKAGE CONTENT....................................................4

SCANNER PARTS..........................................................5

PRODUCT SETUP..........................................................6

- Connecting to Power...................................................................6

- Inserting a SD/MMC Card.............................................................7

- Turning on the Scanner.................................................................7

SCAN AND PLAYBACK.................................................8

- Scanner Setting...............................................................................8

- Using the Photo Protective Sleeve....................................................9

- Scanning Images.............................................................................9

- Playing back and Scanned Images...............................................10

- Zoom.........................................................................................11

- Playback Setting.............................................................................12

TRANSFERRING THE SCANNED IMAGES TO PC.....13

- Disconnecting the Scanner from PC...............................................13

CLEANING AND CALIBRATING THE SCANNER.......14

SPECIFICATION..........................................................16

HELPFUL HINTS.........................................................16

GiiNii 90 DAY LIMITED WARRANTY............................17

Page 3

• Retain this User Manual for future reference.

• Read the safety and operating instructions carefully before using the product. All warnings on the product and in the operating instructions should be observed.

• Do not place this product under direct sunlight or near heat sources, such as in a closed car under sunlight or near a stove. The outer casing of this product may become deformed and the sophisticated sensors inside may become damaged due to excessive heat.

• Do not use this product near water, in the rain or allow any liquid to get inside this product. Water and moisture may cause short-circuit to the electronic components and lead to malfunctions.

• Do not use this product near strong electromagnetic sources, such as a microwave oven. The electromagnetic interference may cause this product to malfunction.

• Do not insert objects other than compatible memory cards into the memory card slots of this product. The metal contacts inside the slots can be damaged by foreign objects.

• Do not use an unknown power adapter other than the one supplied. Connecting this product to an unknown power adapter is very dangerous and may lead to ﬁ re or explosion.

SAFETY INFORMATION

Page 4

Power Adapter

User Manual

PACKAGE CONTENT

Scanner

Calibration Paper

Cleaning Stick

Photo Protective Sleeve

Thank you

Quick Guide

for purchasing this GiiNii NuLife 2.4-inch LCD “Full Size” Photo Scanner. With this new standalone scan-and-view technology, scanning is easy! There is no software installation or PC needed. You can preview the scanned images instantaneously on the

2.4” display screen, and store them directly into a MMC or SD memory

card.

Cleaning Paper

mini USB Cable

It makes your scanning experience easier and enjoyable. You can also transfer the scanned images to your PC via mini USB port. Please follow the following instructions, on page 13, for more details.

LൂՅӑڇ!2!86ጕа΢!

82-329-00071

ፎ٩ྣჴނຊϪ!

CALIBRATIONPAPER,A620

82-329-00071

ᢣүഡማા-U)!ࠔ࡙;1/31/4nn!ሯёתVWᏘ*

Калибровочная карта

Вставьте данную карту в сканер БЕЛОЙ стороной вниз.

Inserte esta tarjeta en el escáner con la cara BLANCA hacia abajo.

Cartão de calibragem

Insert this card with the WHITE side down to the scanner.

ᇚℸⱑ㡆䴶ᳱϟᦦܹᠿᦣҾ

ᇛℸⱑ㡆䴶ᳱϟᦦܹᥗᦣ఼

ࠞ࡯࠼ߩⵣ㕙(ぎⱑ䴶)ࠍߦะߌߡޔᧄ૕ߩᝌ౉ญ ߦ᳓ᐔߦ౉ࠇߊߛߐ޿ޕ

Inisira este cartão com o lado BRANCO voltado para baixo.

Insérez cette carte dans le scanner en orientant la face BLANCHE vers le bas.

Schieben Sie diese Karte mit der WEISSEN Seite nach unten in den Scanner

ﺓﺮﻳﺎﻌﻤﻟﺍﺔﻗﺎﻄﺑ

섥ꩾꐩ넩껹ꅍꌱ뽚뼍陁뼍꾡넩렩麑ꌱ걙롅骽꾅 高냱겢겑꿙

ﺎﻄﺒﻟﺍﻩﺬﻩ ﻞﺧﺩﺃﻣﺘﺠﻬًﺎ ﺾﻴﺑﻷﺍﺐﻧﺎﺠﻟﺍﻥﻮﻜﻳ ﺚﻴﺤﺑﺔﻗ

ﻞﻔﺳﻷﺔﻴﺋﻮﻀﻟﺍﺔﺤﺳﺎﻤﻟﺍﻩﺎﺠﺗ.

алибровочная карт

ставьте данную карту в сканер БЕЛОЙ стороной вниз.

Inserte esta tarjeta en el escáner con la cara BLANC

eAhacia abajo. A

artão de ca

lib

ragem

Insert this card with the WHITE side do

wn to

the scanner.

ᇚ

ℸⱑ㡆䴶ᳱϟᦦܹᠿᦣ

ᇛ

ℸⱑ㡆䴶ᳱϟᦦܹᥗᦣ఼

ࠞ࡯࠼ߩ

ⵣ㕙

(

ぎ

ⱑ䴶

)

ࠍߦะߌߡޔᧄ૕ߩᝌ౉

ญ

ߦ᳓ᐔߦ౉ࠇߊߛߐ޿

Inisi

ra este cartão com o lado

BRANCO

voltado para baixo

nsérez cette carte dans le scanner en orientant la face BLANC

vers le bas.

ﺓﺮﻳﺎﻌﻤﻟﺍﺔﻗﺎﻄ

ﺑ

섥ꩾꐩ넩껹ꅍꌱ뽚뼍陁뼍꾡넩렩麑ꌱ걙롅骽꾅

高냱겢겑꿙

ﺎﻄﺒﻟﺍﻩﻞﺧﺩﺠﻬ

ﺠﺠ

ﺾ

ﻴ ﺑﻷﻴﻴ

ﺐﻧﺎﺠﻟﺍ

ﻥﻮﻜﻳ

ﺚﻴﺤ

ﺑ

ﻔﺳ

ﺔﻴﺋﻮﻀﻟﺍﻩﺎﺠ

ﺗ

Page 5

SCANNER PARTS

Top View

Rear View

1312

5 7

2 3

Names

Descriptions

1 Paper guide • Used to guide the material to be scanned to

improve alignment.

2 Feeding slot

• Feeds the paper or photo for scanning.

3 2.4” LCD screen

• Views the scanned images.

Power(

)/Menu

• Press to turn the power to on or off.

• Long

press for 3~5 seconds to turn off the scanner.

• Press to display the setting menu.

OK(

)

• Press to make or conﬁ rm selections in the menus.

Down(

)

• Moves down to select the option below.

•

Moves down in the thumbnail mode.

Right(

)

• Moves right to select the option.

•

Moves to the next scanned image.

Zoom( )

• Zoom the scanned image.

Left(

)

• Moves left to select the option .

• Moves to the previous scanned image.

Up( )

• Moves up to select the option above.

•

Moves up in the thumbnail mode.

Scan(

SCAN

)

• Press to enter the Scan mode.

12 Mini USB port

• Connects to PC to transfer ﬁ les.

13 SD/MMC • Accepts these memory cards: SD/SDHC/MMC.

14 DC-IN 5V jack

• Connects to the supplied AC power adapter.

Page 6

PRODUCT SETUP

2. Press Power (

) button to bring up the USB Mode menu.

Please insert a SD/MMC card!

USB Mode

Mass Storage

USB Power

3. Press UP

( )

/DOWN

( )

button to select USB Power, then press

(

)

button.

Connecting to Power

Using AC adapter

Connect one end to the scanner’s DC IN jack, and the other to wall socket.

Using mini USB cable as a power source

1. Connect the mini USB connector to the scanner, and the other 2

regular USB connectors to laptop or PC.

To DC IN 5V

To wall socket

mini USB cable (supplied)

Laptop

Page 7

Inserting a SD/MMC Card

Insert your SD or MMC card into the card slot with the gold contacts facing up.

Rear View

Turning on the Scanner

Press Power (

) button to turn on the scanner.

Page 8

SCAN AND PLAYBACK

Scanner Setting

1. Press MENU(

) button to enter the

scanner setting menu.

2. Press LEFT

( )

/RIGHT

( )

button to

select Scan ( ) or Setup ( ) .

3. Press UP

( )

/DOWN

( )

button to

select an option from the submenus.

Note: Press MENU(

) button

repeatedly to go to the upper level, or exit the Scan menu.

Menus Sub-menus Descriptions

Scan( )

Color Mode(

)

Selects a scan mode: Gray(

), Color( ).

Color Optimum(

)

This function provides a color optimization mechanism which will achieve the best color match possible based on the actual color content of the image. Note 1: Scanning will take longer

than normal with this setting. Please be patient and wait until the process is ﬁ nished.

Note 2: This setting is set to its

default of “OFF” after the scanner is restarted.

Setup(

)

Language( )

English, German, French, Italian, Spanish, Dutch, Portuguese, Polish.

Format( ) Deletes all the data stored in the

SD/MMC card.

Calibration(

)

Select “OK” to calibrate the scanner. Note: Refer to page 14 for detailed

procedures.

Factory Default(

)

Restores the scanner settings to the default settings.

Page 9

It is recommended to use the supplied photo protective sleeve for photo scanning. Please place the photo inside the protective sleeve. Make sure the sealed end goes ﬁ rst into the feed slot for scanning.

Note: Do not use the sleeve for laminated photos.

Scanning Images

Note: “Please insert a SD/MMC card”. A reminder message will

appear if you did not insert a SD or MMC card to the scanner.

1. Insert the photo, or document facing DOWN into the feed slot, adjust

the paper guide against the edges of the photo if necessary.

Note: To avoid the paper jams, align the photo, or document against

the right side of the feed slot if it is smaller than A4 size.

Using the Photo Protective Sleeve

Paper guide

Photo facing down

Page 10

Note 3: When scanning images with a dark

background , the scanner may not be able to detect the images, or may crop the images in an undesirable way.

Memory Full

3. The scanned image will appear on the screen and saved onto the

inserted memory card.

Note 2: When the memory card is full,

a “Memory Full” warning will appear.

Note 1: By default the folder \DCIM\100NVtim will be created in the

inserted memory card. All scanned images will be saved in the 100NVTIM folder. When the counter reaches 9999 it will be automatically generated another new folder in a sequential order.

Note: The scanner will enter the playback mode after scans, or press

(

)

button.

1. Press LEFT

( )

/RIGHT

( )

button to browse forward or backward the

scanned images at a full screen.

2. Press OK

(

)

button to enter the thumbnail mode from the browse mode. All scanned images stored in the SD/MMC card will be displayed in the thumbnail mode.

Playing back the Scanned Images

1/15

2. Press Scan (

SCAN

) button, the photo or document will be rolled through

and scanned.

Note: Wait until scanning is complete.

Illustration: Note 2

Page 11

3. Press LEFT

( )

/RIGHT

( )

button repeatedly to move to the previous

or the next page.

4. Press UP

( )

/DOWN

( )

/LEFT

( )

/RIGHT

( )

button to select an

image, and then press OK

(

)

button to view the image in full

screen.

1. Press ZOOM( ) button to zoom in an image. Each time of the button is pressed, the image will be enlarged in the sequence of x2, x3, x4, and x5.

2. Press UP

( )

/DOWN

( )

/LEFT

( )

/RIGHT

( )

button to move the

pointer to view the zoom-in image at the pointed area.

Note: This function only works in the Zoom-in view.

Zoom

Page 12

Playback Setting

Menus Sub-menus Descriptions

Playback( )

Delete(

)

Delete the scanned image(s): One(

), All( ).

Rotate(

)

Rotate the scanned image(s): Normal ( ), 90 degree( ), 180

degree ( ), or 270 degree ( ). Note: The orientation of the

scanned images remain unchanged when transferring images to PC, although they have been rotated with this setting.

Setup(

)

Language(

)

English, German, French, Italian, Spanish, Dutch, Portuguese, Polish.

Format( )

Deletes all the data stored in the SD/MMC card.

Calibration(

)

Select “OK” to calibrate the scanner. Note: Refer to page 14 for detailed

procedures.

Factory Default (

)

Restores the playback settings to the default settings.

1. Press MENU(

) button to enter the

playback setting menu.

2. Press LEFT

( )

/RIGHT

( )

button to

select Playback (

) or Setup ( ) .

3. Press UP

( )

/DOWN

( )

button to

select an option from the submenus.

Note: Press MENU(

) button repeatedly to go to the upper level, or exit the Playback menu.

Delete

Rotate

Page 13

TRANSFERRING THE SCANNED IMAGES TO PC

ATTENTION: To get proper connection with your PC and the unit,

please turn the power off before making the connection.

3. P

ress UP

( )

/DOWN

( )

button to select Mass Storage, then press

(

)

button.

4. Once the connection is established, a “Removable Disk” window will appear on the PC.

5. Enter the Removable Disk in the PC and use the drag and drop method to copy ﬁ les between the Scanner and the PC.

Note: The Removable Disk on the PC shows the ﬁ les stored in the

SD/MMC card which is connected to the scanner.

Disconnecting the Scanner from PC

1. Double click the Safely Remove Hardware icon on the task bar in Windows.

2. Select the USB Mass Storage Device, then click OK to disconnect the scanner from the PC.

Note: Remove the mini USB cable from the scanner when you have

ﬁ nished ﬁ le transfers.

2. Press Power (

) button to bring up the USB Mode menu.

USB Mode

USB Power

Mass Storage

Master connector

mini USB Cable (supplied)

1. Connect the mini USB connector to the scanner, and the master connector to PC.

Page 14

• To get high image quality and good recognition results, please perform step 1, 2, 3 in that order prior to use if necessary.

• Make sure the cleaning and calibration paper, and cleaning stick are clean without any dust before use.

• Do not use any solvent to clean the sensor.

1. Put your thumbs in the feed slot and pull the feed slot cover upwards to remove it from the scanner.

2. Insert the thin end of the cleaning stick into the slot of the scanner at the rear side. Move the stick from one side to the other slightly a few times, then remove it.

Rear side

Cleanning stick

Step 2: Using the cleaning stick

Insert the supplied cleaning paper into the feed slot of the scanner, then press SCAN

(

SCAN

)

button to rolled through and scanned.

Step 1: Using the cleaning paper

Note: Do not insert the cleaning stick into the feed slot at the front side

of the scanner as this may damage the internal component.

Front side

Cleaning paper

CLEANING AND CALIBRATING THE SCANNER

Page 15

Step 3: Using the calibration paper

1. Insert the calibration paper with the white side DOWN into the feed slot.

2. Press MENU

(

)

button to bring up the System Menu.

4. Select OK

(

)

to begin the calibration process.

Note: The process will take few minutes to ﬁ nish, and then shut down

automatically. Please turn the power back on again.

3. Align the feed slot cover. Assembly the edge’s two latching tabs with the mounting holes on the scanner. Push the cover back in until it clicks in place.

3. Press LEFT

( )

/RIGHT

( )

button to select Setup ( ) button then

press

( )

/DOWN

( )

button to select “Calibration”.

Page 16

SPECIFICATION

Scan Sensor Linear Color CIS Display 2.4” Color TFT LCD (480 x 234 pixels) Scan Size

Minimum: 38.1mm x 50.8mm (1.5” x 2”) Maximum: 216mm x 356mm (8.5” x 11”)

Scan Speed(A4 size) 10 sec at gray 300dpi

15 sec at color 300dpi

Supported OS for Mass

storage

Windows XP / Vista / 7

Mac OS X (10.4 / 10.5 / 10.6) Memory Card Slot MMC / SD (SDHC) I/O DC-in (5V, 2A) / USB mini-B USB port mass storage / power supply File Format JPEG OSD language English, German, French, Italian, Spanish,

Dutch, Portuguese, Polish. Buttons Power/Menu, Scan, Zoom, OK, Up, Down,

Left, Right Dimensions 300 x 86 x 56.2 mm (11.8” x 3.4” x 2.2”) Weight 520g (1.1lbs)

• Check to make sure the mini USB cable is ﬁ rmly plugged into the scanner.

• Please clean and calibrate the scanner if the scan result is poor quality.

• Make sure the paper/photo is gripped and slightly pulled into the feed slot prior to scanning.

HELPFUL HINTS

This symbol on the product or in the instructions means that your electrical

and electronic equipment should be disposed at the end of its life separately

from your household waste. There are separate collection systems for

recycling in the EU. For more information, please contact the local authority or

your retailer where you purchased the product.

Page 17

WARRANTY COVERAGE:

This warranty obligation is limited to the terms set forth below.

WHO IS COVERED: This product is warranted to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (

“

Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof.

WHAT IS COVERED:

This warranty covers new products if a defect in material or workmanship occurs and a valid claim is received within the Warranty Period. At its option, the company will either (1) repair the product at no charge, using new or refurbished replacement parts, or (2) exchange the product with a product that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or most comparable to the original product in current inventory, or (3) refund the original purchase price of the product. The Company warrants replacement products or parts provided under this warranty against defects in materials and workmanship from the date of the replacement or repair for the remaining portion of the original product’s warranty. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes the company’s property. When a refund is given, your product becomes the company’s property.

Replacement product can only be sent if all warranty requirements are met. Failure to follow all requirements can result in delay.

WHAT IS NOT COVERED – EXCLUSIONS AND LIMITATIONS:

This Limited Warranty applies only to the new products that can be identified by the trademark, trade name, or logo affixed to it. This Limited Warranty does not apply to any non-GiiNii hardware product

GiiNii 90 DAY LIMITED WARRANTY

Page 18

or any software, even if packaged or sold with the product. NonGiiNii hardware manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product. The Company is not liable for any damage to or loss of any programs, data, or other information stored on any media contained within the product, or any non-GiiNii product or part not covered by this warranty. Recovery or reinstallation of programs, data or other information is not covered under this Limited Warranty. This warranty does not apply (a) to damage caused by accident, abuse, misuse, neglect, misapplication, or non-GiiNii product, (b) to damage caused by service performed by anyone other than an Authorized Service Location, (c) to a product or a part that has been modified without written permission, or (d) if any serial number has been removed or defaced, or (e) to a product, accessories or consumables sold “AS IS” without warranty of any kind by including refurbished GiiNii products sold “As IS” by some retailers.

THIS LIMITED WARRANTY DOES NOT COVER:

• Shipping charges to return defective product.

• Labor charges for installation or setup of the product, adjustment of

customer controls on the product, and installation or repair of any part outside of the product.

• Product repair and/or part replacement because of improper

installation or maintenance, connections to improper voltage supply, power line surge, lighting damage, retained images or screen markings resulting from viewing ﬁ xed stationary content for extended periods, product cosmetic appearance items due to normal wear and tear, unauthorized repair or other cause not within the control of the company.

• Damage or claims for products not being available for use, or for

lost data or lost software.

• Damage from mishandled shipments or transit accidents when

returning product.

• A product that requires modification or adaptation to enable it to

operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modiﬁ cations.

Page 19

• A product used for commercial or institutional purposes (including

but not limited to rental purposes).

• Product lost in shipment and no signature veriﬁ cation receipt can be

provided.

• Failure to operate per Owner’s Manual.

TO OBTAIN ASSISTANCE

Send an email to customerservice@giinii.com. For technical support call toll free: 1-866-909-3550

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER. GiiNii SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.

Some states do not allow the exclusions or limitations of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

This warranty gives you speciﬁ c legal rights. You may have other rights which may vary from state/province to state/province.

Page 20

GiiNii International Product Registration

P.O. Box 1689

Pleasanton, CA 94566

82-329-00110