Congratulations on your purchase of the GIGABYTE Notebook.
1
2
3
This manual will help you to get started with setting up your notebook. The nal product
conguration depends on the model at the point of your purchase. GIGABYTE reserves
the right to amend without prior notice. For more detailed information, please visit our
website at www.gigabyte.com
Using GIGABYTE Notebook for the First Time
1 Connect the power cord to the AC adapter.
2 Connect the AC adapter to the DC-in jack on the left side of the notebook.
3 Connect the power cord to the power outlet.
1
English
Switching on the Power
After you turn on the X11 for the very first time, do not turn it off until the
operating system has been configured. Please note that the volume for the
audio will not function until Windows® Setup has completed.
Booting Up the X11 for the First Time
Depending on your conguration, the Microsoft® Windows® Boot Screen will be
the rst screen that you will see as the notebook starts up. Follow the on-screen
prompts and instructions and enter your personal information to complete the
setup of the Windows® Operating System.
2
Your GIGABYTE Notebook Tour
Top View
English
Left View
1
2
3
4
1 Webcam Indicator
2 Microphone
3 Webcam
4 Light Sensor
5
5
6
7
Power Key
6 Speakers
7
TouchPad
1 2 3
Right View
1 2 3
1 DC-in Jack
2 USB 3.0
3 Mini Display
1 Micro SD Slot
2 Combo Audio Jack
3 USB 2.0
Hotkeys
The computer employs hotkeys or key combinations to access most of the
computer’s controls like screen brightness and volume output. To activate
hotkeys, press and hold the <Fn> key before pressing the other key in the
hotkey combination
Hotkey Function Description
Fn+F1 Brightness Up Increases the screen brightness.
Fn+F2 Brightness Down Decreases the screen brightness.
Switches display output between the
Fn+F3 Display Toggle
Fn+F4 Touchpad On/Off Turns the internal touchpad on and off.
Fn+F5 Light Sensor On/Off Turn light Sensor on and off.
Fn+F6 Sleep Puts the computer in Sleep Mode.
Fn+F7 Volume Down Decreases the sound volume.
Fn+F8 Volume Up Increases the sound volume.
Fn+F9 Mute On/Off Turns the speaker on and off.
display screen, external monitor
(if connected) and both.
3
English
Fn+Tab WLAN/BT Toggle
Enables/disables the Wireless LAN /
Bluetooth function.
GIGABYTE Software Application
GIGABYTE Smart Recovery
●
● If the machine you purchase already has operating system built-in, you
can restore the system back to factory default by using GIGABYTE Smart
Recovery. Please be noted that the GIGABYTE Smart Recovery interface,
icons, utilities and software versions may vary based on the purchased
models. Please operate GIGABYTE Smart Recovery according to the
default built-in version.
● Please be noted that personal data will be lost after recovery, do remember
to backup any data before operating this function.
4
English
Appendix
■
Warranty & Service:
Warranty and service and related information please refer to the warranty card
or GIGABYTE service website as the below link:
http://www.gigabyte.com/support-downloads/technical-support.aspx
■
FAQ :
FAQ (Frequent Asked Questions) please refer to the below link:
http://www.gigabyte.com/support-downloads/faq.aspx
Loading...