Gigabyte Q2440 User Manual

Congratulations on the Purchase of Your GIGABYTE Notebook Q2440

This Manual will help you to get started with setting up your notebook.For more detailed information, please visit our website at www.gigabyte.com.All specifications are subject to the manufacturer's configuration at the time of shipping and may change without prior notice, written or otherwise.

1 Using GIGABYTE Notebook for the First Time

1 2

A

B

To install the battery please follow these steps:

1Slide the battery into the slot until both latches (Shown as A & B ) “click” into place.You may hear a “clicking” sound, once the battery is secure.

2Slide latch A to the right to lock the battery in place.

2

1

3

1Connect the power cord to the AC adapter.

2Connect the AC adapter to the DC-in jack on the right side of the notebook.

3Connect the power cord to the power outlet.

1 English

2 English

Switching on the Power

After you turn on the Q2440 for the very first time, do not turn it off until the operating system has been configured. Please note that the volume for the audio will not function until Windows® Setup has completed.

Booting Up the Q2440 for the First Time

Depending on your configuration, the Microsoft® Windows® Boot Screen will be the first screen that you will see as the notebook starts up. Follow the on-screen prompts and instructions and enter your personal information to complete the setup of the Windows® Operating System.