Gigabyte GV-NX68G256D-B, GV-NX68G256DB-ED User Manual

VGA Card

GV-NX68G256D-B

Dec. 1, 2005

VGA Card

GV-NX68G256D-B

Dec. 1, 2005

GV-NX68G256D-B

GeForce™ 6800 GS Graphics Accelerator

User's Manual

Rev. 101 12MD-NX68G2B-101R

* The WEEE marking on the product indicates this product must not be disposed of with user's other household waste

and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!!

* The WEEE marking applies only in European Union's member states.

any form without the expressed, written permission of GBT.

Trademarks

Third-party brands and names are the property of their respective owners.

Notice

Please do not remove any labels on VGA card, this may void the warranty of this VGA card.

Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.

The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make

a commitment to update the information contained herein.

Table of Contents

English

1. Introduction ......................................................................................... 3

2. Hardware Installation ........................................................................... 4

3. Software Installation ............................................................................ 9

4. Troubleshooting Tips ........................................................................29

1.1. Features ..................................................................................................... 3

1.2. Minimum system requirement ....................................................................... 3

2.1. Board Layout .............................................................................................. 4

2.2. Hardware Installation ................................................................................... 6

3.1. Windows® XP Driver and Utilities Installation ................................................. 9

3.1.1. Operating System Requirement ................................................................................... 9

3.1.2. DirectX installation ........................................................................................................ 10

3.1.3. Driver installation .......................................................................................................... 12

3.1.4. Utilities on driver CD .................................................................................................... 14

3.1.5. Taskbar icon................................................................................................................. 16

3.1.6. Display Properties pages ............................................................................................ 19

3.1.7. nView Properties pages .............................................................................................. 23

3.2. Windows® 2000 Driver Installation ............................................................. 28

5. Appendix .......................................................................................... 30

5.1. How to Reflash the BIOS ........................................................................... 30

5.1.1. Reflash BIOS in MS-DOS mode ................................................................................. 30

5.1.2. Reflash BIOS in Windows mode ................................................................................ 30

5.2. Resolutions and Color Depth Table (In Windows® XP) ............................... 31

GV-NX68G256D-B Graphics Accelerator - 2 -

1. Introduction

1.1. Features

• Powered by NVIDIA® GeForce™ 6800 GS Graphics Processing Unit (GPU)

• Supports the newest PCI Express x 16

• Integrated with 256MB GDDR3 memory

• Supports DirectX 9.0c

• Supports NVIDIA® SLI

• Supports AV / S-Video and HDTV output

• Supports DVI-I / D-Sub connector

(Scalable Link Interface) technology

1.2. Minimum system requirement

• IBM® or 100% PC compatible with Pentium® III 650MHz or AMD Athlon 650MHz

class processor or higher

• One PCI Express x 16 slot

• Operating Systems Windows® 2000 / Windows® XP

• 64MB system memory

• 50MB of available disk space for full installation

• CD-ROM or DVD-ROM drive

• Minimum power supply 350W

(note)

English

(Note) SLI technology requires a PCI Express motherboard with two x16 physical connectors.

Graphics cards working in an SLI configuration must be of the same model and from the same

vendor. To support SLI technology via the PCI Express bus, the GV-NX68G256D-B requires

driver version 81.85 or later.

Introduction- 3 -

2.1. Board Layout

English

VGA Monitor Connector

2. Hardware Installation

TV-out

(15-pin)

DVI-I Connector

YHDTV

Analog Monitor

Pb/AV Output

S-Video Output

VGA Output

DVI Output

NTSC / PAL TV

Projector

Analog LCD Monitor

Digital LCD Monitor

GV-NX68G256D-B Graphics Accelerator - 4 -

DVI-I to D-Sub

Adapter

TV-out

VGA Monitor

Connector

(15-pin)

DVI-I Connector

Expansion cards contain very delicate Integrated Circuit (IC) chips. To

protect them against damage from static electricity, you should follow

some precautions whenever you work on your computer.

1. Turn off your computer and unplug power supply.

2. Use a grounded wrist strap before handling computer components. If you do not

have one, touch both of your hands to a safely grounded object or to a metal object,

such as the power supply case.

3. Place components on a grounded antistatic pad or on the bag that came with the

components whenever the components are separated from the system.

The card contains sensitive electric components, which can be easily damaged by

static electricity, so the card should be left in its original packing until it is installed.

Unpacking and installation should be done on a grounded anti-static mat. The operator

should be wearing an anti-static wristband, grounded at the same point as the anti-

static mat.

Inspect the card carton for obvious damage. Shipping and handling may cause damage

to your card. Be sure there are no shipping and handling damages on the card before

proceeding.

DO NOT APPLY POWER TO YOUR SYSTEM IF IT HAS BEEN DAMAGED ON

THE CARD.

In order to ensure your graphics card working correctly, please use official

Gigabyte BIOS only. Use none official Gigabyte BIOS might cause problem

on the graphics card.

English

Hardware Installation- 5 -

2.2. Hardware Installation

Now that you have prepared your computer, you are ready to install your graphics accelerator

English

card.

To remove the existing graphics card:

1. Power off the computer and monitor, then

2. Remove the computer cover. If necessary,

disconnect the display cable from the back

of your computer.

consult your computer's manual for help in

removing the cover.

3. Remove any existing graphics card from

your computer.

Or, if your computer has any on-board

graphics capability, you may need to disable

it on the motherboard. For more information,

see your computer documentation.

GV-NX68G256D-B Graphics Accelerator - 6 -

To install your new graphics card:

1. Locate the PCI Express x 16 slot. If

necessary, remove the metal cover from this

slot; then align your graphics card with the

PCI Express x 16 slot, and press it in firmly

until the card is fully seated.

2. Replace the screw to fasten the card in place,

and replace the computer cover.

After installation, please connect the power cable to your graphics card, or the system will not boot.

English

3. Plug the display cable into your card; then

turn on the computer and monitor. If your

graphics card came with a DVI-I connector,

you can connect a flat panel display to the

appropriate connector, as shown below...

To TV or VCR

To VGA Monitor To Flat Panel Display

You are now ready to proceed with the installation of the graphics card driver. Please refer

to next chapter for detailed instructions.

Hardware Installation- 7 -

+ 21 hidden pages