GIGABYTE GV-NX66T256DE Owner's Manual

VGA Card
GV-NX66T256DE
Sep. 6, 2005
VGA Card
GV-NX66T256DE
Sep. 6, 2005
GV-NX66T256DE
GeForce™ 6600 GT Graphics Accelerator
User's Manual
Rev. 101
12MD-X66T2DE-101R
Copyright
© 2005 GIGABYTE TECHNOLOGY CO., LTD
any form without the expressed, written permission of GBT.
Trademarks
Third-party brands and names are the property of their respective owners.
Notice
Please do not remove any labels on VGA card, this may void the warranty of this VGA card.
Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.
The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make
a commitment to update the information contained herein.
Table of Contents
English
1. Introduction ......................................................................................... 3
2. Hardware Installation ........................................................................... 4
3. Software Installation ............................................................................ 9
4. Troubleshooting Tips ........................................................................28
1.1. Features ..................................................................................................... 3
1.2. Minimum system requirement ....................................................................... 3
2.1. Board Layout .............................................................................................. 4
2.2. Hardware installation ................................................................................... 6
3.1. Windows® XP driver and utilities installation .................................................. 9
3.1.1. Operating system requirement ..................................................................................... 9
3.1.2. DirectX installation .......................................................................................................... 9
3.1.3. Driver installation ...........................................................................................................11
3.1.4. Utilities on driver CD .................................................................................................... 13
3.1.5. Taskbar icon................................................................................................................. 15
3.1.6. Display properties pages ............................................................................................. 18
3.1.7. nView properties pages ............................................................................................... 22
3.2. Windows® 2000 driver installation .............................................................. 27
5. Appendix .......................................................................................... 29
5.1. How to Reflash the BIOS ........................................................................... 29
5.1.1. Reflash BIOS in MS-DOS mode ................................................................................. 29
5.1.2. Reflash BIOS in Windows mode ................................................................................ 29
5.2. Resolutions and Color Depth Table (In Windows® XP) ............................... 30
GV-NX66T256DE Graphics Accelerator - 2 -
1. Introduction
1.1. Features
Powered by NVIDIA® GeForce™ 6600 GT Graphics Processing Unit (GPU)
Supports the newest PCI Express x 16
Integrated with 256MB DDRII memory
Supports DirectX 9.0c
Supports NVIDIA® SLI
Supports AV / S-Video and HDTV output
Provides D-Sub and DVI-I connectors
TM
(Scalable Link Interface) technology
1.2. Minimum system requirement
IBM® or 100% PC compatible with Pentium® III 650MHz or AMD Athlon 650MHz
class processor or higher
One PCI Express x 16 slot
Operating Systems Windows® 2000 / Windows® XP
64MB system memory
50MB of available disk space for full installation
CD-ROM or DVD-ROM drive
note
English
(Note) SLI technology requires a PCI Express motherboard with two x16 physical connectors.
Graphics cards working in an SLI configuration must be with the same model name
(i.e. GV-NX66T256DE) and from the same vendor (i.e. GIGABYTE TECHNOLOGY).
Introduction- 3 -
2.1. Board Layout
English
2. Hardware Installation
TV-out
DVI-I Connector
VGA Monitor
Connector
(15-pin)
DVI Output
Digital LCD Monitor
Pr
HDTV
Pb/AV Output
Y
NTSC / PAL TV
Projector
Analog LCD Monitor
OR
Analog LCD Monitor
S-Video Output
VGA Output
VGA Output
Analog Monitor
GV-NX66T256DE Graphics Accelerator - 4 -
DVI-I to D-Sub Adapter
TV-Out
DVI-I Connector
VGA Monitor
Connector
(15-pin)
Expansion cards contain very delicate Integrated Circuit (IC) chips. To
protect them against damage from static electricity, you should follow
some precautions whenever you work on your computer.
1. Turn off your computer and unplug power supply.
2. Use a grounded wrist strap before handling computer components. If you do not
have one, touch both of your hands to a safely grounded object or to a metal object,
such as the power supply case.
3. Place components on a grounded antistatic pad or on the bag that came with the
components whenever the components are separated from the system.
The card contains sensitive electric components, which can be easily damaged by
static electricity, so the card should be left in its original packing until it is installed.
Unpacking and installation should be done on a grounded anti-static mat. The operator
should be wearing an anti-static wristband, grounded at the same point as the anti-
static mat.
Inspect the card carton for obvious damage. Shipping and handling may cause damage
to your card. Be sure there are no shipping and handling damages on the card before
proceeding.
DO NOT APPLY POWER TO YOUR SYSTEM IF IT HAS BEEN DAMAGED ON
THE CARD.
In order to ensure your graphics card working correctly, please use official
Gigabyte BIOS only. Use none official Gigabyte BIOS might cause problem
on the graphics card.
English
Hardware Installation- 5 -
2.2. Hardware installation
Installing Your graphics card.
English
Now that you have prepared your computer, you are ready to install your graphics
accelerator card.
To remove the existing graphics card:
1. Power off the computer and monitor, then
2. Remove the computer cover. If necessary,
3. Remove any existing graphics card from
disconnect the display cable from the back
of your computer.
consult your computer's manual for help
in removing the cover.
your computer.
Or, if your computer has any on-board
graphics capability, you may need to
disable it on the motherboard. For more
information, please see you computer
documentation.
To install your new graphics card:
1. Locate the PCI Express x 16 slot. If
necessary, remove the metal cover from this
slot; then align your graphics card with the
PCI Express x 16 slot, and press it in firmly
until the card is fully seated.
GV-NX66T256DE Graphics Accelerator - 6 -
Warning! When installing the graphics card, do not push down the heat pipe. This may displace the heat pipe and cause bad contact between the GPU and thermal pad as well as affect the heat dissipation. To avoid system instability, do not touch the graphics card when it is runnnig .
2. Replace the screw to fasten the card in place,
and replace the computer cover.
3. Plug the display cable into your card; then
turn on the computer and monitor. If your
graphics card came with a DVI-I connector,
you can connect a flat panel display to the
appropriate connector, as shown below...
English
To TV or VCR
To VGA Monitor
To Flat Panel Display
You are now ready to proceed with the installation of the graphics card driver. Please refer to next chapter for detailed instructions.
Hardware Installation- 7 -
How to enable NVIDIA® SLI
After installing two SLI-ready graphics cards of the same model on an SLI motherboard
(Figure 1), users can enable SLI mode simply through the graphics card driver (For the
English
GV-NX66T256DE, driver version must be at least 77.72)
Step 1: After installing the graphics card driver, right-click on Desktop and select Properties.
When Display Properties dialog box appears, select the Settings tab. In Settings, click
the Advanced button.
Step 2: Click the GeForce 6600 tab when advanced properties dialog box appears. Select
SLI multi-GPU from the side menu and select the Enable SLI multi-GPU check box
(Figure 2) and click Apply.
TM
(Scalable Link Interface) technology:
(Note)
.
Figure 1
Figure 2
Step 3: Restart your system when prompted.
(Note): Only Windows XP operating system supports SLI mode. Please do not enable SLI
multi-GPU in Windows 2000.
GV-NX66T256DE Graphics Accelerator - 8 -
3. Software Installation
In this manual, we assume that your CD-ROM Drive letter to be Drive D:
The installation of Windows® 2000 / Windows® XP drivers is very simple. When you insert the
driver CD into your CD-ROM drive, you can see the AUTORUN window (if it does not show
up, run "D:\setup.exe"). Then you can follow the guides to setup your graphics card driver.
(Please follow the subsection 3.1.3 "Driver installation" to install the driver for your graphics
accelerator.)
3.1. Windows® XP driver and utilities installation
3.1.1. Operating system requirement
When loading the graphics card drivers for the system, please make sure your system
has installed DirectX 9.0c or later version.
If you install the graphics card drivers for the motherboard, which consist of SIS or VIA
chipsets, please install the appropriate driver program for that motherboard. Or please
contact your motherboard nearest dealer for motherboard driver.
3.1.2. DirectX installation
Install Microsoft DirectX to enable 3D hardware acceleration support for Windows® 2000
or Windows® XP to achieve better 3D performance.
English
0 Note: For software MPEG support in Windows® 2000 or Windows® XP, you must install
DirectX first. Users who run Windows XP with Service Pack 2 or above do not need to
install DirectX separately.
Step 1. When autorun window show up, click
the Install DirectX 9 item.
Software Installation- 9 -
Loading...
+ 25 hidden pages