Gigabyte GV-N460OC2-1GI User Manual

GV-N460OC2-1GI GV-N460OC-1GI/ GV-N460OC-768I
NVIDIA® GeForceTM GTX 460 Graphics Accelerator
Rev. 102 12MM-N460-102R
Copyright
© 2010 GIGABYTE TEC HNOLOG Y CO., LTD Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in any form without the expressed, writ ten permi ssion of GBT.
Trademarks
Third-party br ands a nd names are t he proper ties of th eir res pecti ve own ers.
Notice
Please do not remove any label s on t his g raphics c ar d. Doin g so may v oid t he wa rranty of this c ard . Due to rapid change in techn olog y, some of the spe cific ation s might be out of da te be fore publ icat ion of t his thi s manual . The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to upd ate th e info rmatio n co ntained herei n.
Rovi Product Notice:
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only u nless otherwis e authori zed by Rovi Corp oration . Reverse enginee ring or di sas sembly is prohibi ted.
GV-N460OC-1GI/GV-N460OC-768I
July. 02, 2010
July. 02, 2010
VGA Card
GV-N460OC-1GI
GV-N460OC-768I
VGA Card
Oct. 27, 2010
GV-N460OC2-1GI
VGA Card
Oct. 27, 2010
VGA Card
GV-N460OC2-1GI
Table of Contents
1. Introduction ................................................................................................................ 4
1.1. Features .........................................................................................................................4
1.2. Minimum System Requirements ....................................................................................4
2. Hardware Installation.................................................................................................. 5
2.1. Board Layout ................................................................................................................. 5
2.2. Hardware Installation......................................................................................................8
3. Software Installation.................................................................................................. 10
3.1. Driver and Utility Installation......................................................................................... 10
3.1.1. Driver Installation .........................................................................................................10
3.2. Display Properties Pages ........................................................................................ 12
3.3. Accessing NVIDIA Control Panel............................................................................ 13
4. Troubleshooting Tips................................................................................................ 21
5. Appendix ................................................................................................................. 22
5.1. How to Reflash the BIOS in MS-DOS Mode.............................................................. 22
5.2. Resolutions and Color Depth T able (In Windows XP)................................................... 23
5.3. Regulatory Statements ................................................................................................. 25
- 4 -
1. Introduction
1.1. Features
Powered by NVIDIA® GeForceTM GTX 460 Graphics Processing Unit (GPU)
Supports PCI Express 2.0
Integrated with 1GB GDDR5 memory (For GV-N460OC2-1GI / GV-N460OC-1GI only)
Integrated with 768 MB GDDR5 memory(For GV-N460OC-768I only)
Supports DirectX
Supports NVIDIA
Supports 2 Dual-Link DVI-I connectors
Supports 1 mini HDMI connector
Supports HDCP (High-Bandwidth Digital Content Protection) technology
1.2. Minimum System Requirements
Hardware
- 450-watt system power supply specification or above is recommended
- Intel® Pentium® 4 or AMD AthlonTM XP class
- 2GB system memory (4GB recommended)
- Optical drive for software installation (CD-ROM or DVD-ROM drive)
®
11
TM
®
SLI
(Scalable Link Interface) technology
(Note 1)
Operating System
- Windows
- Windows
- Windows
SLI
TM
®
7
®
Vista
®
XP
Configuration
If you are planning on using this graphics card as part of an SLI system, the following are required:
- An SLI certified motherboard with two PCIe x16 slots and correct chipset driver
- Two GV-N460OC2-1GI/GV-N460OC-1GI/GV-N460OC-768I for SLI configuration;
- A power supply with 600-watt or above is recommended
- An SLI bridge connector
(Note 1) SLI technology requires a PCI Express motherboard with two x16 physical connectors.
Graphics cards working in an SLI configuration must be with the same model name (e.g. GV-N460OC2-1GI/GV-N460OC-1GI/GV-N460OC-768I ) and from the same vendor (e.g. GIGABYTE
TECHNOLOGY).
- 5 - Introduction
2. Hardware Installation
2.1. Board Layout
1.GV-N460OC-768I/GV-N460OC-1GI
SLI Connector
Mini HDMI Connector
DVI-I Connector 1
DVI-I Connector 2
Power Connectors
mini HDMI to HDMI adapter(optional)
HDMI TV
Digital LCD Monitor
Digital LCD Monitor
DVI Output
DVI Output
Mini HDMI Connector
DVI-I Connector 1
DVI-I Connector 2
- 6 -GV-N400 Series Graphics Accelerator
2.GV-N460OC2-1GI
Mini HDMI Connector
DVI-I Connector 1
DVI-I Connector 2
Power Connectors
SLI Connector
mini HDMI to HDMI adapter(optional)
HDMI TV
Digital LCD Monitor
Digital LCD Monitor
DVI Output
DVI Output
Mini HDMI Connector
DVI-I Connector 1
DVI-I Connector 2
- 7 - Hardware Installation
The GV-N460OC2-1GI/GV-N460OC-1GI/GV-N460OC-768I graphics card is a performance optimized high-end card. Power is taken from the PCI Express host bus as well as the external power connectors.
NVIDIA power
Connect power from the system power supply to the GeForce card(s).Use the connection method for your particular graphics card.
GV-N460OC2-1GI/GV-N460OC-1GI/GV-N460OC-768I:Connect two 6-pin PCI Express auxil iary power connectors coming from the computer power supply to the connectors on the top edge of the GeForce GTX 460 graphics card.
- 8 -GV-N400 Series Graphics Accelerator
Expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer.
1. Turn off your computer and unplug power supply.
2. Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case.
3. Place components on a grounded antistatic pad or on the bag that came with the components whenever the components are separated from the system.
The card contains sensitive electric components, which can be easily damaged by static electricity, so the card should be left in its original packing until it is installed. Unpacking and installation should be done on a grounded anti-static mat. The operator should be wearing an anti-static wristband, grounded at the same point as the anti-static mat. Inspect the card carton for obvious damage. Shipping and handling may cause damage to your card. Be sure there are no shipping and handling damages on the card before proceeding.
DO NOT APPLY POWER TO YOUR SYSTEM IF THE GRAPHICS CARD IS DAMAGED.
In order to ensure that your graphics card can work correctly, please use official GIGABYTE BIOS only. Using non-official GIGABYTE BIOS might
cause problem(s) on the graphics card.
- 9 - Hardware Installation
2.2. Hardware Installation
Now that you have prepared your computer, you are ready to install your graphics card. Step 1.
Locate the PCI Express x16 slot. If necessary, remove the metal cover from this slot; then align your graphics card with the PCI Express x16 slot, and press it in firmly until the card is fully seated.
Make sure that the gold edge connector of the graphics card is securely inserted.
Step 2. Replace the screw to fasten the card in place, and replace the computer cover.
Step 3. This graphics card provides two DVI-I digital connectors and one mini HDMI connector. You can connect a monitor that sup­ports DVI-I function. To connect a HDMI monitor,you need a cable or adapter to connect from the mini-HDMI connector to a HDMI monitor.
Connect a flat panel
T o HDMI Monitor
T o Flat Panel Display
Connect a HDMI monitor
- 10 -GV-N400 Series Graphics Accelerator
How NVIDIA® SLITM (Scalable Link Interface) technology works:
In an SLI configuration, two SLI-ready graphics cards of the same model and the same manufacturers are connected together via SLI bridge connector in a system that provides two x16 PCI Express slots to scale graphics performance. The picture below shows that two graphics cards are linked in parallel in an SLI configuration.
SLI Configuration:
SLI bridge connector
(provided by motherboard manufacturer)
Two SLI-ready graphics cards of the same type. (Example: GV-N28-1GH-B)
- 11 - Hardware Installation
Loading...
+ 23 hidden pages