CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
`MB Intelligent Tweaker(M.I.T.)
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
Disabled()
CruiseCPU5%7%CPU
SportsCPU7%9%CPU
RacingCPU9%11%CPU
TurboCPU15%17%CPU
Full ThrustCPU17%19%CPU
CPU
CPU
Advanced Clock Control
>>>>>
Advanced Clock Control
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
CPU Clock Drive[800mV]
PCI Express Clock Drive[800mV]
CPU Clock Skew[0ps]
MCH Clock Skew[0ps]
Advanced Clock Control
Item Help
Menu Level`
KLJI: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: ExitF1: General Help
F5: Previous ValuesF6: Fail-Safe DefaultsF7: Optimized Defaults
- 41 -BIOS
CPU Clock Drive
CPU/
700mV800mV ()900mV1000mV
PCI Express Clock Drive
PCI Express/
700mV800mV () 900mV1000mV
CPU Clock Skew
CPU
0ps~750ps (0ps)
MCH Clock Skew
CPU
0ps~750ps (0ps)
******** DRAM Performance Control ********
Performance Enhance ()
Standard
Turbo()
Extreme
Extreme Memory Profile (X.M.P.)
BIOSXMPSPD
Disabled()
Profile1
Profile2
( )
(G)MCH Frequency Latch
Auto () 200MHz266MHz333MHz400MHz
System Memory Multiplier ()
FSBCPU
(G)MCH Frequency LatchAutoBIOSSPD
(Auto)
Memory Frequency (Mhz) ()
CPU Host Frequency (Mhz) System Memory Multiplier
DRAM Timing Selectable (SPD)
Manual
Auto ()Manual
>>>>> Standard Timing Control
CAS Latency Time
Auto ()3~7
( )
GA-EP43-DS3LR/DS3L/S3L- 42 -
tRCD
Auto ()1~15
tRP
Auto ()1~15
tRAS
Auto ()1~63
Advanced Timing Control
>>>>>
Advanced Timing Control
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
x tRRD2Auto
x tWTR2Auto
x tWR4Auto
x tRFC28Auto
x tRTP2Auto
x Command Rate (CMD)0Auto
>>>>> Channel A
x Static tRead Value4Auto
x tRD Phase0 Adjustment0Auto
x tRD Phase1 Adjustment0Auto
x tRD Phase2 Adjustment0Auto
x tRD Phase3 Adjustment0Auto
x Trd2rd(Different Rank)6Auto
x Twr2wr(Different Rank)6Auto
x Twr2rd(Different Rank)5Auto
x Trd2wr(Same/Diff Rank)8Auto
>>>>> Channel B
x Static tRead Value4Auto
x tRD Phase0 Adjustment0Auto
KLJI: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: ExitF1: General Help
F5: Previous ValuesF6: Fail-Safe DefaultsF7: Optimized Defaults
Advanced Timing Control
Item Help
Menu Level`
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
x tRD Phase1 Adjustment0Auto
x tRD Phase2 Adjustment0Auto
x tRD Phase3 Adjustment0Auto
x Trd2rd(Different Rank)6Auto
x Twr2wr(Different Rank)6Auto
x Twr2rd(Different Rank)5Auto
x Trd2wr(Same/Diff Rank)8Auto
KLJI: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: ExitF1: General Help
F5: Previous ValuesF6: Fail-Safe DefaultsF7: Optimized Defaults
Advanced Timing Control
Item Help
Menu Level`
- 43 -BIOS
Advanced Timing Control
********
********
tRRD
Auto ()1~15
tWTR
Auto ()1~31
tWR
Auto ()1~31
tRFC
Auto ()1~255
tRTP
Auto ()1~15
Command Rate(CMD)
Auto ()1~3
>>>>> Channel A
Static tRead Value
Auto ()1~15
tRD Phase0 Adjustment
Auto ()0-Normal1-Advanced
tRD Phase1 Adjustment
Auto ()0-Normal1-Advanced
tRD Phase2 Adjustment
Auto ()0-Normal1-Advanced
tRD Phase3 Adjustment
Auto ()0-Normal1-Advanced
Trd2rd(Different Rank)
Auto ()1~15
Twr2wr(Different Rank)
Auto ()1~15
Twr2rd(Different Rank)
Auto ()1~15
Trd2wr(Same/Diff Rank)
Auto ()1~15
>>>>> Channel B
Static tRead Value
Auto ()1~15
tRD Phase0 Adjustment
Auto ()0-Normal1-Advanced
tRD Phase1 Adjustment
Auto ()0-Normal1-Advanced
tRD Phase2 Adjustment
Auto ()0-Normal1-Advanced
GA-EP43-DS3LR/DS3L/S3L- 44 -
tRD Phase3 Adjustment
Auto ()0-Normal1-Advanced
Trd2rd(Different Rank)
Auto ()1~15
Twr2wr(Different Rank)
Auto ()1~15
Twr2rd(Different Rank)
Auto ()1~15
Trd2wr(Same/Diff Rank)
Auto ()1~15
******** Mother Board Voltage Control ********
>>> CPU
CPU Vcore
Auto
CPU Termination
Auto
CPU PLL
Auto
CPU Reference
Auto
>>> MCH/ICH
MCH Core
Auto
ICH I/O
Auto
>>> DRAM
DRAM Voltage
Auto
- 45 -BIOS
2-4Standard CMOS Features (CMOS)
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Date (mm:dd:yy)Wed, May 21 2008
Time (hh:mm:ss)18:25:04
` IDE Channel 0 Master[None]
` IDE Channel 0 Slave[None]
` IDE Channel 1 Master[None]
` IDE Channel 1 Slave[None]
` IDE Channel 2 Master[None]
` IDE Channel 3 Master[None]
` IDE Channel 4 Master[None]
` IDE Channel 4 Slave[None]
POST
No Errors
All Errors
All, But Keyboard()
All, But Diskette
All, But Disk/Key
Memory ()
BIOSPOST (Power On Self Test)
Base MemoryPC640 KBMS-DOS
Extended Memory
Total Memory
- 47 -BIOS
2-5Advanced BIOS Features (BIOS)
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
` Hard Disk Boot Priority[Press Enter]
First Boot Device[Floppy]
Second Boot Device[Hard Disk]
Third Boot Device[CDROM]
Password Check[Setup]
HDD S.M.A.R.T. Capability[Disabled]
CPU Multi-Threading
Limit CPUID Max. to 3
No-Execute Memory Protect
CPU Enhanced Halt (C1E)
C2/C2E State Support
x C4/C4E State Support
CPU Thermal Monitor 2(TM2)
CPU EIST Function
Virtualization Technology
Delay For HDD (Secs)[0]
Full Screen LOGO Show[Enabled]
Init Display First[PCI]
KLJI: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: ExitF1: General Help
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
SATA RAID/AHCI Mode 3[Disabled]
SATA AHCI Mode 12[Disabled]
SATA Port0-3 Native Mode[Disabled]
USB Controller[Enabled]
USB 2.0 Controller[Enabled]
USB Keyboard Support[Disabled]
USB Mouse Support[Disabled]
Legacy USB storage detect[Enabled]
Azalia Codec[Auto]
Onboard H/W LAN[Enabled]
Green LAN[Disbabled]
` SMART LAN[Press Enter]
Onboard LAN Boot ROM[Disabled]
Onboard IDE Controller[Enabled]
Onboard Serial Port 1[3F8/IRQ4]
Onboard Parallel Port[378/IRQ7]
Parallel Port Mode[SPP]
KLJI: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: ExitF1: General Help
F5: Previous ValuesF6: Fail-Safe DefaultF7: Optimized Defaults
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Reset Case Open Status[Disabled]
Case OpenedNo
Vcore1.332V
DDR18V1.840V
+3.3V3.296V
+12V12.048V
Current System Temperature30oC
Current CPU Temperature47oC
Current CPU FAN Speed3375 RPM
Current SYSTEM FAN2 Speed0 RPM
Current POWER FAN Speed0 RPM
Current SYSTEM FAN1 Speed0 RPM
CPU Warning Temperature[Disabled]
CPU FAN Fail Warning[Disabled]
SYSTEM FAN2 Fail Warning[Disabled]
POWER FAN Fail Warning[Disabled]
SYSTEM FAN1 Fail Warning[Disabled]
CPU Smart FAN Control[Enabled]
KLJI: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: ExitF1: General Help
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
`MB Intelligent Tweaker(M.I.T.)
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
Load Fail-Safe Defaults (Y/N)? N
KLJI
Load Fail-Safe Defaults
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
<Enter><Y>BIOS
2-11 Load Optimized Defaults ()
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
`MB Intelligent Tweaker(M.I.T.)
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
Load Optimized Defaults (Y/N)? N
KLJI
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
BIOS
Load Optimized Defaults
<Enter><Y>BIOS
BIOSBIOS
CMOS
GA-EP43-DS3LR/DS3L/S3L- 58 -
2-12 Set Supervisor/User Password (/)
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
`MB Intelligent Tweaker(M.I.T.)
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
Enter Password:
KLJI
Change/Set/Disable Password
<Enter>8<Enter>
BIOS
Supervisor ()
Advanced BIOS FeaturesPassword Check
SetupBIOS
SystemBIOS
User ()
Advanced BIOS FeaturesPassword Check
System
BIOS
BIOSBIOS
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
<Enter>BIOS
<Enter>PASSWORD DISABLED
BIOS
- 59 -BIOS
2-13 Save & Exit Setup ()
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
`MB Intelligent Tweaker(M.I.T.)
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
Save to CMOS and EXIT (Y/N)? Y
KLJI
Save Data to CMOS
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor PasswordSet User Password
Save & Exit Setup
Exit Without Saving
<Enter><Y>BIOS
<N> <Esc>
2-14 Exit Without Saving ()
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
`MB Intelligent Tweaker(M.I.T.)
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
Quit Without Saving (Y/N)? N
KLJI
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Abandon all Data
<Enter><Y>BIOSBIOS
<N> <Esc>
GA-EP43-DS3LR/DS3L/S3L- 60 -
3-1
•
(Windows XP)
•
(
Run.exe)
Xpress Install
Xpress InstallXpress Install
•Xpress Install (
)
•Xpress Install
•
•Windows XPUSB 2.0Windows XP Ser-
vice Pack 1"\
""?"("")
(USB 2.0)
- 61 -
3-2
3-3()
GA-EP43-DS3LR/DS3L/S3L- 62 -
3-4
3-5
- 63 -
3-6Download Center
BIOSDownload Center
BIOS
GA-EP43-DS3LR/DS3L/S3L- 64 -
4- 1Xpress Recovery2
Xpress Recovery2
NTFSFAT32FAT16
PATASATA
• Xpress Recovery2*
• Xpress Recovery2
(10 GB
)
•Xpress Recovery2
•
•
®
• Intel
•64 MB
•VESA
• Windows® XP SP1( )
• Xpress RecoveryXpress Recovery2Xpress Recovery
Xpress Recovery2
•USB
•RAID/AHCI
(*)PATA IDE1/IDE2... SATA port0/port1/
port2...PATA IDE1SATA
port0PATA IDE1SATA port0
SATA port1SATA port0
- 65 -
Xpress Recovery2
(Windows XP)
A. Windows XP
1.BIOSAdvanced BIOS FeaturesCD-ROM
2.(1)()Xpress Recovery2
10 GB(2)
12
3.NTFS(3)
3
- 66 -GA-EP43-DS3LR/DS3L/S3L
4.(4)
Xpress Recovery2Xpress
Recovery2( 5)
5
4
5.
(67)
Xpress Recovery2
6
Xpress Recovery2
7
- 67 -
B. Xpress Recovery2
1.Xpress Recovery2"Press
any key to startup XpressRocovery2" ( 8)Xpress Recovery2
.
.
Boot from CD/DVD:
Press any key to startup XpressRecovery2.....
2.Xpress Recovery2Xpress Recovery2
BIOSPOST<F9>(9)
Award Modular BIOS v6.00PG, An Energy Star Ally
Copyright (C) 1984-2008, Award Software, Inc.
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
`MB Intelligent Tweaker(M.I.T.)
`Standard CMOS Features
`Advanced BIOS Features
`Integrated Peripherals
`Power Management Setup
`PnP/PCI Configurations
`PC Health Status
ESC: QuitKLJI: Select ItemF11: Save CMOS to BIOS
F8: Q-FlashF10: Save & Exit SetupF12: Load CMOS from BIOS
Load Optimized Defaults (Y/N)? Y
Load Optimized Defaults
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
SATA RAID/AHCI Mode[RAID]
SATA Port0-3 Native Mode[Disabled]
USB Controller[Enabled]
USB 2.0 Controller[Enabled]
USB Keyboard Support[Disabled]
USB Mouse Support[Disabled]
Legacy USB storage detect[Enabled]
Azalia Codec[Auto]
Onboard H/W LAN[Enabled]
Green LAN[Disbabled]
` SMART LAN[Press Enter]
Onboard LAN Boot ROM[Disabled]
Onboard IDE Controller[Enabled]
Onboard Serial Port 1[3F8/IRQ4]
Onboard Parallel Port[378/IRQ7]
Parallel Port Mode[SPP]
KLJI: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: ExitF1: General Help
F5: Previous ValuesF6: Fail-Safe DefaultF7: Optimized Defaults
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Integrated Peripherals
1
Item Help
Menu Level`
BIOS
BIOS
BIOS
GA-EP43-DS3LR/DS3L/S3L- 80 -
C. RAID BIOSRAID
SATARAID BIOSSATA RAID
RAID
BIOS POST(
2)<Ctrl> + <I>ICH10R RAID BIOS
Intel(R) Matrix Storage Manager option ROM v8.5.0.1013 ICH10R wRAID5
Copyright(C) 2003-08 Intel Corporation. All Rights Reversed.
RAID Volumes :
None defined.
Physical Disks :
PortDrive ModelSerial #SizeType/Status(Vol ID)
0ST3120026AS3JT354CP111.7GB Non-RAID Disk
1ST3120026AS3JT329JX111.7GB Non-RAID Disk
Press <CTRL - I> to enter Configuration Utility..
2
3ICH10R RAID(3)
(Create RAID Volume)
Create RAID Volume<Enter>RAID
Intel(R) Matrix Storage Manager option ROM v8.5.0.1013 ICH10R wRAID5
Copyright(C) 2003-08 Intel Corporation. All Rights Reversed.
1. Create RAID Volume
2. Delete RAID Volume
[ MAIN MENU ]
3. Reset Disks to Non-RAID
4. Exit
RAID Volumes :
None defined.
Physical Disks :
PortDrive ModelSerial #SizeType/Status(Vol ID)
0ST3120026AS3JT354CP111.7GB Non-RAID Disk
1ST3120026AS3JT329JX111.7GB Non-RAID Disk
[KL]-Select [ESC]-Exit[ENTER]-Select Menu
[ DISK/VOLUME INFORMATION ]
3
- 81 -
CREATE VOLUME MENUName
16<Enter>
RAID(RAID Level) (4) RAID(RAID Level)RAID 0RAID 1
RAID 10RAID 5RAID
<Enter>
Intel(R) Matrix Storage Manager option ROM v8.5.0.1013 ICH10R wRAID5
Copyright(C) 2003-08 Intel Corporation. All Rights Reversed.
( )Windows Vista 64-bitMSM64
GA-EP43-DS3LR/DS3L/S3L- 86 -
5-1-3SATA RAID/AHCI
SATA RAID/AHCIBIOS
Windows VistaXPSATA
A. Windows XP
Windows XPPress F6 if you need
to install a 3rd party SCSI or RAID driver<F6>(1)
Windows Setup
Press F6 if you need to install a third party SCSI or RAID driver.
1
SATA RAID/AHCI<S>(2)
Windows Setup
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage devices(s)
<none>
* To specify additional SCSI adapters, CD-ROM drives, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
Intel(R) ICH8R/ICH9R/ICH10R SATA RAID Controller(AHCI
Intel(R) ICH10R SATA AHCI Controller)<Enter> (3)
SATA
Windows Setup
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
Intel(R) ESB2 SATA AHCI Controller
Intel(R) ICH7R/DH SATA AHCI Controller
Intel(R) ICH7M/MDH SATA AHCI Controller
Intel(R) ICH8R/DH/DO SATA AHCI Controller
Intel(R) ICH8M-E/M SATA AHCI Controller
Intel(R) ICH9R/DO/DH SATA AHCI Controller
Intel(R) ICH9M-E/M SATA AHCI Controller
Intel(R) ICH10R SATA AHCI Controller
Intel(R) ESB2 SATA RAID Controller
Intel(R) ICH7R/DH SATA RAID Controller
Intel(R) ICH7MDH SATA RAID Controller
Intel(R) ICH8R/ICH9R/ICH10R SATA RAID Controller
Intel(R) ICH8M-E/ICH9M-E SATA RAID Controller
ENTER=Select F3=Exit
3
SATA RAID/AHCI
4<Enter>
Windows Setup
Setup will load support for the following mass storage device(s):
Intel(R) ICH8R/ICH9R/ICH10R SATA RAID Controller
* To specify additional SCSI adapters, CD-ROM drives, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.