Gigabyte GA-6WOZ7 User Manual [zh]

Phone/Fax No: (818) 854-9338/ (818) 854-9339
hereby declares that the product
Product Name:
Model Number:
Mother Board
Signature:
GA-6WOZ7
FCC Compliance Statement:
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
This equipment has been tested and found to comply with limits for a Class B digital device ,
Responsible Party Name: G.B.T. INC.
Address: 18305 Valley Blvd., Suite#A
LA Puent, CA 91744
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful and (2) this device must accept any inference received, including that may cause undesired operation.
Representative Person's Name: ERIC LU
Eric Lu
Date: Sep. 10, 1999
frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or
television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit dif ferent from that to which the receiver is connected
-Consult the dealer or an experienced radio/television technician for additional suggestions
You are cautioned that any change or modifications to the equipment not expressly approve by the party responsible for compliance could void Your authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation.
Declaration of Conformity
We, Manufacturer/Importer
(full address)
G.B.T. Technology Träding GMbH
Ausschlager Weg 41, 1F, 20537 Hamburg, Germany
( description of the apparatus, system, installation to which it refers)
(reference to the specification under which conformity is declared)
in accordance with 89/336 EEC-EMC Directive
EN 55011 Limits and methods of measurement EN 61000-3-2* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-2 by household appliances and similar
industrial, scientific and medical (ISM electrical equipment “Harmonics” high frequency equipment
EN55013 Limits and methods of measurement EN61000-3-3* Disturbances in supply systems caused of radio disturbance characteristics of EN60555-3 by household appliances and similar broadcast receivers and associated electrical equipment “Voltage fluctuations” equipment
EN 55014 Limits and methods of measurement EN 50081-1 Generic emission standard Part 1: of radio disturbance characteristics of Residual, commercial and light industry household electrical appliances, portable tools and similar electrical EN 50082-1 Generic immunity standard Part 1: apparatus Residual, commercial and light industry
EN 55015 Limits and methods of measurement EN 55081-2 Generic emission standard Part 2: of radio disturbance characteristics of Industrial environment fluorescent lamps and luminaries
EN 55020 Immunity from radio interference of EN 55082-2 Generic immunity standard Part 2: broadcast receivers and associated Industrial environment equipment
EN 55022 Limits and methods of measurement ENV 55104 Immunity requirements for household of radio disturbance characteristics of appliances tools and similar apparatus information technology equipment
DIN VDE 0855 Cabled distribution systems; Equipment EN 50091- 2 EMC requirements for uninterruptible
part 10 for receiving and/or distribution from power systems (UPS)
part 12 sound and television signals
declare that the product
Mother Board
GA-6WOZ7
is in conformity with
CE marking (EC conformity marking)
The manufacturer also declares the conformity of above mentioned product
EN 60065 Safety requirements for mains operated EN 60950 Safety for information technology equipment
electronic and related apparatus for including electrical business equipment household and similar general use
EN 60335 Safety of household and similar EN 50091-1 General and Safety requirements for electrical appliances uninterruptible power systems (UPS)
Signature
with the actual required safety standards in accordance with LVD 73/23 EEC
Date : Sep. 10, 1999 Name : Rex Lin
(Stamp)
Manufacturer/Importer
Rex Lin
:
6WOZ7
Intel 810 Socket 370 主機板
中文安裝手冊
INTEL 810 Socket 370處理器 主機板
REV. 1.3 First Edition
R-13-01-091209C
使用手冊之組織架構
此安裝手冊是依下列章節組織而成:
1) 版本修改摘要
2) 清點附件
3) 特色摘要
4) 硬體設定
5) 效能測試和晶片組功能方塊圖
6)Suspend to RAM STR 安裝說明
7) BIOS 功能設定 BIOS功能設定指南
8) 附錄
使用手冊版本修改資訊
產品盒內附件清單
主機板詳細資訊和規格
主機板安裝指南
主機板效能測試結果和晶片組功 能方塊圖
參考資料
目 錄
版本修改摘要
清點附件
特色彙總
6WOZ7主機板的元件配置圖 P.5
CPU 速度設定 / 插座及接腳設定的快速安裝指南 P.6
效能測試
晶片組功能方塊圖
安裝Suspend to RAM 功能 P.24
記憶體安裝指南
BIOS 組態設定目錄 P.31
附錄
P.1
P.2
P.3
P.22
P.23
P.30
P.63
6WOZ7 主機板
版本修改摘要
版本 修改摘要 日期
1.3 6WOZ7 主機板中文安裝手冊首版發行。 Dec.1999
本手冊所有提及之商標與名稱皆屬該公司所有。
本手冊若有任何內容修改,恕不另行通知。
1999129台北,台灣
1
清點附件
þ6WOZ7主機板一片 þ軟、硬碟插座排線各一條 þ主機板驅動程式光碟片(IUCD) o內接式 COMB 接頭排線 (Optional) o內接式 USB 接頭排線(Optional) o SCSI 裝置排線 þ6WOZ7中文使用手冊
清點附件
2
6WOZ7 主機板
特色彙總
規格
Ÿ 主機板採四層設計 Mini NLX 規格
( 25.7公分 x 20.5公分 )
CPU
晶片組
時脈產生器 記憶體
Ÿ Celeron Ÿ CPU 內建128 KB 2nd 快取記憶體
Intel FW82810 , 包括:
Ÿ 82810DC100 Graphics and memory 控制器(GMCH) Ÿ 82801AA I/O Controller Hub(ICH) Ÿ 支援66 / 100MHz Ÿ 2 168-pin DIMM 插槽 Ÿ 支援SDRAM 16MB~256MB Ÿ 僅支援3.3V SDRAM DIMM
TM
Socket 370 處理器
I/O 控制器 Ÿ Winbond 83627 擴充槽
Ÿ 2 32-bit PCI Bus 擴充槽 Ÿ 1 16-bit ISA Bus 擴充槽(Optional)
內建IDE Ÿ IDE 控制器內建在Intel 82801AA (ICH) PCI 晶片內,
提供 PIO, Bus Master , Ultra DMA/33及ATA 66 操作模式IDE HDD/CD-ROM
Ÿ 可連接四個IDE裝置
內建周邊設備
Ÿ 1 個軟碟插座支援兩台磁碟機
(360K ,720K ,1.2M ,1.44M 2.88M bytes)
Ÿ 1 個並列插座可支援 SPP/EPP/ECP 模式 Ÿ 2 個串列插座(COMA & COMB) Ÿ 2 個USB 插座 Ÿ 1 個紅外線連接端(可連接 IR/CIR) (Optional)
硬體監控
Ÿ CPU/電源供應器/系統風扇轉速偵測 Ÿ CPU / 系統風扇控制 Ÿ 系統電壓自動偵測 Ÿ CPU 過熱警報器 Ÿ 防侵入保護 Ÿ 顯示真實電壓值
續下頁…
3
內建音效
內建 LAN
PS/2 插座 BIOS Ÿ 使用經授權 AWARD BIOS, 4M bit 快閃記憶體
附加特色
Ÿ 支援YAMAHA YMF-744 (Optional) AC’97 codec Ÿ 支援Line In / Line Out / Mic In / AUX In / CD In / TEL /
SPDIF(Optional)/ Game Port
Ÿ Intel Ÿ PS/2
Ÿ 內接型/外接型數據機開機功能 Ÿ 鍵盤密碼開機功能 Ÿ 網路遠端開機功能 Ÿ 支援 AC back電源管理模式
GD 82559(Optional)
鍵盤 連接埠及PS/2 滑鼠連接埠
特色彙總
4
6WOZ7 主機板
6WOZ7主機板的元件配置圖
COMA
LPT
VGA
JP8
PS/2
JP27
DFP
COMB
LAN
JP18
USB
JP25
YMF744
MIC
LINE
IN
JP23
LINE OUT
J2
82559
JP16
GMCH
82810
6WOZ7
JP6
J1
CPU
PGA 370
DIMM1
DIMM2
J5
JP1
J6 J7 J8
JP7
JP10
JP28
JP14
JP13
BAT1
ICH
82801
JP19
FWH32
JP12
JP26 JP24
BZ1
JP21
5
6WOZ7 主機板元件配置圖
$ CPU 速度設定 / 插座及接腳設定的快速安裝指南
CPU 速度設定 P.7
插座 遊戲搖桿及音源插座
COMA / COMB串列插座/ VGA 插座/ LPT 並列插座 P.8 USB 規格插座 P.9 PS/2 鍵盤及PS/2 滑鼠插座 P.9 CPU / 系統散熱風扇電源接腳 P.10 DFP 插座 [Optional] P.11 內建 LAN 插座 [Optional] P.11 J2 (光碟機音源線接腳) P.12 JP25 (SPDIF接腳) (提供數位音效輸出到喇叭或供給AC杜比解碼 ) [Optional] JP26 (AUX IN接腳) P.13 TEL(數據機內部發聲接腳) P.13 JP1 (STR 指示燈連接頭 & DIMM LED) P.14 接腳定義說明 JP12 (清除 CMOS 功能) P.15 JP18 (內建音效卡功能選擇接腳) [Optional] P.15 JP1 6 (內建 LAN 功能選擇接腳) [Optional] P.16 JP28 (系統啟動方式選擇接腳) P.16 JP14 (自動重新開機功能接腳) P.17 JP8 (鍵盤開機功能接腳) P.17 JP27 (USB 設備喚醒功能接腳) P.18 JP21 (內建蜂鳴器開關接腳) [Optional] P.18 JP19 (Top Block Lock接腳) P.19 JP10 (主機外殼開啟警示接腳) P.19 JP13 (STR/內建網路喚醒功能接腳) P.20 J5~J8 (系統偵測LED 接腳) P.21
頁數
P.8 P.8
P.12
P.15
6
6WOZ7 主機板
CPU 速度設定
您可以利用JP6來做系統外頻切換, 選擇 66 / 100MHz 及 Auto 或由 BIOS自動去偵測控 制.
M請注意主機板上DIP SWITCH設定的倍頻及外頻,需要和CPU的倍頻及外頻相
符合,否則易造成系統當機。
JP6 : CPU 速度設定
JP6
1
接腳 定義
1-2 Auto 2-3 FORCE 66MHz NC FORCE 100MHz
1
我們建議您依據您的硬體規格來設定系統速度,例如 : CPU,顯示卡, 記憶體..
定。
7
插座及接腳設定的快速安裝指南
Line Out
MIC
1
2
插座
遊戲搖桿及音源插座
Audio Port
1
Game Port
Line In
COMA / COMB串列插座/ VGA 插座/ LPT 並列插座
LPT PORT
VGA
10
9
COM A
COM B
8
6WOZ7 主機板
1
2
USB 規格插座
PS/2 鍵盤及PS/2 滑鼠插座
PS/2
4
PS/2
1 2 3
8 7 6 5
4
滑鼠
鍵盤
接腳 定義
1 USB V0 2 USB D0­3 USB D0+ 4 接地線
5 USB V1 6 USB D1­7 USB D1+ 8
PS/2
接腳
5 6
3
1 2 3 4 VCC(+5V) 5 6
接地線
鍵盤/滑鼠
資料訊號線
定義
無作用 接地線
時脈
無作用
9
CPU 散熱風扇電源接腳
系統散熱風扇電源接腳
插座及接腳設定的快速安裝指南
1
接腳 定義
1 接地線 2 +12V
3 偵測訊號線
1
接腳 定義
1 接地線 2 +12V
3 偵測訊號線
10
6WOZ7 主機板
DFP 插座 (Optional)
內建 LAN 插座 (Optional)
1 2
黃燈
1 – (LAN Active LED) 2 – (LAN Link LED)
綠燈
11
插座及接腳設定的快速安裝指南
12
6WOZ7 主機板
J2 : (光碟機音源線接腳)
1
接腳
定義
1 CD-L 2
3
接地線 接地線
4 CD-R
JP25 : SPDIF接腳(提供數位音效輸出到喇叭或供給AC杜比解碼 器) (Optional)
1
接腳
1 2 SPD OUT 3
定義 電源
接地線
13
JP26 : AUX IN 接腳
TEL : 數據機內部發聲接腳
插座及接腳設定的快速安裝指南
1
接腳 定義
1 AUX-L 2 接地線
3 接地線 4 AUX-R
1
接腳
定義
1 Signal-in 2
接地線 3 接地線 4 Signal-out
14
6WOZ7 主機板
JP1 : STR 指示燈連接頭 & DIMM LED
STR 指示燈外部連接頭
DIMM LED
+
1
15
6WOZ7 主機板
接腳定義說明
JP12 : 清除 CMOS 功能接腳
1
接腳
1-2 短路 清除 CMOS
短路 一般運作(預設值)
2-3
JP18 : 內建音效卡功能選擇接腳(Optional)
定義
1
接腳
短路 關閉內建音效卡功能
1-2
短路 開啟內建音效卡功能
2-3
(預設值)
定義
15
Loading...
+ 57 hidden pages