Gigabyte ECO600, ECO500 User Manual

Wireless

LASER MOUSE

User's Guide

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference. and
(2) This device must accept any interference received, including interference that may cause
undesired operation.

This symbol on the product or in the instructions means that your electrical and electronic equipment should
be disposed at the end its life separately from your household waste. There are sparate collection system for
recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased the product.

ECO600 Long-lasting Wireless Laser Mouse
Model nr: 28713ECO600
FCC ID: JCK28713ECO600

GIGABYTE Nano recevier

Model nr: 28713C55RX
FCC ID: JCK28713C55RX

Wheel button

ID reset button

Mouse

Introduction

Congratulations on your purchase of the most innovative mini wireless mouse. With an
incredible sensitivity to surface details and high tracking speed than other mice, the mouse
can track reliably even on tricky polished or wood-grain surfaces. It offers even more
advance that will make you more productive and more comfortable.

A. Hardware Installation

2.4GHz (distance 6~8m), 16 Channels/216 ID
Using state-of-art technology. High tracking speed and sensitivity.
Nano receiver.
Longer battery life.
Auto-Link, Plug and Play! No need to set the channel ID.
Power on/off switch.
Ergonomic design.
800/1200/1600 dpi switchable.
Rubber side grips.
2*AA Alkaline batteries included.

Power on/off switch

This product complies with IEC 60825-1, Class I laser product.
The product complies with FCC and CE rules.

Safety Notice

Please DO NOT direct the
laser beam at anyone's eyes.

Features

+

-

A wrong battery placement
may cause batteries overheat.

Battery compartment cover

2 * AA batteries

Battery cover

The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any
button of the mouse" is compulsory to wake it up.

Power on/off:

There is a Power on/off switch designed to save the batteries power while non-usage of a longer period.
User can push DPI button to change the resolution. The LED on wheel bar will be flashed when dpi has been
successfully switched.

Receiver

Internet Forward & Backward button

1. Insert the batteries

a. Remove the battery compartment cover on the top case of the mouse.
b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet.
c. Close the battery compartment cover properly.
d. Make sure the Power on-off switch on the bottom of the mouse is ON.
e. The Low Power LED on the wheel bar will be on for 6 seconds if the mouse power is on.

Receiver

Dpi (+)button
Dpi

(-)

button

Dpi light indicator

800 dpi 1200 dpi 1600 dpi