GF Signet 9900 User Manual

Signet 9900 4 to 20 mA Output Module Instruction Sheet

*3-9900-398-1.090*

3-9900-398-1.090 Rev. A 12/13

The optional 4 to 20 mA Output Module adds an additional 4 to 20 mA loop output to a Signet 9900 Transmitter.
Requires the 9900 Generation III or later. NOTE: Verify 9900 Transmitter generation under the OPTIONS Menu.

3-9900-1P Panel Mount

English

Mfr. Part No. Code Description

3-9900.398-1 159 001 784
6682-1102 159 001 710

4 to 20 mA Output Module
Open Collector Plug, 2 Pos, Right Angle

The 4 to 20 mA Output Module is only compatible with the 9900 Transmitter
Generation III or later:

• Panel Mount version 9900-1P (159 001 695)

• Field Mount version 9900-1 (159 001 696)

NOTE: The 4 to 20 mA Output, Direct Conductivity, and Batch Modules

share the same installation site on the 9900 base unit.
Only one of these modules can be used per 9900 Transmitter.

Features:

• 4 to 20 mA Output Module can be powered using Loop Power or
DC Power in the 9900 base unit.

• Independent settings for the loop currents of the Output Module and
9900 base unit (Error, Loop Adjustments, etc.).

• The Primary or Secondary (if applicable) measurement of a compatible
sensor can be selected as the loop source.

• The same source (Primary or Secondary measurement) can be used for
Loop 1 in the 9900 base unit and Loop 2 in the Output Module.

PWR+
PWR–

Loop+
Loop–

Loop2+
Loop2–

Red

Black

Blue

Power Supply

+

10.8 to 35.2 VDC

–

PLC or Recorder

+

Loop 1 Input

–

4 to 20 mA

PLC or Recorder

Blue

+

Loop 2 Input

–

4 to 20 mA

CAUTION: Exercise care when

installing module.
Do not bend connecting pins.
Align pins and connectors then push module

firmly into place, then attach with screw.

Avoid Electrostatic Discharge (ESD):

● Minimize handling of module to reduce
the possibility of damage due to ESD.

● Handle module by the edges.

● Never touch any exposed circuitry or
contacts.

● Wear an anti-static wristband or stand
on an anti-static mat, or keep one
hand touching a properly grounded
pipe or other properly grounded piece
of metal when handling module.

For more information, please download the full 9900 Transmitter manual at www.gfsignet.com

Georg Fischer Signet LLC, 3401 Aero Jet Avenue, El Monte, CA 91731-2882 U.S.A. • Tel. [phone] • Fax [phone]
For Worldwide Sales and Service, visit our website: www.gfsignet.com • or call (in the U.S.): [phone]
For the most up-to-date information, please refer to our website at www.gfsignet.com

3-9900-398-1.090 Rev. A 12/13 © Georg Fischer Signet LLC 2013