GE Security 430083501, 470336502 User Manual

UPGRADE FROM THE IBM 5029 READER

The CASI Model 430 and 435 Magnetic Stripe readers are
rugged, reliable, and easy to install. Model 430 is a magnet­ic stripe technology reader that can emulate the operation of
an IBM 5029 reader, allowing for communication with older
IBM microcontrollers. Simply set a jumper to select 5029
emulation mode.

Model 435 incorporates a keypad into a magnetic stripe
technology reader and can also operate in IBM 5029 emula­tion mode; however, all keypad functions will be disabled.

These readers can easily replace existing IBM Model 5029
readers without the need to rewire or change existing micro­controllers. Simply unplug the 5029 reader and plug in the
Model 430 or 435 reader to the reader’s 9-pin connector.

MAGNETIC STRIPE TECHNOLOGY

The Model 430 and 435 readers will read any magstripe
badge with data written in standard ABA format on track two.

INTELLIGENT MICROCONTROLLER COMMUNICATION

Model 430/435 readers communicate with the microcontroller
through a bi-directional data link. This link carries information,

such as keypad input, magnetic stripe data, command
responses, and status messages to the microcontroller.

VOLTAGE AUTO-SENSING

Both the Model 430 and 435 readers can auto-sense an
input voltage range of 12V to 48V DC and automatically
adjust accordingly.

FEATURES

• Reads ABA track 2 format magnetic stripe cards

• 12V to 48V DC input–auto-sense

• One mile communication distance from reader
to microcontroller

• Two operation modes: standard CASI Supervised
F2/F communication and IBM 5029 mode. Each
jumper selectable

• Keypad for PIN number entry (Model 435 only)

• Red, green, yellow LED indicators and beeper

• Door strike relay included

• Rugged cast aluminum housing

• Weather-resistant

• Optional reader heater available

Model 430/435

Magnetic Stripe Reader

GE Interlogix, CASI division
791 Park of Commerce Boulevard
Suite 100, Boca Raton, FL 33487
Tel: [phone]
U.S.A. Toll Free: 1 [phone]
Fax: [phone]
Internet: http://www.ge-interlogix.com,
www.casi-rusco.com

General Information
E-mail: [e-mail]

Customer Support
E-mail: [e-mail]
U.S.A. Toll Free: 1 [phone]
International: [phone]

Training Department
E-mail: [e-mail]

For the Authorized CASI Business
Partner Nearest You:

United States/Canada
Tel: [phone]

Asia/Pacific
Tel: [phone]

Northern Europe
Tel: [phone]

Southern Europe /
Middle East / Africa
Tel: [phone]

Latin America/Caribbean
Tel: [phone]

CUSTOMER SUPPORT

GE Interlogix and its CASI Business Partner Network offer a
full range of support services including site surveys, instal­lation supervision and training. Emergency support is avail­able 24 hours a day, seven days a week.

FOR MORE INFORMATION

Please contact the authorized CASI Business Partner listed
below to see how Model 430 or 435 Magnetic Stripe read­ers can meet your specific requirements.

Literature contents may change at any time without notice.
Other product and company names herein may be the trademarks of their respective owners.
GE and GE Interlogix are registered trademarks of the General Electric Company.

©2000-2002 GE Interlogix, Inc. All rights reserved. 465141001Ce/02-00

Model 430/435
Magnetic Stripe Reader

TECHNICAL SPECIFICATIONS

Color

Light Gray
Physical Dimensions
Height
Width
Depth

4.475 inches (114mm)

4.475 inches (114mm)

1.400 inches (36mm)
Operating Temperature

Range

–32 to 140°F
(0 to 60°C)

Operating Temperature
Range with optional
Cold Weather Kit

–40 to 140°F
(–40 to 60°C )

Humidity Range

0 to 95%,
non-condensing

Maximum Cabling Distance

(on standard 22 AWG telephone
wire)*

12V operation**
48V operation

2,000 ft. (671m)
5,280 ft. (1609k)
Minimum Wiring

4 conductor

Power Supply

Nominal 12V to 48V
DC, 130 mA

Door Strike Relay
Maximum contact rating
Maximum contact
voltage

0.75 amps***
28 volts AC or DC

*The reader will work well with unshielded cable in most
environments. No company, including GE Interlogix, can guarantee
that data will be reliably transmitted for long distances on unshielded
cable in every installation.

**12V operation implies that a 12V power supply is located within
2,000 ft. of the reader. The use of an auxiliary power supply close to
the reader may allow greater communication distances.

***A door strike relay is built into the reader. The life of the relay will
decrease as the current switched by the contacts is increased. Use
low current door strikes for high traffic doors to maximize the relay
life. Use an external relay for high current applications.

FUNCTIONAL SPECIFICATIONS

Compatibility

CASI
microcontrollers

Micro/2, Micro/4,
Micro/5-PX, Micro/5­PXN, Micro/PX-2000,
MicroProx

Other Products

Hosts that accept
F/2F magnetic strip
data in accordance
with the American
Banking Standard
for track two
numeric data

Badge Formats

First 4- to 16-digit
number conforming
to the ABA standard
for track two
numeric data
Tamper and Door Status
Switches

430 and 435
supervised mode only

Indicators

Red, Green, Yellow
LEDs and beeper

ORDERING NUMBERS

Model 430 Magnetic Stripe reader*

430083001
Model 435 Magnetic Stripe reader*,
with keypad

430083501

Model 43x reader cable

(required for

new installations).

320097001

Model 4xx wall plate, stainless steel.

470389001
Model 4xx door mount plate.

470382001
Model 4xx surface mount back box.

470336502
Model 4xx heater kit, 110/24VAC,

(see 560-92820-000 for heater
power transformer).

520159001

Installation wrench

385001001

*Installation wrench required