GE Security 430083001, 430083501 Specsheet

Product Data Sheet

Model 430/435

Overview

The Model 430 and 435 Magnetic Stripe Readers
are rugged, reliable, and easy to install. Model
430 is a magnetic stripe technology reader that
can emulate the operation of an IBM 5029 reader,
allowing for communication with older
microcontrollers. Simply set a jumper to select
5029 emulation mode.

Model 435 incorporates a keypad into a magnetic
stripe technology reader and can also operate in
IBM 5029 emulation mode - however, all keypad
functions are disabled.

These readers easily replace existing IBM Model
5029 readers without the need to rewire or
change existing microcontrollers. Simply unplug
the 5029 reader and plug in the Model 430 or 435
reader to the reader's DB-9 connector.

Magnetic Stripe Technology

The Model 430 and 435 readers will read any
magstripe badge with data written in standard
ABA format on track two.

Intelligent Microcontroller Communication

Model 430/435 readers communicate with the
microcontroller through a bi-directional data link.
This link carries information, such as keypad
input, magnetic stripe data, command responses,
and status messages to the microcontroller.

Voltage Auto-Sensing

The Model 430 and 435 readers auto-sense an
input voltage range of 12 VDC to 48 VDC and
automatically adjust.

Standard Features

E

Reads magnetic stripe cards ABA track two format

E

12 to 48 VDC input-auto-sense

Up to one mile communication distance from reader to

E

microcontroller

Two operation modes: standard UTC Supervised F2/F

E

communication and IBM 5029 mode, each jumper
selectable

E

Keypad for PIN number entry (Model 435 only)

E

Red, green, yellow LED indicators and beeper

E

Door strike relay included

E

Rugged cast aluminum housing

E

Weather-resistant

E

Optional cold weather heater kit available

Model 430/435

Specifications

Colour

Dimensions

Operating temperature

....with optional cold weather kit

Relative humidity

Max. cabling distance (on standard 22 AWG telephone wire)

12 VDC operation609 m

48 VDC operation1609 m

Wiring

Power supply

Door Strike Relay

Max. contact rating0.75 A

Max. contact voltage28 VAC or VDC

Compatibility with microcontrollers

Other products

Badge formats

Tamper and door status switches

Indicators

Grey

111 x 111 x 35 mm

0 to 60°C

-40 to 60° C

0 to 95%, non-condensing

The reader will work well with unshielded cable in most environments; no
company, including UTC, can guarantee that data will be reliably transmitted
for long distances on unshielded cable in every installation

12 VDC operation implies that a 12 VDC power supply is located within 609.6
m. of the reader; the use of an auxiliary power supply close to the reader may
allow greater communication distances

4 conductors (min.)

Nominal 12 VDC to 48 VDC, 130 mA

A door strike is built into the reader

The life of the relay will decrease as the current switched by the contacts is
increased; use low current door strikes for high traffic doors to maximize the
relay life; use an external relay for high current applications

Micro/2, Micro/4, Micro/5-PX, Micro/5-PXN, Micro/PX-2000

Hosts that accept F/2F magnetic strip data in accordance with the ABA for
track two numeric data

First 4- to 16-digit number conforming to the ABA standard for track two
numeric data

430 and 435 supervised mode only

Red, yellow and green LEDs and beeper

Ordering Information

Part No. Description

As a company of innovation, UTC Fire & Security reserves the right to change product specifications without notice. For the latest
product specifications, visit UTC Fire & Security online or contact your sales representative.

IPS-HQ-Model 430/435-2014-02-17 07:49:36