GE Security 353A-R-R-XXAP, 353A-R-XXAP Specsheet
GE
Fiber Optic
Security
Overview
The 353A intercom interface is used in combination with other
fiber optic transmission systems to provide two-way audio
transmission. The 353A is designed to provide the intercom
interface that links the remote panels to the master panel.
Maintains all Intercom Functions
It supports the features of intercoms manufactured by
Aiphone. All functions of the intercom systems to which the
links are interfaced, e.g., push-to-talk, call, and hands-free
operation, are transparent through the interface units.
Fiber Optic Compatibility
The 353A is intended to be used in conjunction with the B746AV
or the S764DAV fiber optic links, allowing the system integrator
to provide video, control and intercom audio all over one fiber.
u
Intercom Interface
Standard Features
• Two-way audio transmission
• Used with Aiphone intercom systems
• 20 Hz to 5 kHz bandwidth
• Standalone or rack configurations
• Two-way Contact Closure
Superior Diagnostics
The SMARTS™ diagnostic technology provides LEDs that
monitor the operating status of the audio and optical signals.
Two-Way,
4-Wire Intercom
Interface
353A
GE
GE
Security
Security
U.S.
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9239-1200
F 61-3-9239-1299
Europe
T
32-2-719-9847
F
32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
Specifications
Audio
Channels 1 duplex
Bandwidth 20 Hz to 5 kHz
Signal-to-Noise Ratio >50 dB (depending on
the fiber links used)
Input/Output Signal 6.6 V, +10 dBm
maximum
Input/Output Impedance
600 ohms
Electrical
Input Power, Standalone Units:
12-16 VAC or 13.5 VDC
regulated
Input Power, Rack Units: 13.5 VDC regulated
Current Requirement 150 mA
Power Consumption 2 W
Power Factor 2 (rack units only)
Protection Solid-state short
circuit protection
Optional Power Supply Model 610P (AC)
or Model 613P (DC)
optional
Rack Versions Only:
Two-way dry contact closures,
Tx Rx (Push to Call) Form A
Tx Rx (Gate Release) Form A
Environmental
Operating Temperature -40 to 167° F
(-40 to 75° C)
Maximum Humidity 95% relative,
noncondensing
Mechanical
Dimensions, (LWD) Standalone Units
4.0" x 4.55" x 1.22" (102 x 116 x 31 mm)
Dimensions, Rack Units 1 slot (1.0")
Weight, Standalone Units
0.62 lbs (0.28 kg)
Weight, Rack Units 0.55 lbs (0.25 kg)
Construction Aluminum
Related Diagram
Video In
Remote
Intercom
Audio
Tx
Tx
B746AVT
353A-T
Optical Fiber
Rx
B746AVR
Rx
353A-R
Video Out
Master
Intercom
Audio
Ordering Information
Use the Configurator below to select the options available for this product.
353A /1BXX
Product Type
TRTransmitter
∗ Optical Budget based on 62.5 μm fiber, for 50/125 μm fiber subtract 3 dB.
∗∗ Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
353A-2006-09-2
imagination at work
imagination at work
Receiver
Receiver
-
-
Enclosure
R Rack Card
Omit for Standalone unit
Loading...