GE Security 350A1-R-1BAP, 350A2-R-1BAP, 350A2-R-R-1BAP, 350A2-T-1BAP Specsheet
GE
Fiber Optic
Security
Overview
The 350A fiber links are designed specifically for interfacing
to the speakers of intercoms manufactured by Aiphone.
A complete system consists of a pair of transceivers
for connection to master and remote intercoms.
Maintains all Intercom Functions
Since transceivers have dedicated transmit and receive
functions, they are referred to herein as transmitters and
receivers. All functions of the intercom systems to which the
links are interfaced, e.g., push-to-talk, call, and hands-free
operation, are transparent through the interface units.
Superior Diagnostics
The SMARTS™ diagnostic technology provides LEDs that
monitor the operating status of the audio and optical signals.
u
Intercom Interface
Standard Features
• Two-way audio transmission over
one or two multimode fibers
• Used with Aiphone intercom systems
• 10 dB optical budget
• Operating distances up to 8.9 miles (14 km)
• Optical AGC circuitry
• Standalone or rack configurations
Two-Way,
Intercom
Interface
350A
GE
GE
Security
Security
U.S.
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9239-1200
F 61-3-9239-1299
Europe
T
32-2-719-9847
F
32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
Specifications
Audio
Channels 1 duplex
Bandwidth 20 Hz to 5 kHz Input
Signal-to-Noise Ratio >50 dB
Input/Output Signal Standard phone line
Input/Output Impedance
600 ohms
Optical
Mode Multimode
Optical Budget∗ 10 dB
(depending on model)
Emitter LED
Wavelength 850 and/or 1300 nm
(depending on model)
Operating Distance∗∗ Up to 8.9 miles (14 km)
(depending on model)
Gain Control Optical Automatic
Gain Control (OAGC)
Electrical
Input Power, Standalone Units:
12-14 VAC or 13.5 VDC
regulated
Input Power, Rack Units: 13.5 VDC regulated
Current Requirement 350 mA
Power Consumption 5 W
Power Factor 4 (rack units only)
Protection Solid-state short
circuit protection
Optional Power Supply Model 610P (AC)
or Model 613P (DC)
Rack Versions Only:
Two-way dry contact closures,
Tx Rx (Push to Call) Form A
Rx Tx (Gate Release) Form A
Environmental
Operating Temperature -40 to 167° F
(-40 to 75° C)
Maximum Humidity 95% relative,
noncondensing
Mechanical
Dimensions, (LWD) Standalone Units
4.0" x 4.55" x 1.22" (102 x 116 x 31 mm)
Dimensions, Rack Units 1 slot (1.0")
Weight, Standalone Units
0.50 lbs (0.23 kg)
Weight, Rack Units 0.55 lbs (0.25 kg)
Construction Aluminum
Related Diagram
Ordering Information
Use the Configurator below to select the options available for this product.
Intercom
Audio In/Out
∗ Optical Budget based on 62.5 μm fiber, for 50/125 μm fiber subtract 3 dB.
∗∗ Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
350A-2006-09-2
Transmitter
Optical Fiber
imagination at work
imagination at work
Receiver
Intercom
Audio In/Out
350A /1BAP
Receiver
No. of Fibers
121 Fiber
2 Fibers
-
Product Type
TRTransmitter
Receiver
Enclosure
R Rack Card
Omit for Standalone unit
Loading...