GE Security 2250D-R-1X3 Specsheet
GE
Fiber Optic
Security
Overview
250D and 2250D fiber links transmit up to 16 channels of low-speed
digital data, switch/status information, or control-function signals.
250D models feature multimode operation, while 2250D models
operate over single mode fiber.
Programmable Outputs
Using microprocessor technology, the user may program the
receiver to provide 16 channels of alternate-action outputs, or 16
channels of momentary outputs, or eight channels of each type.
Outputs are TTL drivers and Normally Open (NO) relays. A com plete system consists of a transmitter and a receiver, configured as
standalone units or as rack cards.
Superior Diagnostics
The SMARTS™ diagnostic technology provides system status LEDs
that monitor the status of the data path and the optical signal.
Data Transmitters and Receivers
Standard Features
One-way transmission
•
Single and multimode models available
•
16 contact closure or TTL channels
•
FM transmission
•
Operates up to 11 miles (18 km) (multimode) or 20 miles (32 km)
•
(single mode)
13 dB optical budget
•
Optical AGC
•
SMARTS™ diagnostics
•
Standalone and rack configurations
•
16-Channel Contact
Closure/TTL Data
250D and 2250D
GE
Security
U.S.
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9239-1200
F 61-3-9239-1299
Europe
T
32-2-719-9847
F
32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
Related Diagram
16 Contacts
In
Transmitter
Receiver
16 Contacts
Out
Specifications
Data 250D (Multimode) 2250D (Single Mode)
Channels 16 simplex
Formats Contact Closure, TTL
Baud Rate 200 bps
Contact Closure to Relay Output Time 5 ms
Operating Mode Asynchronous
Relay/Contact Rating 0.5 A @ 200 VDC
Bit Error Rate <1.0E-9
Optical
Mode Multimode Single Mode
Optical Budget 13 dB
Emitter LED Laser
Wavelength 850 nm or 1300 nm
Operating Distance Up to 11 mi (18 km)
Transmitter Launch Power -19 dBm
Receiver Sensitivity -32 dBm
Gain Control Optical Automatic Gain Control (OAGC)
Electrical
Input Power 13.5 VDC regulated (standalone);
Current Requirement 300 mA
Power Consumption 4 W
Power Factor 3
Protection Solid-state short circuit protection
Optional Power Supply Model 613P (DC)
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions (LWD), Standalone Units 9.31” x 6.33” x 1.15” (237 x 161 x 29 mm)
Dimensions, Rack Units 1 slot (1.0”)
Weight Standalone 1.27 lbs (0.58 kg); rack 0.66 (0.30 kg)
Construction Aluminum
∗
(depending on model)
∗∗
(depending on model)
13.5 VDC regulated (rack)
1310 nm
20 mi (32 km)
Optical Fiber
Ordering Information
Use the Configurators below to select the options available for these products.
∗ Optical Budget based on 62.5 μm fiber, for 50/125 μm fiber subtract 3 dB.
∗∗ Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
250D-2006-09-2
imagination at work
Loading...