Page 1
Internet Camera
( SD – 220 )
User，s Guide
Page 2
About the Manual
This manual describes the functions of Internet Camera components, installation
procedure, Web interface setup, as well as DVR application program operation.
Introduction
Users can connect Internet Camera to Ethernets, hi-speed Ethernets standard
network. Internet Camera differs from conventional PC cameras in such a manner
that Internet Camera is an independent system including 1 CPU and 1 Internet
Server that allows users to set up and monitor remotely by PC or Notebook via the
Internet.
Fields of applications
． Security and burglarproofing for households, offices, stores, banks, factories,
warehouses, etc.
． Care for the elders, children, etc.
． Admittance control for shopping lots, schools, communities, etc.
． Shopping via the Internet.
System Requirement
． JAVA-supportive and compatible Browser
． DVR supporting Windows 98, 2000, or XP
． CPU｡GPentium III compatible or above
． Memory｡G64MB or above
． Display card｡Gwith resolutions 1024X768 or above
． Hard disk space｡Gmore than 1GB hard disk space reserved if recorded via DVR
software
Page 3
Features
1. “Remote Eyes“- internet connectivity empowers you to vision what
happening at home while you are away at work or traveling
2. True DIY - No complicated camera cables to wire, or Ethernet connection to
your PC, everything is up and running in 20 minutes.
3. Products compatible with the 802.3 standard.
4. Built-in web server for Remote surveillance monitoring and remote
management via the Internet/Intranet.
5. Support: HTTP, ARP, TCP/IP, ICMP, PPPoE, SMTP
6. Unlimited IP Cam served.
7. Bundled PC application software of Digital Video Recording(DVR) provides
scheduling, recording, management, playback, transmitting, video quality
adjustment, and Remote DVR
8. Remote DVR capability allows any Internet client device (supports JAVA),
such as PC, PDA, Smart-phone, can access home surveillance, anytime and
anywhere.
9. Video quality up to VGA resolution.
10. QVGA(320*240) 5 frame per sec, VGA(640*480) 1 frame per sec
11. Advanced video compression to save PC storage. A 20G HDD will hold up to
one months＇pictures @1fps
12. Bundle professional DVR software.
13. No Server is needed: the highly efficient built-in CPU allows users to
connect their cameras to the Internet and work independently without a
computer or image Server.
14. Dynamic detection: once the intrusion is found, users will be notified via
e-mail.
15. Digital recording: the image data will be zipped and stored on the hard disk.
There is no need to change magnetic tapes.
16. Digital transmission: image data is transmitted digitally to ensure the
authenticity of the image quality.
Specifications
Page 4
Housing
1. Professional Type: Metal, changeable Lens
Video
1. Video Format: Motion Jpeg
2. Image Sensor: CMOS
3. Picture resolution: up to VGA(640 x 480), 24-bit color
4. Frame Rate: QVGA(320*240) 5 fps, VGA(640*480) 1 fps
5. Video Adjustment: Quality, Brightness
DVR
1. Running on PC Windows 98/98SE/ME/2000/XP, Celeron 300MHz or above,
with at least 200Mbyte space available
2. Microsoft-style, intuitive user interface, easy to operate
3. Password protection
4. Simultaneous viewing
a､ Simultaneous viewing of up to 25 cameras on a PC screen
b､ Only one voice can be heard
5. Flexible recording schedule for any hour any date
a､ Allow selection of a particular hour, or hours, continuous or not,
during a day.
6. Playback
a､ Allow viewing of archived files
b､ Preview of 6 sections simultaneously, each section representing a
period of 10 minutes within that hour
c､ Support picture Print, Pause, Fast Forward, Stop, and Recall
7. Memory capacity indication
a､Total HDD capacity allocated for surveillance
b､Free capacity indicator
c､Estimated total recorded hours
8. Historical Archive
a､Archive filed each hour
b､Can be viewed and extracted at an interval of 10 minutes for external
use
9. Motion detection
Page 5
a､User selectable Sensitivity Level to trigger detection
b､Target area selection for motion detection: total or Sub-area
c､When motion is detected, it will trigger a higher picture framing rate
d､Users can select to trigger an alarm, in the form of Email to be sent to
the pre-defined addresses
10. Alarm by form of emails
11. Remote DVR
a､Any remote PC or Java capable device is allowed to access the
cameras
b､Make Internet connection: Typing the DVR server’s IP address, which
is allocated by the ISP in the from of dynamic or static IP.
c､Each time a IP is changed, the DVR web server will automatically
inform the pre-defined address by sending emails
d､Recording: To view and record the remote pictures
e､Playback: to select a remote file and playback, allowing to pause, stop,
or fast forward.
12. Net DVR
a､To integrate all DVR Servers and network cameras into a network
surveillance system for centralized surveillance and administration.
b､Allows the system to be installed and administered in a flexible
manner; and enhances expansion.
c､To be integrated with the Airwave 955 series.
Unpacking the Internet Camera
Please take out the camera and all accessories from the box. Be sure you have all the
accessories as follows:
．Internet camera: 1 piece
．DVR installation CD: 1 piece
．AC transformer: 1 piece
．Camera stand: 1 piece
．Network cord: 1 piece
．Quick installation guide
If you find any accessories missing or damaged, please contact your distributor for
replacement.
Page 6
Hardware Description
Front Panel
● Lens: Exchangeable C/CS-type lens
Adjusting the Camera Focus
● To adjust the focus, please rotate the lens slowly until the picture becomes clear.
● When you adjust the focus, please do not rotate the lens too much so as not to
drop the lens.
Replacing the Lens
The Internet Camera can be replaced with any stand C or CS type lens
1. Wind the lens to remove the lens
2. Turn the new lens all the way to the end
Turn the lens slowly and adjust the focus until the picture becomes clear
Rear Panel
● Reset button: Push reset button for 3 seconds, the system will be reset to default
value.
● Network Cable Connecto r: The Internet Camera has a RJ45 connector for
connection to 10/100Base-TX Fast Ethernet
DC Power Connector: The DC Power Connector connects the AC power adapter to
supply power to Internet Camera.
Page 7
Button Panel
Bracket Cavity: The Bracket Cavity is used to connect the camera stand onto Internet
Camera by attaching the screw head on the camera stand into the mounting cavity
Internet Camera.
Hardware Installation
1. Connect an Ethernet cable
Connect an Ethernet cable to the network cable connector located on Internet
Camera’s rear panel and attach it to the network.
Page 8
2. Attach the external power supply
Attach the external power adapter to the DC power input connector located
on AWS2100’s rear panel and connect it to your local power supply.
3. Install the stand
Follow the instructions to assemble the stand and connect the stand to the base of
Internet Camera.
Security
Internet Camera is a network camera. After connecting to the network, users can log
in remotely. To protect your data, please change your password when you use
Internet Camera for the first time. You can also change the password after resetting
the system default to protect your data.
Software Installation
This section shows you how to set up Internet Camera via Internet browser.
Page 9
Web Configuration
1. Open
Activate the Internet browser and enter the defaulted IP address (192.168.0.99).
Press Enter to activate Internet Camera setup page.
Caution:
Your PC has to be on the same subnet as the Internet Camera defaulted address.
(for example: PC’s IP address192.168.0.100 ｡A Internet Camera: IP address
192.168.0.99)
2. Log-in
Enter the defaulted password (user) to activate the Internet Camera User mode
setup page.
Enter the defaulted password (admin) to activate the Internet Camera Administrator
mode setup page.
Page 10
Caution:
Please change your password right after login for the protection of your data and
system.
3. System setup
Image Parameter
Page 11
1. Resolution
You can adjust Image resolution QVGA (320*240) or VGA(640*480)
2. Anti-flicker
You can adjust the frequency 50HZ or 60HZ
3. Image Quality
You can adjust Image’s quality for High ,Middle,Low
4. Image Brightness
You can adjust Image’s brightness for High ,Middle,Low
5. Image Orientation
You can adjust Image Orientation for Normal or Upside Down
Network Configuration(Administrator mode only)
Page 12
Page 13
1. Select Fixed IP or ADSL PPPoE
2. If you use Fixed IP to connect , just fill the IP Address as you want to set.
3. If you use ADSL PPPoE you can fill the User’s ID and User’s Password that
provide by your ISP.
Fill the email address and SMTP server can let Internet Camera alert you the new
IP Address .
Page 14
Change Password(Administrator mode only)
Enter old password enter new password Press Save Complete
MONITOR
Please make certain that your browser supports Java JVM 1.3.1 and above. For
details of JVM, please refer to http://java.sun.com/
Browser environment
(1) Windows 98，2000，Me：
Page 15
Browser should be defaulted to support JVM. If you have a hard time
playing images, please check the JVM Version regarding downloading
and installation under Windows XP.
(2) Windows XP:
If your browser is a new version under Windows XP and cannot
support JVM, please check
http://java.sun.com/products/archive/ for downloading and installation.
(2) Netscape & Mozilla｡G
If your browser is Netscape or Mozilla, please check whether your Plugins
support JAVA-Applet.
If not, please connect to http://wp.netscape.com/plugins/index.html
Choose MIME-TYPE application/x-java-applet
Page 16
Please select the proper version for downloading and installation according to
your operation system.
Loading...