Geovision GV-PA191 Installation Guide

GV-PA191 PoE Adapter

The GV-PA191 is a Power over Ethernet (PoE) adapter designed to provide power to the IP
device through a single Ethernet cable. Adopting the PoE adapter enables you to mount an
IP device anywhere in a building where power outlets are not available.

Packing List

1. GV-PA191 PoE Adapter x 1

2. AC Power Adapter x 1

3. Installation Guide x 1

Overview

Connections

Two Ethernet cables are required for the connection.

1. Connect one end of the first Ethernet cable into the LAN 10 / 100 port on the GV-PA191,
and the other end to the hub connecting to the computer which will be used to access the
IP device.

2. Connect one end of the second Ethernet cable into the PoE 10 / 100 port on the GV­PA191, and the other end to the IP device.

3. Insert the white-dotted wire of the supplied AC Powe r Adapter into the left-side pin (+) of
the terminal block on the GV-PA191, and the black wire to the right-side pin (-).

4. Connect the other end of the supplied AC Pow e r Adapter to the power outlet. The
Power LED on the front panel of the GV-PA191 turns green now.

September 9, 2010

Specifications

PoE Standard IEEE 802.3af Power over Ethernet / PSE

1

PoE Output (10 / 100 Out)

Ethernet Cable Length

Power Input

Operation Temperature

Dimensions (L x W x H)

Weight

DC 48 V, 400 mA (19 W Max.)
Max 100 m / 328 ft from Hub to IP device, CAT5

DC 48 V, 400 mA

-10 °C ~ 50 °C / 14 °F ~ 122 °F

43 x 69 x 40 mm / 1.69 x 2.72 x 1.57 in

130 g / 0.29 lb

2

September 9, 2010